Didem Ovalı

发表

Photocatalytic Efficiency of ZnO/TiO2 Composite Plates in Degradation of RR180 Dye Solutions

H. C. Yatmaz, C. Duran, Koray Öztürk, 2010 .

Effects of excess reactant amounts on the mechanochemically synthesized molybdenum silicides from MoO3, SiO2 and Mg blends

M. Öveçoğlu, D. Ağaoğulları, Didem Ovalı, 2017 .

Room-temperature synthesis of tungsten silicide powders using various initial systems

M. Öveçoğlu, D. Ağaoğulları, Didem Ovalı, 2019, International Journal of Refractory Metals and Hard Materials.

Characterization of SiO2-encapsulated WSi2/W5Si3 nanoparticles synthesized by a mechanochemical route

M. Öveçoğlu, D. Ağaoğulları, Didem Ovalı, 2018, Ceramics International.

In situ synthesis of NbB2–NbC composite powders by milling-assisted carbothermal reduction of oxide raw materials

M. Öveçoğlu, Ö. Balcı, D. Ağaoğulları, 2015 .

Spark plasma sintering of molybdenum silicides synthesized from oxide precursors

K. Prashanth, L. Kollo, D. Ağaoğulları, 2021 .

Mechanochemical synthesis and characterisation of niobium silicide nanoparticles

M. Öveçoğlu, D. Ağaoğulları, Didem Ovalı, 2019, Ceramics International.

Effect of tungsten disilicide addition on tungsten boride based composites produced by milling-assisted pressureless sintering

M. Öveçoğlu, D. Ağaoğulları, H. Gökçe, 2018 .

Characterization of mechanically alloyed and pressureless sintered Al-7 wt% Si-2 wt% LaB6-2 wt% (MoSi2, WSi2) hybrid composites

M. Öveçoğlu, Yakup Yürektürk, D. Ağaoğulları, 2019, Advanced Powder Technology.

Investigation of Mechanochemical Synthesized Tungsten Silicides from WO3, SiO2 and Mg Blends

M. Öveçoğlu, Didem Ovalı, 2016 .

Effects of the matrix crystallinity, dispersed phase, and processing type on the morphological, thermal, and mechanical properties of polylactide-based binary blends with poly[(butylene adipate)-co -terephthalate] and poly[(butylene succinate)-co -adipate]

M. Nofar, Didem Ovalı, Hazal Oğuz, 2019, Journal of Applied Polymer Science.

Polyamide 12/Antimony Trioxide/Sepiolite or Boron Composites: Mechanical Properties and Flame Retardancy

Şeyma Duman, Didem Ovalı, A. Öztürk, 2020 .

Effects of oxide particles on the microstructural and mechanical properties of W-Ni-WB composites

M. Öveçoğlu, Ö. Balcı, D. Ağaoğulları, 2020, Particulate Science and Technology.

Development of PLA-PBAT and PLA-PBSA bio-blends: Effects of processing type and PLA crystallinity on morphology and mechanical properties

M. Nofar, D. Kara, C. Doğan, 2019 .