D. MacDonald

发表

In vivo compatibility of Dynesys® spinal implants: a case series of five retrieved periprosthetic tissue samples and corresponding implants

S. Kurtz, C. Roeder, M. Steinbeck, 2015, European Spine Journal.

Fretting Corrosion, Third-Body Polyethylene Damage, and Cup Positioning in Primary vs Revision Dual Mobility Total Hip Arthroplasty.

S. Kurtz, Gwo-Chin Lee, Michael A. Mont, 2021, The Journal of arthroplasty.

Corrosion Damage and Wear Mechanisms in Long-Term Retrieved CoCr Femoral Components for Total Knee Arthroplasty.

S. Kurtz, C. Rimnac, A. Malkani, 2016, The Journal of arthroplasty.

Does Taper Size Have an Effect on Taper Damage in Retrieved Metal-on-Polyethylene Total Hip Devices?

S. Kurtz, C. Rimnac, J. Gilbert, 2016, The Journal of arthroplasty.

Is increased modularity associated with increased fretting and corrosion damage in metal-on-metal total hip arthroplasty devices?: a retrieval study.

S. Kurtz, C. Rimnac, J. Gilbert, 2013, The Journal of arthroplasty.

Do Ceramic Femoral Heads Reduce Taper Fretting Corrosion in Hip Arthroplasty? A Retrieval Study

S. Kurtz, Gwo-Chin Lee, C. Rimnac, 2013, Clinical orthopaedics and related research.

Mechanical properties, oxidation, and clinical performance of retrieved highly cross-linked Crossfire liners after intermediate-term implantation.

S. Kurtz, M. Austin, P. Sharkey, 2010, The Journal of arthroplasty.

What Is the Incidence of Cobalt-Chromium Damage Modes on the Bearing Surface of Contemporary Femoral Component Designs for Total Knee Arthroplasty?

S. Kurtz, C. Rimnac, Antonia F. Chen, 2018, The Journal of arthroplasty.

Does annealing improve the interlayer adhesion and structural integrity of FFF 3D printed PEEK lumbar spinal cages?

S. Kurtz, M. Marcolongo, Ryan L. Siskey, 2020, Journal of the mechanical behavior of biomedical materials.

Characterization of PEEK biomaterials using the small punch test.

S. Kurtz, D. Jaekel, D. MacDonald, 2011, Journal of the mechanical behavior of biomedical materials.

Severe impingement of lumbar disc replacements increases the functional biological activity of polyethylene wear debris.

S. Kurtz, M. Steinbeck, Ryan M. Baxter, 2013, The Journal of bone and joint surgery. American volume.

Mechanically assisted crevice corrosion damage in shoulder arthroplasty is comparable to hip arthroplasty

Gerald R. Williams, S. Kurtz, C. Rimnac, 2015 .

Does Metal Transfer Differ on Retrieved Ceramic and CoCr Femoral Heads?

S. Kurtz, Gwo-Chin Lee, C. Rimnac, 2015, BioMed research international.

Oxidation, Damage Mechanisms, and Reasons for Revision of Sequentially Annealed Highly Crosslinked Polyethylene in Total Knee Arthroplasty.

S. Kurtz, A. Malkani, Antonia F. Chen, 2017, The Journal of arthroplasty.

Does Cyclic Stress Play a Role in Highly Crosslinked Polyethylene Oxidation?

S. Kurtz, J. Puértolas, F. Pascual, 2015, Clinical orthopaedics and related research.

Retrieval analysis of PEEK rods for posterior fusion and motion preservation

S. Kurtz, S. Berven, M. Steinbeck, 2013, European Spine Journal.

Technical Note: Is Corrosion a Threat to the Strength of the Taper Connection in Femoral Components of Total Hip Replacements?

S. Kurtz, C. Rimnac, W. Mihalko, 2017 .

Polyethylene wear in retrieved reverse total shoulder components.

S. Kurtz, J. Day, Charles L. Getz, 2012, Journal of shoulder and elbow surgery.

Short-Term Surface Damage Mechanisms of Retrieved Highly Cross-Linked Polyethylene Patellar Components.

S. Kurtz, G. Klein, N. Piuzzi, 2022, The Journal of arthroplasty.

Retrieval Analysis of Cruciate-Retaining and Posterior-Stabilized Total Knee Arthroplasty and Correlations to Laxity and Wear.

S. Kurtz, W. Mihalko, C. Arnholt, 2020, The Journal of arthroplasty.

Reasons for Revision, Oxidation, and Damage Mechanisms of Retrieved Vitamin E-Stabilized Highly Crosslinked Polyethylene in Total Knee Arthroplasty.

S. Kurtz, Gwo-Chin Lee, Michael A. Mont, 2019, The Journal of arthroplasty.

The Natural History of Polyethylene Oxidation in Total Disc Replacement

S. Kurtz, A. van Ooij, J. Isaza, 2009, Spine.

What Is the Correlation of In Vivo Wear and Damage Patterns With In Vitro TDR Motion Response?

A. Patwardhan, S. Kurtz, M. Zindrick, 2008, Spine.

UHMWPE Wear Debris and Tissue Reactions Are Reduced for Contemporary Designs of Lumbar Total Disc Replacements

S. Kurtz, M. Steinbeck, S. Veruva, 2015, Clinical orthopaedics and related research.

The Latest Lessons Learned from Retrieval Analyses of Ultra-High Molecular Weight Polyethylene, Metal-on-Metal, and Alternative Bearing Total Disc Replacements.

S. Kurtz, M. Steinbeck, J. Goffin, 2012, Seminars in spine surgery.

Quantitative ultrahigh-molecular-weight polyethylene wear in total elbow retrievals.

S. Kurtz, M. Ramsey, J. Abboud, 2020, Journal of shoulder and elbow surgery.

Does Taper Angle Clearance Influence Fretting and Corrosion Damage at the Head-Stem Interface? A Matched Cohort Retrieval Study.

S. Kurtz, J. Day, J. Gilbert, 2013, Seminars in arthroplasty.

Mechanical properties of retrieved highly cross-linked crossfire liners after short-term implantation.

S. Kurtz, J. Parvizi, P. Sharkey, 2005, The Journal of arthroplasty.

Are the Wear and Osteolysis Outcomes Different between Annealed and Remelted First-Generation Highly Crosslinked Polyethylene after Long-Term Implantation?

S. Kurtz, Gwo-Chin Lee, C. Rimnac, 2020, The Journal of Hip Surgery.

Retrieval Analysis of Sequentially Annealed Highly Crosslinked Polyethylene Used in Total Hip Arthroplasty

S. Kurtz, J. Parvizi, W. Hozack, 2014, Clinical orthopaedics and related research.

Do First-generation Highly Crosslinked Polyethylenes Oxidize In Vivo?

S. Kurtz, C. Rimnac, A. Ianuzzi, 2011, Clinical orthopaedics and related research.

Do First-generation Highly Crosslinked Polyethylenes Oxidize In Vivo?

S. Kurtz, C. Rimnac, A. Ianuzzi, 2011, Clinical Orthopaedics and Related Research.

A systematic review of preclinical in vivo testing of 3D printed porous Ti6Al4V for orthopedic applications, part I: Animal models and bone ingrowth outcome measures.

S. Kurtz, M. Taheri, H. Spece, 2021, Journal of biomedical materials research. Part B, Applied biomaterials.

Characterization of polyaryletherketone (PAEK) filaments and printed parts produced by extrusion‐based additive manufacturing

S. Kurtz, D. MacDonald, Benjamin C. Streifel, 2021 .

Do Stem Taper Microgrooves Influence Taper Corrosion in Total Hip Arthroplasty? A Matched Cohort Retrieval Study.

S. Kurtz, Gwo-Chin Lee, C. Rimnac, 2017, The Journal of arthroplasty.

Microgrooved Surface Topography Does Not Influence Fretting Corrosion of Tapers in Total Hip Arthroplasty: Classification and Retrieval Analysis

S. Kurtz, Gwo-Chin Lee, C. Rimnac, 2015 .

Retrieval Analysis of Metal-on-Metal Total Hip Prostheses: Characterizing Fretting and Corrosion at Modular Interfaces

S. Kurtz, C. Rimnac, J. Day, 2013 .

Structure–property relationships for 3D-printed PEEK intervertebral lumbar cages produced using fused filament fabrication

Michele Marcolongo, Ryan Siskey, S. Kurtz, 2018, Journal of Materials Research.

Fretting and Corrosion Damage in Taper Adapter Sleeves for Ceramic Heads: A Retrieval Study.

S. Kurtz, Gwo-Chin Lee, C. Rimnac, 2017, The Journal of arthroplasty.

Mechanically assisted taper corrosion in modular TKA.

S. Kurtz, Gwo-Chin Lee, C. Rimnac, 2014, The Journal of arthroplasty.

Oxidative properties and surface damage mechanisms of remelted highly crosslinked polyethylenes in total knee arthroplasty

S. Kurtz, C. Rimnac, J. Parvizi, 2013, International Orthopaedics.

Clinical, radiological, histological and retrieval findings of Activ-L and Mobidisc total disc replacements: a study of two patients

S. Kurtz, P. Willems, I. Punt, 2012, European Spine Journal.

Derivation of Clinically Relevant Boundary Conditions Suitable for Evaluation of Chronic Impingement of Lumbar Total Disk Replacement: Application to Standard Development

S. Kurtz, J. Isaza, J. Day, 2011 .

Wear pattern observations from TDR retrievals using autoregistration of voxel data.

S. Kurtz, Y. Shkolnikov, A. Bowden, 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

Method of Characterizing Fretting and Corrosion at the Various Taper Connections of Retrieved Modular Components from Metal-on-Metal Total Hip Arthroplasty

S. Kurtz, C. Rimnac, J. Parvizi, 2013 .

Characteristics of highly cross-linked polyethylene wear debris in vivo.

S. Kurtz, M. Steinbeck, Ryan M. Baxter, 2013, Journal of biomedical materials research. Part B, Applied biomaterials.

Ceramic Heads Decrease Metal Release Caused by Head-taper Fretting and Corrosion

S. Kurtz, D. Macdonald, J. Gilbert, 2016, Clinical orthopaedics and related research.

Thermal Localization Improves the Interlayer Adhesion and Structural Integrity of 3D printed PEEK Lumbar Spinal Cages.

S. Kurtz, Ryan L. Siskey, D. MacDonald, 2020, Materialia.

Acoustic Parameters for Optimal Ultrasound-Triggered Release from Novel Spinal Hardware Devices.

S. Kurtz, F. Forsberg, N. Hickok, 2019, Ultrasound in medicine & biology.

Ultrasound-triggered antibiotic release from PEEK clips to prevent spinal fusion infection: Initial evaluations ✩

S. Kurtz, F. Forsberg, C. Kepler, 2019, Acta biomaterialia.

In Vivo Oxidation and Surface Damage in Retrieved Ethylene Oxide-sterilized Total Knee Arthroplasties

S. Kurtz, J. Parvizi, P. Sharkey, 2012, Clinical orthopaedics and related research.

Can Pin-on-Disk Testing Be Used to Assess the Wear Performance of Retrieved UHMWPE Components for Total Joint Arthroplasty?

S. Kurtz, M. Tohfafarosh, D. Baykal, 2014, BioMed research international.

Can Pinon-Disk Testing Be Used to Assess the Wear Performance of Retrieved UHMWPE Components for Total Joint Arthroplasty ?

S. Kurtz, M. Tohfafarosh, D. Baykal, 2014 .

Is There Material Loss at the Backside Taper in Modular CoCr Acetabular Liners?

S. Kurtz, J. Parvizi, M. Agne, 2015, Clinical orthopaedics and related research.

Gamma inert sterilization: a solution to polyethylene oxidation?

Javad Parvizi, William J Hozack, V. Goldberg, 2009, The Journal of bone and joint surgery. American volume.

Reasons for revision of first-generation highly cross-linked polyethylenes.

S. Kurtz, C. Rimnac, J. Parvizi, 2010, The Journal of arthroplasty.

Reasons of Revision for First-Generation Highly Crosslinked Polyethylenes

S. Kurtz, C. Rimnac, J. Parvizi, 2010 .

MicroCT Analysis of Wear and Damage in UHMWPE

S. Kurtz, A. Bowden, D. MacDonald, 2016 .

Chapter 34 – MicroCT Analysis of Wear and Damage in UHMWPE

S. Kurtz, A. Bowden, D. MacDonald, 2009 .

Is Taper Fretting Corrosion a Threat to the Clinical Performance of Large-Diameter Hips with Highly Crosslinked Polyethylene Bearings?

S. Kurtz, C. Rimnac, Antonia F. Chen, 2015 .