Pietro Mario Lugarà

发表

Incubation effect in burst mode fs-laser ablation of stainless steel samples

Antonio Ancona, Caterina Gaudiuso, Giuseppe Giannuzzi, 2018, LASE.

Non-Uniform Laser Surface Texturing of an Un-Tapered Square Pad for Tribological Applications

Pietro Mario Lugarà, Giuseppe Carbone, Antonio Ancona, 2017 .

Photoacoustic Techniques for Trace Gas Sensing Based on Semiconductor Laser Sources

Vincenzo Spagnolo, Pietro Mario Lugarà, Cinzia Di Franco, 2009, Sensors.

Laser self-mixing sensor to monitor in situ the penetration depth during short pulse laser drilling of metal targets

Francesco P. Mezzapesa, Gaetano Scamarcio, Francesco De Lucia, 2011, Optical Metrology.

A Real-Time Spectroscopic Sensor for Monitoring Laser Welding Processes

Antonio Ancona, Pietro Mario Lugarà, Vincenzo Berardi, 2009, Sensors.

Optical and Electronic NOx Sensors for Applications in Mechatronics

Vincenzo Spagnolo, Gaetano Scamarcio, Pietro Mario Lugarà, 2009, Sensors.

Spectroscopic closed loop control of penetration depth in laser beam welding process

Pietro Mario Lugarà, Antonio Ancona, Teresa Sibillano, 2012, LASE.

Femtosecond fiber laser welding of PMMA

Pietro Mario Lugarà, Roberto Osellame, Antonio Ancona, 2015, Photonics West - Lasers and Applications in Science and Engineering.

Trace gas sensing using quantum cascade lasers and optoacoustic detection

Vincenzo Spagnolo, Gaetano Scamarcio, Pietro Mario Lugarà, 2009, OPTO.

Closed Loop Control of Penetration Depth during CO2 Laser Lap Welding Processes

Francesco P. Mezzapesa, Antonio Ancona, Bert Huis in 't Veld, 2012, Sensors.

1-D and 2-D surface structuring of steel by bursts of femtosecond laser pulses

Gaetano Scamarcio, Caterina Gaudiuso, Pietro Mario Lugarà, 2019, LASE.

Laser surface micro-texturing to enhance the frictional behavior of lubricated steel

Francesco P. Mezzapesa, Pietro Mario Lugarà, Giuseppe Carbone, 2014, Photonics West - Lasers and Applications in Science and Engineering.

Plasma Plume Oscillations Monitoring during Laser Welding of Stainless Steel by Discrete Wavelet Transform Application

Antonio Ancona, Pietro Mario Lugarà, Teresa Sibillano, 2010, Sensors.

Advanced optoacoustic sensor designs for environmental applications

Vincenzo Spagnolo, Gaetano Scamarcio, Pietro Mario Lugarà, 2010, Optical Engineering + Applications.

Quantum Cascade Laser-Based Photoacoustic Sensor for Trace Detection of Formaldehyde Gas

Vincenzo Spagnolo, Gaetano Scamarcio, Pietro Mario Lugarà, 2009, Sensors.

Photoacoustic detection of nitric oxide by use of a quantum-cascade laser.

Pietro Mario Lugarà, Angela Elia, Corrado Giancaspro, 2005, Optics letters.

A computational approach to the characterization of a microfluidic device for continuous size-based inertial sorting

Giuseppe Pascazio, Pietro Mario Lugarà, Roberto Osellame, 2017 .

Large area laser-induced periodic surface structures on steel by bursts of femtosecond pulses with picosecond delays

Gaetano Scamarcio, Caterina Gaudiuso, Giuseppe Giannuzzi, 2019, Optics and Lasers in Engineering.

Photoacoustic Spectroscopy with Quantum Cascade Lasers for Trace Gas Detection

Gaetano Scamarcio, Pietro Mario Lugarà, Cinzia Di Franco, 2006, Sensors (Basel, Switzerland).

Femtosecond laser full and partial texturing of steel surfaces to reduce friction in lubricated contact

Pietro Mario Lugarà, Giuseppe Carbone, Antonio Ancona, 2014 .

A study of the shielding gas influence on the laser beam welding of AA5083 aluminium alloys by in-process spectroscopic investigation

Pietro Mario Lugarà, Antonio Ancona, Teresa Sibillano, 2006 .

Minimize friction of lubricated laser-microtextured-surfaces by tuning microholes depth

Francesco P. Mezzapesa, Pietro Mario Lugarà, Giuseppe Carbone, 2014 .

A sensing torch for on-line monitoring of the gas tungsten arc welding process of steel pipes

Pietro Mario Lugarà, Antonio Ancona, P. M. Lugarà, 2004 .

Correlation spectroscopy as a tool for detecting losses of ligand elements in laser welding of aluminium alloys

Pietro Mario Lugarà, Teresa Sibillano, A. Ancona, 2006 .

Incubation during laser ablation with bursts of femtosecond pulses with picosecond delays.

Caterina Gaudiuso, Giuseppe Giannuzzi, Isabelle Choquet, 2018, Optics express.

Spectroscopic, energetic and metallographic investigations of the laser lap welding of AISI 304 using the response surface methodology

Pietro Mario Lugarà, Antonio Ancona, Teresa Sibillano, 2011 .

Real-time monitoring of laser welding by correlation analysis: The case of AA5083

Pietro Mario Lugarà, Antonio Ancona, Teresa Sibillano, 2007 .

Trace gas sensing using quantum cascade lasers and a fiber-coupled optoacoustic sensor: Application to formaldehyde

Vincenzo Spagnolo, Gaetano Scamarcio, Pietro Mario Lugarà, 2010 .

Comparison of two different nozzles for laser beam welding of AA5083 aluminium alloy

Pietro Mario Lugarà, Antonio Ancona, Teresa Sibillano, 2005 .

An analysis of the shielding gas flow from a coaxial conical nozzle during high power CO2 laser welding

Giuseppe Pascazio, Pietro Mario Lugarà, Antonio Ancona, 2006 .

High-resolution monitoring of the hole depth during ultrafast laser ablation drilling by diode laser self-mixing interferometry.

Gaetano Scamarcio, Francesco De Lucia, Pietro Mario Lugarà, 2011, Optics letters.

Optical detection of conduction/keyhole mode transition in laser welding

Pietro Mario Lugarà, Antonio Ancona, Teresa Sibillano, 2007 .

Correlation analysis in laser welding plasma

Pietro Mario Lugarà, Antonio Ancona, Teresa Sibillano, 2005 .