Takeo Shinmura

发表

Development of Effective Magnetic Deburring Method for a Drilled Hole on the Inside of Tubing Using a Magnetic Machining Jig

Yan Hua Zou, Takeo Shinmura, 2007 .

Study on Internal Magnetic Field Assisted Finishing Process Using a Magnetic Machining Jig for Thick Non-Ferromagnetic Tube

Yan Hua Zou, Takeo Shinmura, Jiang Nan Liu, 2011 .

Development of Magnetic Field Assisted Machining Process Using Magnetic Machining Jig : Development of a New Magnetic Machining Jig with a Couple of N・S Permanent Magnets

Takeo Shinmura, Yanhua Zou, 2002 .

1409 Development of a New Processing Method Using the Interaction of Current and Magnetic Field : Precise Perforating of Shut Part

Takeo Shinmura, Yanhua Zou, Toshio Aizawa, 2006 .

Study on magnetic-abrasive finishing. Rounding condition and its confirmation by experiment.

Takeo Shinmura, Koya Takazawa, Eiju Hatano, 1986 .

Study on magnetic abrasive finishing: effects of various types of magnetic abrasives on finishing characteristics

Takeo Shinmura, Koya Takazawa, Eiju Hatano, 1987 .

Study on a new internal finishing process of a nonferromagnetic tube by the application of a linearly travelling magnetic field: on the process principle and the behaviors of magnetic finishing tool

Hitomi Yamaguchi, Takeo Shinmura, 1993 .

Development of an Internal Magnetic Abrasive Finishing Process for Nonferromagnetic Complex Shaped Tubes

Hitomi Yamaguchi, Takeo Shinmura, Atsushi Kobayashi, 2001 .

Study on Internal Magnetic Field Assisted Finishing Process Using a Magnetic Machining Jig

Yan Hua Zou, Takeo Shinmura, 2005 .

2620 An Effective Deburring Process for Drill Hole on a Pipe Inside by the Application of Magnetic Field Assisted Machining

Takeo Shinmura, Yanhua Zou, 2005 .

Study on Internal Magnetic Field Assisted Machining Process for Thick Tubing Using Magnetic Machining Jig

Takeo Shinmura, Yanhua Zou, 2004 .

A New Internal Finishing Process by Applying Magnetic Abrasive Finishing through the Use of the Pole Rotation System -Processing Principle with a Few Finishing Characteristics-

Hitomi Yamaguchi, Takeo Shinmura, Takehiro Kaneko, 1995 .

Development of magnetic abrasive finishing apparatus using vibratory magnetic poles and its finishing performance.

Takeo Shinmura, 1988 .

Study on internal finishing of a non-ferromagnetic tubing by magnetic abrasive machining process

Takeo Shinmura, Toshio Aizawa, T. Shinmura, 1988 .

Study on a New Internal Finishing Process by the Application of Magnetic Abrasive Machining : Internal Finishing of Stainless Steel Tube and Clean Gas Bomb

Hitomi Yamaguchi, Takeo Shinmura, 1995 .

21002 Study of a New Precision Deburring of a Drill Processing Hole by the Application of Magnetic Field Assisted Machining

Hitomi Yamaguchi, Takeo Shinmura, Masahiro Sekiguchi, 2005 .

21514 Study of a New Precision Finishing Process for Square Tubes Using Axial Vibration System : The finish of corner surface in the aluminum square tube inside

Hitomi Yamaguchi, Takeo Shinmura, Hideki Fujita, 2007 .

The Development of Magnetic-abrasive Finishing and Its Equipment by Applying a Rotating Magnetic Field

Takeo Shinmura, Koya Takazawa, Eiju Hatano, 1986 .

Uniform Internal Finishing of SUS304 Stainless Steel Bent Tube Using a Magnetic Abrasive Finishing Process

Hitomi Yamaguchi, Takeo Shinmura, Megumi Sekine, 2005 .

Study on magnetic-abrasive finishing. Effects of machining fluid on finishing characteristics

Takeo Shinmura, Koya Takazawa, Eiju Hatano, 1986 .

Development of a new internal finishing process applying magnetic abrasive finishing by use of pole rotation system

Hitomi Yamaguchi, Takeo Shinmura, Takehiro Kaneko, 1996 .

Study on Magnetic Abrasive Finishing

Takeo Shinmura, Koya Takazawa, Eiju Hatano, 1990 .

Study of magnetic field assisted mechanochemical polishing process for inner surface of Si3N4 ceramic components: Finishing characteristics under wet finishing using distilled water

Hitomi Yamaguchi, Takeo Shinmura, Debin Wang, 2004 .

A New Internal Finishing Process of a Non-ferromagnetic Tubing by Applying a Magnetic Field. The Development of a Unit Type Finishing Apparatus using Permanent Magnets.

Hitomi Yamaguchi, Takeo Shinmura, Toshio Aizawa, 1993 .

Study on Magnetic-abrasive Finishing (1st Report)

Takeo Shinmura, Koya Takazawa, Eiju Hatano, 1986 .

Study of Internal Magnetic Field Assisted Finishing for Copper Tubes with MRF (Magneto-Rheological Fluid)-Based Slurry

Hitomi Yamaguchi, Takeo Shinmura, Takashi Sato, 2007 .

Magnetic Finishing Abrasive with Nickel-Plated Active Carbon

Takeo Shinmura, Yanrong Zhang, Sachio Yoshihara, 2005 .

Study on magnetic-abrasive process: process principle and finishing possibility

Takeo Shinmura, Koya Takazawa, Eiju Hatano, 1985 .

Development of a new precision internal machining process using an alternating magnetic field

Hitomi Yamaguchi, Takeo Shinmura, Maki Takenaga, 2003 .

Novel Magnetic Finishing Abrasive with Nickel–Cobalt-Plated Active Carbon and Its Application to Ultraprecision Polishing

Takeo Shinmura, Yanrong Zhang, Sachio Yoshihara, 2006 .

Development of spindle-finish type finishing apparatus and its finishing performance using a magnetic abrasive machining process

Takeo Shinmura, Koya Takazawa, Eiju Hatano, 1987 .

Study on a New Finishing Process of Fine Ceramics by Magnetic Abrasive Machining : On the Improving Effect of Finishing Efficiency Obtained by Mixing Diamond Magnetic Abrasives with Ferromagnetic Particles

Takeo Shinmura, Feng Hui Wang, Toshio Aizawa, 1993 .