Sung‐Jei Hong

发表

The synthesis and characterization of metal nanoparticles using a modified electrolysis method for conductive ink in ink-jet printing technology.

Y. Choa, Kun-Jae Lee, K. Lee, 2008, Journal of nanoscience and nanotechnology.

ITO nanoparticles reused from ITO scraps and their applications to sputtering target for transparent conductive electrode layer

Jae-yong Lee, Youngsung Kim, Sangyup Song, 2017, Nano Convergence.

Optimization of solvent condition for highly luminescent Y2O3:Eu3+ nanophosphor

J. Han, M. Kwak, Sung‐Jei Hong, 2006 .

Development of Ultrafine Indium Tin Oxide (ITO) Nanoparticle for Ink-Jet Printing by Low-Temperature Synthetic Method

J. Han, Yong‐Hoon Kim, Sung‐Jei Hong, 2008, IEEE Transactions on Nanotechnology.

Effect of Polyvinylpolypyrrolidone Surfactant on Characteristics of Iron-Oxide Nanoparticles Synthesized by Using Recycled Waste Permanent Magnets

Sung‐Jei Hong, B. Kim, A. Jo, 2022, Micromachines.

A highly efficient indium tin oxide nanoparticles (ITO-NPs) transparent heater based on solution-process optimized with oxygen vacancy control

Jin-Woo Park, Jiyoung Kim, Mi Jung Lee, 2017 .

Characteristics of Indium Tin Oxide (ITO) Nanoparticles Recovered by Lift-off Method from TFT-LCD Panel Scraps

Yongkeun Son, Dongchul Choi, Sung‐Jei Hong, 2014, Materials.

Improvement of electrical properties of printed ITO thin films by heat-treatment conditions

Jong‐Woong Kim, J. Han, Sung‐Jei Hong, 2011 .

Development of ultrafine indium Tin Oxide (ITO) nanoparticle for ink jet printing by low temperature synthetic method

J. Han, Yong‐Hoon Kim, Sung‐Jei Hong, 2006, 2006 IEEE Nanotechnology Materials and Devices Conference.

Liquid Delivery Metal-Organic Chemical Vapor Deposition of Pb(ZrxTi1-x)O3 Thin Films for High-Density Ferroelectric Random Access Memory Application

Young-soo Park, Wan-Gyu Lee, J. Lee, 2002 .

Eco-friendly synthesis of SiO2 nanoparticles with high purity for digital printing

J. Han, Sung‐Jei Hong, 2010 .

Influence of Eu3+ doping content on photoluminescence of Gd2O3:Eu3+ phosphors prepared by liquid-phase reaction method

J. Han, D. Lee, Yo-seung Song, 2006 .

Improvement of particle size of indium tin oxide nanoparticles by in-situ dispersion method for solution based transparent heater

Jae-yong Lee, Sung‐Jei Hong, Young-sung Kim, 2016, Electronic Materials Letters.

Fabrication of High Density Y2O3 Ceramics by Magnetic Pulsed Compaction

Min Ku Lee, C. Rhee, Sung‐Jei Hong, 2007 .

Ultra-thin and smooth transparent electrode for flexible and leakage-free organic light-emitting diodes

Min-Gi Kwak, Namsu Kim, Sung-Jei Hong, 2015, Scientific Reports.

Effect of synthetic conditions on particle size and photo-luminescence properties of Y2O3:Eu3+ nanophosphor

J. Han, Sung‐Jei Hong, 2007 .

Indium tin oxide (ITO) thin film fabricated by indium–tin–organic sol including ITO nanoparticle

Jeong In Han, Sung-Jei Hong, J. Han, 2006 .

Electrical and surface properties of indium tin oxide (ITO) films by pulsed DC magnetron sputtering for organic light emitting diode as anode material

Y. Kang, D. Son, D. Jung, 2010 .

A flexible transparent heater with ultrahigh thermal efficiency and fast thermal response speed based on a simple solution-processed indium tin oxide nanoparticles-silver nanowires composite structure on photo-polymeric film

Jae-yong Lee, Mi Jung Lee, Chaewon Kim, 2018 .

Characterization of Nickel Oxide Nanoparticles Synthesized under Low Temperature

Sung‐Jei Hong, B. Kim, Young-sung Kim, 2021, Micromachines.

Effect of SiO2 nanoparticle doping on electro-optical properties of polymer dispersed liquid crystal lens for smart electronic glasses

J. Han, Yang Liu, Sung‐Jei Hong, 2015, Nano Convergence.

Fabrication of Core-Shell Structure of Ni/Au Layer on PMMA Micro-Ball for Flexible Electronics

J. Han, Sung-Jei Hong, Gyujeong Jeong, 2016 .

Effect of heat treatment on physical and electrical characteristics of conductive circuits printed on Si substrate

S. Jung, S. Lee, young-Seok Kim, 2011 .

Improved Charge Injection of Metal Oxide Thin‐Film Transistors by Stacked Electrodes of Indium Tin Oxide Nanoparticles and Silver Nanowires

Yong‐Young Noh, Sung-Jei Hong, Yong‐Hoon Kim, 2018 .

Highly dispersed indium‑tin-oxide nanoparticles synthesized using in-situ reverse reduction method and their application to transparent heater for extremely high temperature

Jae-yong Lee, Sung‐Jei Hong, Seung-jae Cha, 2018, Powder Technology.

Characteristics of indium-tin-oxide (ITO) nanoparticle ink-coated layers recycled from ITO scraps

Jae-yong Lee, Sung‐Jei Hong, Seung-jae Cha, 2015 .

Enhancement of the heating properties of thick-film heaters using ultrafine SiC nanoparticles and graphene

Beom-Jin Yoon, Eun Jin Park, Sung‐Jei Hong, 2015 .

P‐41: Novel Fabricating Process for Nanocrystalline Indium Tin Oxide Thin Film for Flexible Substrate by Low‐temperature One‐time Mixing and Oxidation LOMO

J. Han, Yong‐Hoon Kim, Sung‐Jei Hong, 2003 .

Ink-jet printing of Cu conductive ink on flexible substrate modified by oxygen plasma treatment

Yong-Ho Choa, Bongyoung Yoo, Namwoo Kim, 2010 .

Deposition and characterization of silver nanowires embedded PEDOT:PSS thin films via electrohydrodynamic atomization

K. Choi, Navaneethan Duraisamy, Sung‐Jei Hong, 2013 .

Trends of Recycling of Indium-Tin-Oxide (ITO) Target Materials for Transparent Conductive Electrodes (TCEs)

Jae Yong Lee, Sung‐Jei Hong, 2015 .

Microwave annealing of indium tin oxide nanoparticle ink patterned by ink-jet printing.

Jong‐Woong Kim, Sung-Jei Hong, Jang-Woo Choi, 2013, Journal of nanoscience and nanotechnology.

Flexible metal–insulator–metal (MIM) devices for plastic film AM-LCD

Jeong In Han, Min-Gi Kwak, Yong-Hoon Kim, 2002 .

Role of ITO nanoparticles embedded into electrospun ITO nanofibers

Yong‐Young Noh, I. Hwang, Byoungchoo Park, 2017 .

Low-temperature catalyst adding for tin-oxide nanostructure gas sensors

Jeong-In Han, Sung-Jei Hong, J. Han, 2005 .

Control of resistance to enhance the sensitivity of nanocrystalline tin oxide gas sensitive thick film

Jeong-In Han, Dae-Gyu Moon, Sung-Jei Hong, 2004, Proceedings of IEEE Sensors, 2004..

Effect of low temperature composite catalyst loading (LTC2L) on sensing properties of nano gas sensor

Jeong-In Han, Sung-Jei Hong, J. Han, 2004 .

Improvement of Electrical Properties of Tin Oxide Nanoparticle by Controlling its Surface Structure

J. Han, Sung‐Jei Hong, 2004 .

Fabrication of SiC nanoparticles by physical milling for ink-jet printing.

Jong‐Woong Kim, H. Cho, M. Kwak, 2013, Journal of Nanoscience and Nanotechnology.

Recent Advances in Eco-friendly Nano-ink Technology for Display and Semiconductor Application

Nam-Kee Kang, Sung-Jei Hong, Young-Seok Kim, 2010 .

Growth factors for silver nanoplates formed in a simple solvothermal process.

Y. Choa, N. Myung, Q. Lu, 2010, Journal of nanoscience and nanotechnology.

Electrohydrodynamic Spray Deposition of ZnO Nanoparticles

Kyung Hyun Choi, Saleem Khan, Yang Hoi Doh, 2010 .

Solution-processed indium–tin-oxide nanoparticle transparent conductors on flexible glass substrate with high optical transmittance and high thermal stability

J. Han, Sung-Jei Hong, Sunwoo Kim, 2014 .