I. Stone

发表

Nanoquasicrystalline Al–Fe–Cr-based alloys. Part II. Mechanical properties

B. Cantor, M. Galano, F. Audebert, 2009 .

The effect of the spatial distribution of reinforcement on the fabrication and heat treatment of (Al4wt.%Cu)SiC particle metal matrix composites

P. Tsakiropoulos, I. Stone, 1994 .

Manufacture of ceramic fibre metal matrix composites

B. Cantor, F. Dunne, I. Stone, 2003 .

Solution Heat Treatment, Forming and In-Die Quenching of a Commercial Sheet Magnesium Alloy into a Complex-Shaped Component: Experimentation and FE Simulation

J. Dear, S. Das, L. Wang, 2014 .

The Role of Grain Refiner in the Nucleation of AlFeSi Intermetallic Phases During Solidification of a 6xxx Aluminum Alloy

P. Grant, A. Lui, I. Stone, 2019, Metallurgical and Materials Transactions A.

Influence of Grain-Refiner Addition on the Morphology of Fe-Bearing Intermetallics in a Semi-Solid Processed Al-Mg-Si Alloy

K. O’Reilly, I. Stone, Sundaram Kumar, 2013, Metallurgical and Materials Transactions A.

High shear dispersion technology prior to twin roll casting for high performance magnesium/SiC p metal matrix composite strip fabrication

Z. Fan, Xinliang Yang, N. Barekar, 2016 .

Hot Cracking Susceptibility in the TIG Joint of AZ31 Mg-Alloy Plates Produced by the TRC Process with and without Intensive Melt Shearing

Z. Fan, Y. Wang, I. Stone, 2013 .

Nanoquasicrystalline Al–Fe–Cr-based alloys. Part I: Phase transformations

B. Cantor, M. Galano, F. Audebert, 2009 .

The effect of reinforcement on the notched and unnotched room temperature tensile properties of Al-4wt.%Cu/SiCp MMCs

P. Tsakiropoulos, I. Stone, 1998 .

Identification of key liquid metal flow features in the physical conditioning of molten aluminium alloy with high shear processing

M. Tong, Z. Fan, D. Browne, 2017 .

Melt Conditioned Twin Roll Casting (MC-TRC) of Thin Mg-Alloy Strips for Direct Stamping of Mg Components

J. Dear, S. Ji, Jianguo Lin, 2013 .

Refinement of primary Si in hypereutectic Al-Si alloys by intensive melt shearing

Z. Zhang, Z. Fan, I. Stone, 2012 .

Isothermal grain coarsening of spray formed alloys in the semi-solid state

Patrick S. Grant, Julian R. Jones, Brian Cantor, 2002 .

Characterisation of spatial distribution of reinforcement in powder metallurgy route Al/SiCp metal matrix composites

P. Tsakiropoulos, I. Stone, 1995 .

Heterogeneous Nucleation of α-Al Grain on Primary α-AlFeMnSi Intermetallic Investigated Using 3D SEM Ultramicrotomy and HRTEM

Z. Fan, G. Thompson, S. Ji, 2014, Metallurgical and Materials Transactions A.

Structural characterisation and stability of new nanoquasicrystalline Al-based alloys

B. Cantor, M. Galano, F. Audebert, 2004 .

Structural Characterisation and Mechanical Properties of Nanocomposite Al-based Alloys

B. Cantor, F. Prima, M. Galano, 2002 .

In situ resistometric investigation of phase transformations in rapidly solidified Al-based alloys containing dispersed nanoscale particles

B. Cantor, F. Prima, P. Švec, 2004 .

The dependence of ageing on 3-dimensional spatial distribution of reinforcement in Al-4wt%Cu/SiCp MMCs

P. Tsakiropoulos, I. Stone, C. E. Wilson, 1997 .

Microstructural evolution in semi-solid AA7034

B. Cantor, Heesool Kim, I. Stone, 2008 .

Improved techniques for the production of remelt feedstock for Bridgman directional solidification of aluminium alloys

H. Jones, I. Stone, 1998 .

Effect of Nb on nanoquasicrystalline Al-based alloys

B. Cantor, M. Galano, F. Audebert, 2008 .

Effect of Si on the formation and stability of the icosahedral quasicrystalline phase in Al–Fe–Cr–Ti alloys

I. Stone, K. L. Sahoo *, 2005 .

Characterization of spatial distribution of reinforcement in powder metallurgy route Al/SiCp metal matrix composites. II: Techniques based on local energy dispersive X-ray analysis

P. Tsakiropoulos, I. Stone, 1995 .

Metal and ceramic matrix composites

B. Cantor, F. Dunne, I. Stone, 2003 .

Refinement of Primary Silicon Crystals by Novel Al‐ZnS Master Alloy in Solidification of Hypereutectic Al‐Si Alloys

Z. Fan, K. Al-Helal, I. Stone, 2016 .

Simultaneous Primary Si Refinement and Eutectic Modification in Hypereutectic Al–Si Alloys

Z. Fan, K. Al-Helal, I. Stone, 2012, Transactions of the Indian Institute of Metals.

Effect of cooling rate and front velocity on solidification micro structure selection in Al-3.5wt.%Fe-0 to 8.5wt.%Si alloys

H. Jones, I. Stone, 1997 .

Nanoquasicrystalline Al–Fe–Cr-based alloys with high strength at elevated temperature

B. Cantor, M. Galano, F. Audebert, 2010 .

The characterisation of the spatial distribution of reinforcement in powder metallurgy route Al/SiCp MMCs and its effect on their processing and properties

I. Stone, 1994 .

Cooling rates in gas atomised Al-4wt%Cu alloys powders

P. Tsakiropoulos, I. Stone, 1992 .

Novel Multicomponent Alloys

B. Cantor, M. Galano, F. Audebert, 2005 .

Characterisation of an Al93Fe3Cr2Ti2 alloy obtained by spray forming

M. Lieblich, A. García-Escorial, I. Stone, 2010 .

Advanced Casting Technologies Using High Shear Melt Conditioning

Z. Fan, Xinliang Yang, Y. Wang, 2018 .

De-Ironing of Aluminium Alloy Melts by High Shear Melt Conditioning Technology: An Overview

F. Gao, Z. Fan, I. Chang, 2022, Metals.

Solidification processing of scrap Al-alloys containing high levels of Fe

I. Chang, J. Patel, Z. Fan, 2019, IOP Conference Series: Materials Science and Engineering.

The Scale-Up of High Shear Processing for the Purification of Recycled Molten Scrap Aluminium Alloy: Key Features of Fluid Flow

M. Tong, Z. Fan, D. Browne, 2017 .

Computational prediction of the refinement of oxide agglomerates in a physical conditioning process for molten aluminium alloy

M. Tong, D. Browne, J. Patel, 2015 .

Structural Characterisation and Mechanical Properties of Nanocomposite Al-based Alloys

B. Cantor, F. Prima, M. Galano, 2002 .