B. Romero-Ángeles

发表

Amplitude-modulated acoustic waves by nonlinear optical signals in bimetallic Au-Pt nanoparticles and ethanol based nanofluids

M. Trejo-Valdez, C. Torres‐Torres, E. A. Hurtado-Aviles, 2018, Journal of Molecular Liquids.

Antigravity Device for Intravertebral Rehabilitation

G. Urriolagoitia-Sosa, G. Urriolagoitia-Calderón, C. R. Torres-SanMiguel, 2020 .

High-Biofidelity Biomodel Generated from Three-Dimensional Imaging (Cone-Beam Computed Tomography): A Methodological Proposal

Guillermo Urriolagoitia-Sosa, Beatriz Romero-Ángeles, Guillermo Urriolagoitia-Calderón, 2020, Comput. Math. Methods Medicine.

Numerical Analysis of the Knee Articulation Leg. The Angular Position Parameters and Forces Acting on the Joint Were Obtained and Applied into the Corresponding, During Different Stages of the Gait Process

Christopher René Torres San Miguel, Rafael Rodríguez-Martínez, Guillermo Urriolagoitia-Sosa, 2019 .

Numerical Analysis of Masticatory Forces on a Lower First Molar considering the Contact between Dental Tissues

G. Urriolagoitia-Sosa, R. A. Hernández-Vázquez, J. A. Vázquez-Feijoo, 2018, Applied bionics and biomechanics.

Design and Manufacture of a Forearm Prosthesis by Plastic 3D Impression for a Patient with Transradial Amputation Applied for Strum of a Guitar

Christopher René Torres San Miguel, Rafael Rodríguez-Martínez, Guillermo Urriolagoitia-Sosa, 2019 .

Numerical Analysis of a Dental Zirconium Restoration and the Stresses That Occur in Dental Tissues

Rodrigo Arturo Marquet-Rivera, G. Urriolagoitia-Sosa, R. A. Hernández-Vázquez, 2019, Applied bionics and biomechanics.

Proposal by simple design of the lower limb exoskeleton of continuous use, provided of own mobility and body load support. Case: application due to an illness

Rafael Rodríguez-Martínez, Guillermo Urriolagoitia-Sosa, Beatriz Romero-Ángeles, 2017 .

Crack-compliance method for assessing residual stress due to loading/unloading history: Numerical and experimental analysis

Luis Héctor Hernández-Gómez, Guillermo Urriolagoitia-Sosa, Beatriz Romero-Ángeles, 2011 .

Numerical Analysis of Zirconium and Titanium Implants under the Effect of Critical Masticatory Load

F. Gallegos-Funes, G. Urriolagoitia-Sosa, G. Urriolagoitia-Calderón, 2022, Materials.

High Biofidelity 3D Biomodel Reconstruction from Soft and Hard Tissues (Knee), FEM, and 3D Printing: A Three-Dimensional Methodological Proposal

Rosa Alicia Hernández-Vázquez, Rodrigo Arturo Marquet-Rivera, G. Urriolagoitia-Sosa, 2021, BioMed research international.

Three-dimensional reconstruction for use in medicine and biomechanics

Christopher René Torres San Miguel, Guillermo Urriolagoitia-Sosa, Beatriz Romero-Ángeles, 2018 .

Simplified Test Bench Used to Reproduce Child Facial Damage During a Frontal Collision

Beatriz Romero-Ángeles, Guillermo Urriolagoitia-Sosa, Christopher René Torres-SanMiguel, 2020 .

Design and manufacture of a customised temporomandibular prosthesis

J. J. Hernández-Gómez, Guillermo Urriolagoitia-Sosa, Beatriz Romero-Ángeles, 2019, Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería.

Conceptual design and finite element method validation of a new type of self-locking hinge for deployable CubeSat solar panels

Carlos Couder-Castañeda, J. J. Hernández-Gómez, Guillermo Urriolagoitia-Sosa, 2019, Advances in Mechanical Engineering.

Numerical Analysis of the ACL, with Sprains of Different Degrees after Trauma

Rosa Alicia Hernández-Vázquez, Rodrigo Arturo Marquet-Rivera, G. Urriolagoitia-Sosa, 2021, Computational and mathematical methods in medicine.

Open Loop Control of a Hysteretic System with an Inverse Volterra with a DC Component

Beatriz Romero-Ángeles, Guillermo Urriolagoitia-Calderón, Rodrigo Arturo Marquet-Rivera, 2021, Computación y Sistemas.

Numerical and Experimental Analysis in the Manipulation of the Mechanical Properties for Enhancing the Mechanical Resistance of a Material

A. Michtchenko, L. Hernández-Gómez, G. Urriolagoitia-Sosa, 2011 .

Numerical simulation of the shot peening process under previous loading conditions

G. Urriolagoitia-Sosa, G. Urriolagoitia-Calderón, B. Romero-Ángeles, 2015 .

Pure Bending Determination of Stress-Strain Curves for an Aluminum Alloy

L. Hernández-Gómez, G. Urriolagoitia-Sosa, G. Urriolagoitia-Calderón, 2011 .

Using fracture mechanics for determining residual stress fields in diverse geometries

Luis Héctor Hernández-Gómez, Beatriz Romero-Ángeles, Guillermo Urriolagoitia-Calderón, 2012 .

Prediction of crack growth direction by Strain Energy Sih's Theory on specimens SEN under tension-compression biaxial loading employing Genetic Algorithms

G. Urriolagoitia-Sosa, E. Lugo-González, G. Urriolagoitia-Calderón, 2011 .

Mechanical design and manufacture by powder technology of a new mandrel tool for the fabrication of assault rifle barrels

Luis Héctor Hernández-Gómez, Guillermo Urriolagoitia-Sosa, Beatriz Romero-Ángeles, 2012 .

Bilinear Numerical Analysis of the Structural Behavior of a Dental Implant Applied as a Biomaterial Carbon Fiber Reinforced Polyether-Ether-Ketone (CFR-PEEK): A Finite Element Analysis

G. Urriolagoitia-Sosa, G. Urriolagoitia-Calderón, B. Romero-Ángeles, 2023, Dental Hypotheses.

Numerical Evaluation Using the Finite Element Method on Frontal Craniocervical Impact Directed at Intervertebral Disc Wear

G. Urriolagoitia-Sosa, G. Urriolagoitia-Calderón, B. Romero-Ángeles, 2023, Applied Sciences.