J. C. Nicholas

发表

The Effect of Bearing Support Flexibility on Critical Speed Prediction

Lloyd E. Barrett, J. C. Nicholas, 1986 .

Effect of Residual Shaft Bow on Unbalance Response and Balancing of a Single Mass Flexible Rotor—Part I: Unbalance Response

E. J. Gunter, Paul E. Allaire, J. C. Nicholas, 1976 .

Stiffness and Damping Coefficients for the Five-Pad Tilting-Pad Bearing

Paul E. Allaire, E. J. Gunter, J. C. Nicholas, 1979 .

Analysis of Step Journal Bearings—Finite Length, Stability

Paul E. Allaire, J. C. Nicholas, P. Allaire, 1980 .

Pressure dam bearing design for optimum turbomachinery stability

J. C. Nicholas, 1982 .

Thermohydrodynamic Modeling of Leading-Edge Groove Bearings under Starvation Condition

Paul E. Allaire, Lloyd E. Barrett, J. C. Nicholas, 2005 .

Theory and Application of Multipocket Bearings for Optimum Turborotor Stability

R. G. Kirk, J. C. Nicholas, 1981 .

Systems of Finite Elements for Finite Bearings

E. J. Gunter, Paul E. Allaire, J. C. Nicholas, 1977 .

Closure to “Discussions of ‘Effect of Residual Shaft Bow on Unbalance Response and Balancing of a Single Mass Flexible Rotor—Parts I and II’” (1976, ASME J. Eng. Power, 98, pp. 187–188)

E. J. Gunter, Paul E. Allaire, J. C. Nicholas, 1976 .

Discussion: “A Class of Maximum Load Capacity Sector Thrust Bearings” (Gregory, E. W., and Maday, C. J., 1977, ASME J. Lubr. Technol., 99, pp. 180–184)

Paul E. Allaire, J. C. Nicholas, 1977 .

Analysis and Identification of Subsynchronous Vibration for a High Pressure Parallel Flow Centrifugal Compressor

R. G. Kirk, J. C. Nicholas, R. C. Murphy, 1982 .

Utilizing dynamic support stiffness for improved rotordynamic calculations

J. C. Nicholas, 1999 .

Stiffness and Damping Coefficients for Finite Length Step Journal Bearings

Paul E. Allaire, J. C. Nicholas, D. W. Lewis, 1980 .

Lund’s Tilting Pad Journal Bearing Pad Assembly Method

J. C. Nicholas, 2003 .

Rotor-Bearing Dynamics Technology Design Guide. Part V. Dynamic Analysis of Incompressible Fluid Film Bearings.

Paul E. Allaire, J. C. Nicholas, Coda H T Pan, 1980 .

Closure to “Discussions of ‘Four Pad Tilting Pad Bearing Design and Application for Multistage Axial Compressors’” (1982, ASME J. Lubr. Technol., 104, pp. 530–532)

R. G. Kirk, J. C. Nicholas, J. Nicholas, 1982 .

Analysis of Step Journal Bearings—Infinite Length, Inertia Effects

Paul E. Allaire, Lloyd E. Barrett, J. C. Nicholas, 1979 .

Stability, Load Capacity, Stiffness, and Damping Advantages of the Double Pocket Journal Bearing

J. C. Nicholas, J. Nicholas, 1985 .

Four Pad Tilting Pad Bearing Design and Application for Multistage Axial Compressors

R. G. Kirk, J. C. Nicholas, 1982 .

Experimental-Theoretical Comparison of Instability Onset Speeds for a Three Mass Rotor Supported by Step Journal Bearings

L. E. Barrett, J. C. Nicholas, M. E. Leader, 1980 .