Ian G. Foulds

发表

An Improved Electrolytic Pump for Potential Drug Delivery Applications

Ying Yi, Ulrich Buttner, Armando Arpys Arevalo Carreno, 2014, BIODEVICES.

Simulation of a Low Frequency Z-Axis SU-8 Accelerometer in CoventorWare and MEMS+

Jürgen Kosel, David Conchouso, Armando Arpys Arevalo Carreno, 2013, 2013 UKSim 15th International Conference on Computer Modelling and Simulation.

Torsion Based Universal MEMS Logic Device

Mohammad I. Younis, Arpys Arevalo, Ian G. Foulds, 2015 .

Low-cost silicon wafer dicing using a craft cutter

Arpys Arevalo, Ian G. Foulds, Yiqiang Fan, 2015 .

Laser micromachined wax-covered plastic paper as both sputter deposition shadow masks and deep-ultraviolet patterning masks for polymethylmethacrylate-based microfluidic systems

Ying Yi, Ian G. Foulds, Yiqiang Fan, 2013 .

Automated assembly of hingeless 90° out-of-plane microstructures

M. Parameswaran, Ian G. Foulds, Dan Sameoto, 2007 .

On-Chip Magnetic Bead Manipulation and Detection Using a Magnetoresistive Sensor-Based Micro-Chip: Design Considerations and Experimental Characterization

Chinthaka P. Gooneratne, Jürgen Kosel, Fuquan Li, 2016, Sensors.

Out-of-plane platforms with bi-directional thermal bimorph actuation for transducer applications

David Conchouso, Arpys Arevalo, Ian G. Foulds, 2015, 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Characterization of Kink Actuators as Compared to Traditional Chevron Shaped Bent-Beam Electrothermal Actuators

Ian G. Foulds, Ayman M. Karam, Ehab Rawashdeh, 2012, Micromachines.

Hysteresis spring single digital input bistable mechanism

Ian G. Foulds, M. Parameswaran, 2005, 2005 International Conference on MEMS,NANO and Smart Systems.

3-Coil resonance-based wireless power transfer system for implantable electronic

Ulrich Buttner, Ying Yi, Ian G. Foulds, 2013, 2013 IEEE Wireless Power Transfer (WPT).

Simulation and fabrication of integrated polystyrene microlens in microfluidic system

David Conchouso, Ian G. Foulds, Yiqiang Fan, 2013, Microtechnologies for the New Millennium.

A versatile multi-user polyimide surface micromachinning process for MEMS applications

David Conchouso, Arpys Arevalo, Ian G. Foulds, 2015, 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Electromagnetically powered electrolytic pump and thermo-responsive valve for drug delivery

Ying Yi, Jürgen Kosel, Ulrich Buttner, 2015, 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Fabrication of SU-8 low frequency electrostatic energy harvester

Ian G. Foulds, Khaled Ramadan, 2011, 2011 International Conference on Energy Aware Computing.

Simulation of SU-8 Frequency-Driven Scratch Drive Actuators

Jürgen Kosel, David Conchouso, Arpys Arevalo, 2013, 2013 UKSim 15th International Conference on Computer Modelling and Simulation.

A surface micromachined bistable switch

Ian G. Foulds, R. W. Johnstone, N. Trinh, 2002, IEEE CCECE2002. Canadian Conference on Electrical and Computer Engineering. Conference Proceedings (Cat. No.02CH37373).

Integrated lenses in polystyrene microfluidic devices

Huawei Li, Ian G. Foulds, Yiqiang Fan, 2013, The 8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Low-cost rapid prototyping of flexible plastic paper based microfluidic devices

Huawei Li, Ying Yi, Ian G. Foulds, 2013, The 8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Platform Isolation Using Out-of-Plane Complaint Mechanisms

David Conchouso, Arpys Arevalo, Ian G. Foulds, 2014 .

Design and optimization of a 3‐coil resonance‐based wireless power transfer system for biomedical implants

Ying Yi, Ulrich Buttner, Ian G. Foulds, 2015, Int. J. Circuit Theory Appl..

Fabrication of an inexpensive cleanroom module for microsystem testing

M. Parameswaran, Ian G. Foulds, Dan Sameoto, 2007 .

Towards a digital sound reconstruction MEMS device: Characterization of a single PZT based piezoelectric actuator

Mohammad I. Younis, David Conchouso, Arpys Arevalo, 2015, 10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Surface tension-induced high aspect-ratio PDMS micropillars with concave and convex lens tips

Huawei Li, Ying Yi, Ian G. Foulds, 2013, The 8th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems.

Characteristics of Bow-Tie Antenna Structures for Semi-Insulating GaAs and InP Photoconductive Terahertz Emitters

Jonathan F. Holzman, Ian G. Foulds, Salman Alfihed, 2021, Sensors.

A pulsed mode electrolytic drug delivery device

David Conchouso, Ulrich Buttner, Armando Arpys Arevalo Carreno, 2015 .

TOWARDS AN IMPLANTABLE PULSED MODE ELECTROLYTIC DRUG DELIVERY SYSTEM

Saudi Arabia, Ulrich Buttner, Ian G. Foulds, 2013 .

New design for surface micromachined bistable and multistable switches

Ian G. Foulds, R. W. Johnstone, Maria Trinh, 2003 .

PMMA to Polystyrene bonding for polymer based microfluidic systems

Ian G. Foulds, Yiqiang Fan, Ying Yi, 2014 .

Design and characterization of ultra-stretchable monolithic silicon fabric

Muhammad Mustafa Hussain, Arpys Arevalo, Jhonathan P. Rojas, 2014 .

Fabrication of high performance GaN modulation doped field effect transistors

Ian G. Foulds, B. Lamontagne, Haipeng Tang, 2000 .

Development of an SU-8 MEMS process with two metal electrodes using amorphous silicon as a sacrificial material

Ian G. Foulds, Khaled Ramadan, I. Foulds, 2013 .

UHeater on a Buckled Cantilever Plate for Gas Sensor Applications

Armando Arpys Arevalo Carreno, Ian G. Foulds, Ernesto Byas, 2012 .

Stretchable Helical Architecture Inorganic-Organic Hetero Thermoelectric Generator

Muhammad Mustafa Hussain, David Conchouso, Arpys Arevalo, 2016 .

Radio frequency feedback method for parallelized droplet microfluidics

David Conchouso, Garret McKerricher, Arpys Arevalo, 2016, 2016 IEEE 11th Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS).

Paper-based origami flexible and foldable thermoelectric nanogenerator

Muhammad Mustafa Hussain, David Conchouso, Arpys Arevalo, 2017 .

Simulation of a Micro-Scale Out-of-plane Compliant Mechanism

Nikolai Dechev, Arpys Arevalo, Ian G. Foulds, 2014 .

Magneto-mechanical trapping systems for biological target detection

Chinthaka P. Gooneratne, Jurgen Kosel, Rimantas Kodzius, 2014, Microchimica Acta.

Inhibitory effect of common microfluidic materials on PCR outcome

Xiuqing Gong, Weijia Wen, Rimantas Kodzius, 2012 .

A planar self-sacrificial multilayer SU-8-based MEMS process utilizing a UV-blocking layer for the creation of freely moving parts

M. Parameswaran, Ian G. Foulds, M. Parameswaran, 2006 .

Three-Axis Magnetic Field Induction Sensor Realized on Buckled Cantilever Plate

Jurgen Kosel, Ian G. Foulds, Ahmed Alfadhel, 2013, IEEE Transactions on Magnetics.

New Movable Plate for Efficient Millimeter Wave Vertical on-Chip Antenna

Atif Shamim, Loic Marnat, Ian G. Foulds, 2013, IEEE Transactions on Antennas and Propagation.

Printed wax masks for 254 nm deep-UV pattering of PMMA-based microfluidics

Yang Liu, Ian G. Foulds, Yiqiang Fan, 2012 .

Out-of-plane buckled cantilever microstructures with adjustable angular positions using thermal bimorph actuation for transducer applications

David Conchouso, Arpys Arevalo, Ian G. Foulds, 2015 .

Control of the out-of-plane curvature in SU-8 compliant microstructures by exposure dose and baking times

M. Parameswaran, Ian G. Foulds, Dan Sameoto, 2007 .

Piezoelectric transducer array microspeaker

Jürgen Kosel, David Conchouso, Arpys Arevalo, 2016, 2016 IEEE 11th Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS).