Wakhid Ahmad Jauhari

Wakhid Ahmad Jauhari, Selvia Mayangsari, Nughtoh Arfawi Kurdhi, 2016, 2016 2nd International Conference of Industrial, Mechanical, Electrical, and Chemical Engineering (ICIMECE).

The evaluation of criteria and subcriteria of research project selection using fuzzy analytical hierarchy process method

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Christina Ayu Kusumawardani, 2016, 2016 2nd International Conference of Industrial, Mechanical, Electrical, and Chemical Engineering (ICIMECE).

Model Pengukuran Kinerja dengan Menggunakan Metode Integrated Performance Measurement Systems dan Analytical Hierarchy Process

Wakhid Ahmad Jauhari, Azizah Aisyati, Dwiningsih Mulyaningtyas, 2012 .

Analisis Pengendalian Persediaan Spare Part Mesin Produksi di PT. Prima Sejati Sejahtera dengan Metode Continuous Review

Wakhid Ahmad Jauhari, Endah Budiningsih, 2017 .

Inventory decisions in a closed-loop supply chain system with learning and rework

Wakhid Ahmad Jauhari, Oktiviandri Hendaryani, Nughthoh Arfawi Kurdhi, 2018 .

A Quality Improvement Model Based on Taguchi’s Loss Function Considering Imperfect Quality Inspection

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Maghfira Devi Ramadhanty, 2019 .

A collaborative inventory model for vendor-buyer system with inspection errors, unequal sized shipment, and repairable item

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Irfan Hilmi Hamdani, 2017 .

Analisis Sistem Antrian di Plasa Telkom Solo dengan Metode Simulasi

Wakhid Ahmad Jauhari, Eko Liquiddanu, Yaning Tri Hapsari, 2009 .

Scheduling of undergraduate thesis examination: a case study in Industrial Engineering Department of Universitas Sebelas Maret

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Endah Budiningsih, 2019, Journal of Industrial Engineering International.

Pengembangan Model Persediaan Single Vendor-Single Buyer dengan Lead Time Dapat Dikontrol

Wakhid Ahmad Jauhari, 2007 .

A vendor-buyer integrated inventory model with defective items, production cost and equal-sized delivery

Wakhid Ahmad Jauhari, 2014, Int. J. Bus. Perform. Supply Chain Model..

Developing Inventory Policy for Aircraft Spare Parts using Periodic Review Model

Wakhid Ahmad Jauhari, Azizah Aisyati, Cucuk Nur Rosyidi, 2015 .

Determination Inventory Level for Aircraft Spare Parts Using Continuous Review Model

Wakhid Ahmad Jauhari, Azizah Aisyati, Cucuk Nur Rosyidi, 2013 .

Perancangan Sistem Informasi Monitoring Persediaan Bahan Kimia dengan Pendekatan Persediaan Continuous Review (Studi Kasus: Departemen Printing-Dyeing PT Kusumahadi Santosa)

Wakhid Ahmad Jauhari, Yusuf Priyandari, Ikhsan Aditama, 2015 .

PENETAPAN TINGKAT PERSEDIAAN SPARE PARTFORKLIFT MEREK PATRIA DENGAN PENDIKATAN MODELPERSEDIAAN SINGLE ITEM (StudI Kasus di PTUnited Tractors Tbk. Cabang Surabaya)

Wakhid Ahmad Jauhari, 2010 .

PERBAIKAN MIN-MAX DISTRIBUSI DENGAN MULTIPLE CRITERIA ABC ANALYSIS NG-MODEL UNTUK PENGOPTIMALAN LIST PART NUMBER (STUDI KASUS PADA PT GARUDA MAINTENANCE FACILITY AERO ASIA TBK)

Wakhid Ahmad Jauhari, Zulhendra Hanif, muhammad Hisjam, 2019 .

A stochastic periodic review inventory model for vendor–buyer system with setup cost reduction and service–level constraint

Wakhid Ahmad Jauhari, Rendy Surya Saga, 2017 .

Quality Improvement Model Considering Rework and Imperfect Inspection

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Kuncoro Sakti Pambudi, 2019 .

Make or buy analysis model based on tolerance allocation to minimize manufacturing cost and fuzzy quality loss

Wakhid Ahmad Jauhari, Kunihiro Hamada, Bambang Suhardi, 2016 .

An integrated optimisation model of refinery short-term planning: a case study

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Fandy Achmad Prasetyo Utomo, 2020 .

Penentuan Frekuensi Perjalanan Angkutan Umum Batik Solo Trans untuk Mengoptimalkan Jumlah Pendapatan

Wakhid Ahmad Jauhari, Yusuf Priyandari, Ayu Sally Damayanti, 2012 .

A SINGLE-VENDOR SINGLE-BUYER INTEGRATED PRODUCTION-INVENTORY MODEL WITH QUALITY IMPROVEMENT AND CONTROLLABLE PRODUCTION RATE

Wakhid Ahmad Jauhari, 2017 .

Pemilihan Pemasok Drum Pelumas Industri Menggunakan Fuzzy Analytical Hierarchy Process (Studi Kasus: PT. Pertamina Pusat dan Production Unit Gresik)

Wakhid Ahmad Jauhari, Cucuk Nur Rosydi, D. A. Mardhikawarih, 2012 .

Inventory model optimization for supplier-manufacturer-retailer system with rework and waste disposal

Wakhid Ahmad Jauhari, Anindya Rachma Dwicahyani, Pringgo Widyo Laksono, 2017 .

PERBAIKAN PROSES PRODUKSI IKM XYZ BERDASARKAN KRITERIA CPPB-IRT, WISE, DAN SJH LPPOM MUI

Wakhid Ahmad Jauhari, Bambang Suhardi, Serlita Vidinia Wardani, 2019 .

Perancangan Sistem Informasi Manajemen Tiket Bus Online Berbasis Web (Studi Kasus: Agen PO. Harapan Jaya di Sragen)

Wakhid Ahmad Jauhari, Munifah, Dedi Triyanto, 2013 .

Model Persediaan Pemasok-Pembeli Dengan Produk Cacat Dan Kecepatan Produksi Terkontrol.

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Nelita Putri Sejati, 2016 .

Investigating carbon emissions in a production-inventory model under imperfect production, inspection errors and service-level constraint

Wakhid Ahmad Jauhari, Anindya Rachma Dwicahyani, Pringgo Widyo Laksono, 2019, International Journal of Logistics Systems and Management.

A periodic review integrated inventory model with controllable setup cost, imperfect items, and inspection errors under service level constraint

Wakhid Ahmad Jauhari, Pringgo Widyo Laksono, Rendy Surya Saga, 2017 .

A supply chain inventory model for vendor-buyer system with defective items and imperfect inspection process

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Imanuel Prasetyo Widianto, 2017, Int. J. Math. Oper. Res..

A fuzzy periodic review integrated inventory model involving stochastic demand, imperfect production process and inspection errors

Wakhid Ahmad Jauhari, Nughthoh Arfawi Kurdhi, Kuan Yew Wong, 2017 .

Re-designing an Assembly Lines at an Automotive Manufacturing Company

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Leonard Leymena, 2019 .

Inventory model optimisation for a closed-loop retailer-manufacturer-supplier system with imperfect production, reworks and quality dependent return rate

Wakhid Ahmad Jauhari, Anindya Rachma Dwicahyani, Pringgo Widyo Laksono, 2020, International Journal of Services and Operations Management.

Perancangan Sistem Pengukuran Kinerja Organisasi Non Profit (Studi Kasus pada UTDC PMI Surakarta)

Wakhid Ahmad Jauhari, Eko Liquiddanu, Eka Agustina Nugraheni, 2010 .

Cooperative vendor-buyer model with imperfect quality, inspection errors, and shortage backordering

Wakhid Ahmad Jauhari, Pringgo Widyo Laksono, Rahmad Sulistyanto, 2015, Proceedings of the Joint International Conference on Electric Vehicular Technology and Industrial, Mechanical, Electrical and Chemical Engineering (ICEVT & IMECE).

An optimization model of undergraduate thesis examination scheduling in department of industrial engineering, Sebelas Maret University

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Endah Budiningsih, 2019 .

Capacitated set-covering model considering the distance objective and dependency of alternative facilities

Wakhid Ahmad Jauhari, I Wayan Suletra, Yusuf Priyandari, 2018 .

Penentuan Faktor-Faktor Bahaya yang Dihadapi Perawat diRSUD Kabupaten Karanganyar dan Usulan PencegahannyaMenggunakan Metode AHP

Wakhid Ahmad Jauhari, Irwan Iftadi, Agarika Fatmasari, 2011 .

Perancangan Alat Pengemas Vakum Untuk Produk Olahan Jamur Tiram Dalam Rangka Meningkatkan Nilai Jual Dan Masa Pakai

Wakhid Ahmad Jauhari, Irwan Iftadi, Hary Purwoko Atmojo Sung Sumargo, 2013 .

PENENTUAN MODEL PERSEDIAAN SPARE PART DENGAN MEMPERTIMBANGKAN TERJADINYA BACKORDER

Wakhid Ahmad Jauhari, 2009 .

Integrated inventory model for single vendor-single buyer with probabilistic demand

Wakhid Ahmad Jauhari, I Nyoman Pujawan, Yusuf Priyandari, 2011 .

A Closed-Loop Supply Chain Model with Rework Process and Learning Effect

Wakhid Ahmad Jauhari, Oktiviandri Hendaryani, Nughtoh Arfawi Kurdi, 2016 .

A concurrent optimization model for suppliers selection, tolerance and component allocation with fuzzy quality loss

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, C. N. Rosyidi, 2016 .

An Integrated Optimization Model for Product Design and Production Allocation in a Make to Order Manufacturing System

Wakhid Ahmad Jauhari, Ani Fatmawati, Cucuk Nur Rosyidi, 2016 .

A critical spare part inventory control based on hazard function approach: A case study in a garment company

Wakhid Ahmad Jauhari, Intan Dewi Melinda, 2018 .

Inventory‐based optimization of a two‐echelon fossil‐fuelled energy storage system

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, C. N. Rosyidi, 2020 .

Joint economic lot size (JELS) model for single-vendor single-buyer with variable production rate and partial backorder

Wakhid Ahmad Jauhari, I Nyoman Pujawan, 2014 .

A closed-loop supply chain model for supplier-manufacturer-retailer system with rework and waste disposal

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Eva Kholisoh, 2016, 2016 2nd International Conference of Industrial, Mechanical, Electrical, and Chemical Engineering (ICIMECE).

Make or Buy Analysis Model Based on Tolerance Design to Minimize Manufacturing Cost and Quality Loss

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Reza Rizkichani Akbar, 2014 .

Simultaneous component and tolerance allocation through suppliers’ selection considering technological capability and production capacity to minimise purchasing cost and quality loss

Wakhid Ahmad Jauhari, Cucuk Nur Rosyidi, Noviasari Sabatini, 2013 .

An integrated inventory model for supplier-manufacturer-retailer system with imperfect quality and inspection errors

Wakhid Ahmad Jauhari, Nughthoh Arfawi Kurdhi, Pringgo Widyo Laksono, 2016 .