Isami Nitta

发表

2705 Development of 3D Precision Laser Processing Equipment with Wide Processing Area

Ryousuke Haga, Isami Nitta, Satosi Nonaka, 2005 .

2310 Development of Laser Coordinate Measuring Machine for Passenger Trains

Isami Nitta, Akihiro Kanno, Ryosuke Suzuki, 2012 .

0618 Improvement of Laser Coordinate Measuring Machine for Railway Trains

Isami Nitta, Akihiro Kanno, Ryosuke Suzuki, 2012 .

Proposal of Design Guidelines on a Novel Polyaxial Locking Mechanism of Self-tapping for Osteosynthesis Plate

Isami Nitta, Yosuke Tsukiyama, Hiroya Toyosaki, 2018 .

2305 High frictional surface for improving initial fixation of spinal instrumentation

Isami Nitta, Yosuke Tsukiyama, Kazunari Nakamata, 2014 .

Proposal of New Polyaxial Locking Mechanism Using the Self-tapping in the Osteosynthesis Plate

Isami Nitta, Yosuke Tsukiyama, Hiroya Toyosaki, 2017 .

608 Development of Laser Fine Processing Equipment with Wide Processing Area using Shrink Fitter Technology

Ryousuke Haga, Isami Nitta, 2007 .

2918 Development of Wide-View 3D Laser Imager Using the Shrink Fitter : Improvement of Image Jitter

Isami Nitta, Akihiro Kanno, Yasushi Nagaoka, 2005 .

Observation of Spherical Heart-Valve Prosthesis using a Laser Microscope with Wide Field of View

Isami Nitta, Takuya Watanabe, Yosuke Tsukiyama, 2013 .

Detection of Leak of Hollow Optical Fiber Using Acoustics(Experiments and Theoretical Analysis)

Seiji Watanabe, Isami Nitta, Kensaku Yanagimoto, 2011 .

707 The basic research of contact mechanisms for thermal print head of dye-sublimation printer

Isami Nitta, Munetoshi Ikegami, Hirotoshi Terao, 2005 .

Data Stitching Techniques for Railway Vehicles measured with Laser Coordinate Measuring Machine

Isami Nitta, Akihiro Kanno, Yosuke Tsukiyama, 2014 .

106 シュリンクフィッタを用いた広視野 3D レーザスキャナーの基礎研究

Isami Nitta, Akihiro Kanno, Michiya Okamoto, 2003 .

Development of the Laser Fine Processing Equipment with Wide Process Area Using a Shrink Fitter Technology

Ryousuke Haga, Isami Nitta, Akihiro Kanno, 2007 .

Evaluation of Clamping Forces and Friction Coefficients of Aneurysm Clips Finished by Laser Processing(Machine Elements, Design and Manufacturing)

Isami Nitta, Satoshi Nomura, Noboru Takatsu, 2010 .

Laser treatment of cutaneous lesions with image-guided fine spot-scanning irradiation

Isami Nitta, Xuefeng Zhao, Akihiro Kanno, 2007, SPIE/COS Photonics Asia.

Study of the fitting strength between ceramic and metal elements with the use of a shrink fitter at elevated temperature. Proposal of the shrink-fit method with the use of a shrink fitter and experimental results.

Isami Nitta, Koji Kato, Kenji Kigoshi, 1989 .

1507 Research of 3D Precision Laser Processing Equipment with Wide Processing Area

Ryousuke Haga, Isami Nitta, Satosi Nonaka, 2006 .

Fundamental study of acoustic leakage through a gap between gasket and flange surface

Isami Nitta, Shuichi Sakamoto, Yosuke Tsukiyama, 2016 .

502 Development of 3D Laser Imager with a Huge Field of View and High Resolution

Isami Nitta, Akihiro Kanno, Yasushi Nagaoka, 2006 .

Developement of a Three Dimensional Laser Scanner : Examination of Basic Performance

Isami Nitta, Akihiro Kanno, Michiya Okamoto, 2004 .

S1110604 Elucidation procedure of frictional property between rubber and flooring for the purpose of the prevention of slipping on the floor

Isami Nitta, Yosuke Tsukiyama, Takuto Masuda, 2015 .

Proposal of new fastening mechanism of osteosynthesis plate

Isami Nitta, Yosuke Tsukiyama, Hiroya Toyosaki, 2016 .

Proposal of lightweight and low starting torque slide bearing with looped carbon fibers brush

Isami Nitta, Yosuke Tsukiyama, Noritsugu Umehara, 2017 .

607 Measurement of Passenger Trains with Newly Developed Laser Coordinate Measuring Machine

Isami Nitta, Akihiro Kanno, Yosuke Tsukiyama, 2012 .

Analysis of contact pressure acting on a thermal print head of a thermal transfer printer and it's experimental examination

Isami Nitta, Hirotoshi Terao, Takuya Seshita, 2003 .

1107 Evaluation of the Performance of Static Seals Using a Laser Microscope With a Wide Field of View

Isami Nitta, Shuichi Sakamoto, Yosuke Tsukiyama, 2014 .

118 ポリゴンミラー反射面形状がスキャナモータのジッタに及ぼす影響(O.S.1-3 接触問題とその応用)(オーガナイズドセッション1 : 新世紀に向けたトライボロジーと機械要素およびその応用技術)

Isami Nitta, Akihiro Kanno, Kimio Komata, 2001 .

Ultrahigh-speed optical links and signal processing using ultrafast semiconductor diode lasers

Isami Nitta, Peter J. Delfyett, Brian Mathason, 1999, Photonics West.

3054 Estimation of friction characteristics of aneurysm clips

Isami Nitta, Xuefeng Zhao, Satoshi Nomura, 2007 .

The Effect of Surface Roughness on Fitting Strength of Shrink Fit Between Ceramic and Metal Elements

Isami Nitta, S. Shimoda, Koji Kato, 1989 .

Experimental Study of the Performance of Static Seals Based on Measurements of Real Contact Area Using Thin Polycarbonate Films

Isami Nitta, Yoshio Matsuzaki, 2010 .

Development of Laser Therapy Apparatus using Minute Spot Scanning Method

Isami Nitta, Akihiro Kanno, Yoshitaka Maeda, 2006 .

Evaluation of sealing characteristics of copper gasket using laser microscope with wide field of view

Isami Nitta, Shuichi Sakamoto, Yosuke Tsukiyama, 2014 .

Measurements of real contact areas using PET films (thickness, 0.9 μm)

Isami Nitta, 1995 .

Thorough Observation of Real Contact Area of Copper Gaskets Using a Laser Microscope With a Wide Field of View

Isami Nitta, Shuichi Sakamoto, Yosuke Tsukiyama, 2013 .

Frictional characteristics of clamp surfaces of aneurysm clips finished by laser processing

Isami Nitta, Yosuke Tsukiyama, Satoshi Nomura, 2016 .

Measurements of distributions of contact pressures between ground surfaces using PET films

Isami Nitta, Takeshi Jozawa, 1996 .

The development of a Vickers-type hardness tester for cryogenic temperatures down to 4.2 K

Isami Nitta, Akira Iwabuchi, Tomoharu Shimizu, 1996 .

Effect of Interference on Scanning Performance of fθ Lens Fixed by a Shrink Fitter

Isami Nitta, Akihiro Kanno, Kimio Komata, 2003 .