Amar M. Kamat

发表

3D-printed bioinspired microsensors for biomedical flow sensing applications

Ajay Giri Prakash Kottapalli, Amar M. Kamat, 2019 .

Fish-inspired flow sensors for biomedical applications

Ajay Giri Prakash Kottapalli, Amar M. Kamat, 2019 .

A Low-Cost Lung Monitoring Point-of-Care Device Based on a Flexible Piezoresistive Flow Sensor

Bayu Jayawardhana, Debarun Sengupta, Amar M. Kamat, 2020, 2020 IEEE Sensors.

Investigation on shape deviation of horizontal interior circular channels fabricated by laser powder bed fusion

Amar M. Kamat, Shaochuan Feng, Shijie Chen, 2020 .

Combustion of an Illinois No. 6 coal char simulated using an atomistic char representation and the ReaxFF reactive force field

Adri C. T. van Duin, Amar M. Kamat, Jonathan P. Mathews, 2012 .

An analytical method to predict and compensate for residual stress-induced deformation in overhanging regions of internal channels fabricated using powder bed fusion

Amar M. Kamat, Yutao Pei, Y. Pei, 2019, Additive Manufacturing.

PDMS Flow Sensors With Graphene Piezoresistors Using 3D-Printing and Soft Lithography

Amar M. Kamat, B. Jayawardhana, A. Kottapalli, 2020, 2020 IEEE Sensors.

Laser-Sustained Plasma (LSP) Nitriding of Titanium: A Review

Amar M. Kamat, A. Segall, J. A. Todd, 2019, Coatings.

Bioinspired PDMS-graphene cantilever flow sensors using 3D printing and replica moulding

Amar M. Kamat, B. Jayawardhana, A. Kottapalli, 2020, Nanotechnology.

Molecular dynamics simulations of laser-induced incandescence of soot using an extended ReaxFF reactive force field.

Amar M. Kamat, A. V. van Duin, A. Yakovlev, 2010, The journal of physical chemistry. A.

Physical Activity Outcome In Early Vs Delayed Elderly Hip Fracture Surgery

Amar M. Kamat, Anto A Gopurathingal, 2022, Journal of Surgery and Research.

Biomimetic Soft Polymer Microstructures and Piezoresistive Graphene MEMS Sensors Using Sacrificial Metal 3D Printing.

Amar M. Kamat, B. Jayawardhana, A. Kottapalli, 2021, ACS applied materials & interfaces.

Optimizing Harbor Seal Whisker Morphology for Developing 3D-Printed Flow Sensor

Amar M. Kamat, A. Kottapalli, X. Zheng, 2021, 2021 21st International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers).

Effect of processing parameters on microstructure during laser-sustained plasma (LSP) nitriding of commercially-pure titanium

Amar M. Kamat, J. A. Todd, S. Copley, 2016 .

Angiosarcoma in Chronic Filarial Lymphedema – A Report of Two Cases

Amar M. Kamat, Suraj Hindiskere, P. Chinder, 2022, Journal of orthopaedic case reports.

A two-step laser-sustained plasma nitriding process for deep-case hardening of commercially pure titanium

Amar M. Kamat, J. A. Todd, S. Copley, 2017 .

Enhancement of CP-titanum wear resistance using a two-step CO2 laser-sustained plasma nitriding process

Amar M. Kamat, A. Segall, J. A. Todd, 2017 .

Effect of CO2 Laser‐Sustained Nitrogen Plasma on Heat and Mass Transfer During Laser‐Nitriding of Commercially‐Pure Titanium

Amar M. Kamat, J. A. Todd, S. Copley, 2016 .

Gradient Embedded Genetic Algorithm (GEGA)

Amar M. Kamat, M. Barbatti, M. Ruckenbauer, 2010 .

Study of effect of water vapor and mechanical strain on thermal conductivity of zinc oxide using the ReaxFF reactive force field

Amar M. Kamat, A. V. Duin, A. Bharathi, 2012 .

Piezoresistive 3D graphene–PDMS spongy pressure sensors for IoT enabled wearables and smart products

Amar M. Kamat, Debarun Sengupta, B. Jayawardhana, 2022, Flexible and Printed Electronics.

Design and fabrication of conformal cooling channels in molds: Review and progress updates

Amar M. Kamat, Shaochuan Feng, Y. Pei, 2021 .

Creating underwater vision through wavy whiskers: a review of the flow-sensing mechanisms and biomimetic potential of seal whiskers

Amar M. Kamat, A. Kottapalli, X. Zheng, 2021, Journal of the Royal Society Interface.

Source-Seeking Control of Unicycle Robots With 3-D-Printed Flexible Piezoresistive Sensors pdf

Bayu Jayawardhana, Ajay Giri Prakash Kottapalli, Amar M. Kamat, 2021, IEEE Transactions on Robotics.

3D Printed Graphene-Coated Flexible Lattice as Piezoresistive Pressure Sensor

Amar M. Kamat, A. Kottapalli, 2021, 2021 21st International Conference on Solid-State Sensors, Actuators and Microsystems (Transducers).

Experimental and numerical investigation of the origin of surface roughness in laser powder bed fused overhang regions

Amar M. Kamat, Shaochuan Feng, Y. Pei, 2021 .

Recurrence of GCTB of Wrist in an Autografted Non-vascularized Fibula: A Case Report

Amar M. Kamat, Suraj Hindiskere, A. Gopurathingal, 2022, Journal of orthopaedic case reports.

Bioinspired Cilia Sensors with Graphene Sensing Elements Fabricated Using 3D Printing and Casting

Amar M. Kamat, Yutao Pei, A. Kottapalli, 2019, Nanomaterials.

University of Groningen Biomimetic Soft Polymer Microstructures and Piezoresistive Graphene MEMS Sensors using Sacrificial Metal 3D Printing Kamat,

Amar M. Kamat, B. Jayawardhana, A. Kottapalli, 2021 .