B. Ramamoorthy

发表

Restoration of blurred images for surface roughness evaluation using machine vision

B. Dhanasekar, B. Ramamoorthy, B. Ramamoorthy, 2010 .

3D tool wear measurement and visualisation using stereo imaging

Santanu Das, B. Ramamoorthy, A. Karthik, 1997 .

Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning

A. S. Varadarajan, B. Ramamoorthy, P. K. Philip, 2002 .

Evaluation of image based Abbott–Firestone curve parameters using machine vision for the characterization of cylinder liner surface topography

Rajalingappaa Shanmugamani, B. Ramamoorthy, K. Deepak Lawrence, 2014 .

Multi-surface topography targeted plateau honing for the processing of cylinder liner surfaces of automotive engines

B. Ramamoorthy, K. Deepak Lawrence, K. D. Lawrence, 2016 .

Machine Vision for Surface Roughness Assessment of Inclined Components

B. Ramamoorthy, P. Priya, 2010 .

Evaluation of Surface Roughness Using a Image Processing and Machine Vision System

B. Dhanasekar, B. Ramamoorthy, B. Ramamoorthy, 2006 .

Role of interacting surfaces in the performance enhancement of interference fits

V. Radhakrishnan, B. Ramamoorthy, P. Venkateswara Rao, 1995 .

Surface roughness evaluation using machine vision approach and Hurst operator

B. Ramamoorthy, J. N.V. Krishna, 2002, Other Conferences.

Unsupervised Shape Classification of Convexly Touching Coated Parts with Different Geometries

Rajalingappaa Shanmugamani, B. Ramamoorthy, M. Ramanathan, 2014 .

A method of estimating the strength of interference fitted assemblies using modelling techniques

B. Ramamoorthy, P. Venkateswara Rao, 1994 .

Application of digital image magnification for surface roughness evaluation using machine vision

Rajneesh Kumar, B. Dhanasekar, B. Ramamoorthy, 2005 .

Detection and classification of surface defects of gun barrels using computer vision and machine learning

Rajalingappaa Shanmugamani, B. Ramamoorthy, Mohammad Sadique, 2015 .

The influence of component inclination on surface finish evaluation using digital image processing

B. Ramamoorthy, P. Priya, 2007 .

Assessment of surface roughness based on super resolution reconstruction algorithm

B. Dhanasekar, B. Ramamoorthy, 2008 .

A study on the surface integrity aspects of superalloy Inconel 718 under minimum quantity lubrication in high speed turning

L. Vijayaraghavan, B. Ramamoorthy, D. G. Thakur, 2011 .

Some Investigations on High Speed Dry Machining of Aerospace Material Inconel 718 Using Multicoated Carbide Inserts

L. Vijayaraghavan, B. Ramamoorthy, B. Ramamoorthy, 2012 .

Numerical generation of anisotropic 3D non-Gaussian engineering surfaces with specified 3D surface roughness parameters

M. Singaperumal, K. K. Manesh, B. Ramamoorthy, 2010 .

Evaluation of surface roughness based on monochromatic speckle correlation using image processing

Basanta Bhaduri, B. Ramamoorthy, N. Krishna Mohan, 2008 .

Digital speckle interferometry for assessment of surface roughness

B. Ramamoorthy, B. Ramamoorthy, B. Dhanasekar, 2008 .

Performance Improvement Of Shrink-Fitted Assemblies by Surface Strengthening

B. Ramamoorthy, V. Radhakrishnan, B. Ramamoorthy, 1992 .

Effect of cutting parameters on the degree of work hardening and tool life during high-speed machining of Inconel 718

L. Vijayaraghavan, B. Ramamoorthy, B. Ramamoorthy, 2012 .

An investigation into the high performance of TiN-coated rollers in burnishing process

B. Ramamoorthy, Binu C. Yeldose, B. Ramamoorthy, 2008 .

Effect of surface lay in the surface roughness evaluation using machine vision

Srinagalakshmi Nammi, B. Ramamoorthy, Srinagalakshmi Nammi, 2014 .

An experimental analysis of effective high speed turning of superalloy Inconel 718

L. Vijayaraghavan, B. Ramamoorthy, B. Ramamoorthy, 2009 .

Investigation and optimization of lubrication parameters in high speed turning of superalloy Inconel 718

L. Vijayaraghavan, B. Ramamoorthy, B. Ramamoorthy, 2010 .

Performance of TiCN and TiAlN tools in machining hardened steel under dry, wet and minimum fluid application

B. Ramamoorthy, B. Ramamoorthy, P. Nair, 2008 .

Optimization of Surface Milling of Hardened AISI4340 Steel with Minimal Fluid Application Using a High Velocity Narrow Pulsing Jet of Cutting Fluid

A. S. Varadarajan, K. Leo Dev Wins, B. Ramamoorthy, 2010 .

Statistical approaches to surface texture classification

B. Ramamoorthy, V. Radhakrishnan, 1993 .

A Study on the Parameters in High-Speed Turning of Superalloy Inconel 718

L. Vijayaraghavan, B. Ramamoorthy, B. Ramamoorthy, 2009 .

Influence of cutting fluid composition and delivery variables on performance in hard turning using minimal fluid in pulsed jet form

A. S. Varadarajan, B. Ramamoorthy, P. K. Philip, 2001 .