Min-Chul Kim

发表

Effects of the Alloy Design and Fabrication Process on Mechanical Properties of Mo + V-Added SA508 Gr.1A Steel for Main Steam Line Piping in Nuclear Power Plants

Jongmin Kim, Maan-Won Kim, Semi Hyun, 2022, Metals and Materials International.

Influence of the thermodynamic parameters on the temper embrittlement of SA508 Gr.4N Ni–Cr–Mo low alloy steel with variation of Ni, Cr and Mn contents

Bongsang Lee, Ki-Hyoung Lee, Min-Chul Kim, 2012 .

Experimental and numerical investigations on brittle failure probability and ductile resistance property

Jaeboong Choi, Yoon-Suk Chang, Y. J. Kim, 2008 .

ESTIMATION OF DUCTILE FRACTURE BEHAVIOR INCORPORATING MATERIAL ANISOTROPY

Yoon-Suk Chang, Min-Chul Kim, Bong-Sang Lee, 2012 .

Effects of microstructural variation on Charpy impact properties in heavy-section Mn-Mo-Ni low alloy steel for reactor pressure vessel

Seokmin Hong, Bongsang Lee, Jaehoon Song, 2016, Metals and Materials International.

Characterization of transition behavior in SA508 Gr.4N Ni–Cr–Mo low alloy steels with microstructural alteration by Ni and Cr contents

D. Wee, Bongsang Lee, Ki-Hyoung Lee, 2011 .

Effects of Al, Mn and Si Contents on Spatter, Fume, Microstructure and Mechanical Property with 490MPa Grade Flux Core Wire

B. Lee, C. Kang, J. Kong, 2010 .

Characterization of boundaries and determination of effective grain size in Mn-Mo-Ni low alloy steel from the view of misorientation

Y. Oh, Jun-Hwa Hong, Min-Chul Kim, 2000 .

Effect of Mo and V Addition on Microstructure and Mechanical Properties of SA508 Gr.1A Steel for Pipeline in Nuclear Power Plants

Seokmin Hong, Jongmin Kim, Semi Hyun, 2022, Metallurgical and Materials Transactions A.

Comparison of fracture properties in SA508 Gr.3 and Gr.4N high strength low alloy steels for advanced pressure vessel materials

Bong-Sang Lee, Sang-Gyu Park, Min-Chul Kim, 2015 .

Effects of the Alloy Design and Fabrication Process on Mechanical Properties of Mo + V-Added SA508 Gr.1A Steel for Main Steam Line Piping in Nuclear Power Plants

Jongmin Kim, Maan-Won Kim, Semi Hyun, 2022, Metals and Materials International.

Effect of Intercritical Heat Treatment on J-R Fracture Resistance of SA508 Gr.1A Low-Alloy Steels

Seokmin Hong, S. Sohn, Jongmin Kim, 2022, Metals and Materials International.

Effect of cooling rate on mechanical properties of SA508 Gr.1A steels for main steam line piping in nuclear power plants

Seokmin Hong, H. Kim, Jongmin Kim, 2021 .

Effects of boundary characteristics on resistance to temper embrittlement and segregation behavior of Ni–Cr–Mo low alloy steel

Bongsang Lee, Ki-Hyoung Lee, Min-Chul Kim, 2013 .

Evaluation of microstructural parameters controlling cleavage fracture toughness in Mn–Mo–Ni low alloy steels

Bong-Sang Lee, Min-Chul Kim, Ki-Hyoung Lee, 2013 .

Machine learning modeling of irradiation embrittlement in low alloy steel of nuclear power plants

Gyeong-Geun Lee, Min-Chul Kim, Bong-Sang Lee, 2021, Nuclear Engineering and Technology.

Evaluation of LBB characteristics of candidate materials for main steam line piping in Korea nuclear power plants

Seokmin Hong, H. Kim, Bongsang Lee, 2020 .

1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion

Young-kyun Kim, Kee‐Ahn Lee, Min-chul Kim, 2022 .

EFFECTS OF TEMPERING AND PWHT ON MICROSTRUCTURES AND MECHANICAL PROPERTIES OF SA508 GR.4N STEEL

M. Jhung, Bongsang Lee, Ki-Hyoung Lee, 2014 .

Cleavage fracture toughness of tempered martensitic Ni–Cr–Mo low alloy steel with different martensite fraction

Bongsang Lee, Ki-Hyoung Lee, Min-Chul Kim, 2012 .

Master curve characterization of the fracture toughness behavior in SA508 Gr.4N low alloy steels

D. Wee, Bongsang Lee, Ki-Hyoung Lee, 2010 .

Characterization of phase fractions and misorientations on tempered Bainitic/Martensitic Ni-Cr-Mo low alloy RPV steel with various Ni content

Bongsang Lee, Ki-Hyoung Lee, Min-Chul Kim, 2013, Metals and Materials International.

Creep strain modeling for alloy 690 SG tube material based on modified theta projection method

Bongsang Lee, Jongmin Kim, Kwon-Jae Choi, 2021, Nuclear Engineering and Technology.

Modified θ projection model-based constant-stress creep curve for alloy 690 steam generator tube material

Min-chul Kim, Bongsang Lee, Jongmin Kim, 2021, Nuclear Engineering and Technology.

A practical power law creep modeling of alloy 690 SG tube materials

Min-chul Kim, Bongsang Lee, Jong Min Kim, 2021 .

Evaluation of Fracture Toughness of a SA580 Gr. 3 Reactor Pressure Vessel Using a Bimodal Master Curve Approach

Seokmin Hong, Min-chul Kim, Bongsang Lee, 2019, Journal of Pressure Vessel Technology.

Evaluation of ductile–brittle transition temperature before and after neutron irradiation for RPV steels using small punch tests

Min-Chul Kim, Y. Oh, Yong Jun Oh, 2005 .

Correlation of the thermodynamic calculation and the experimental observation of Ni-Mo-Cr low alloy steel changing Ni, Mo, and Cr contents

D. Wee, Bongsang Lee, Min-Chul Kim, 2010 .

Characterization of high strength and high toughness Ni―Mo―Cr low alloy steels for nuclear application

J. Yoon, Jun-Hwa Hong, Min-chul Kim, 2010 .

Estimation of Brittle Fracture Behavior of SA508 Carbon Steel by Considering Temperature Dependence of Damage Model

Jaeboong Choi, Yoon-Suk Chang, Shin-Beom Choi, 2012 .

Analysis of the master curve approach on the fracture toughness properties of SA508 Gr.4N Ni–Mo–Cr low alloy steels for reactor pressure vessels

D. Wee, Bongsang Lee, Ki-Hyoung Lee, 2010 .

Microstructural changes by controlling austenitizing and tempering conditions on the J-R fracture resistance of SA508 Gr. 1A low alloy steels

S. Sohn, Jongmin Kim, Sun-Ig Hong, 2021 .

Atom probe tomography analysis of nanostructure evolution in Ni-Cr-Mo low alloy steel under neutron irradiation

Gyeong-Geun Lee, Hyung-Ha Jin, Kunok Chang, 2017 .

Atom probe tomography analysis of nanostructure evolution in Ni-Cr-Mo low alloy steel under neutron irradiation

Kunok Chang, Bongsang Lee, Hyung-Ha Jin, 2017, Journal of Mechanical Science and Technology.

Microstructural characterization of clad interface in welds of Ni-Cr-Mo high strength low alloy steel

Ki-Hyoung Lee, Min-Chul Kim, Chang Hee Lee, 2011 .

Comparison of Microstructure & Mechanical Properties between Mn-Mo-Ni and Ni-Mo-Cr Low Alloy Steels for Reactor Pressure Vessels

Bongsang Lee, Min-Chul Kim, S. Park, 2010 .

Thermodynamic Calculation and Observation of Microstructural Change in Ni-Mo-Cr High Strength Low Alloy RPV Steels with Alloying Elements

D. Wee, Bongsang Lee, Min-Chul Kim, 2008 .

Relationship between crystallographic orientation at the boundaries and brittle crack propagation in Mn-Mo-Ni low alloy steel

Y. Oh, Jun-Hwa Hong, Min-Chul Kim, 2001 .

Weibull Statistics as a Basis for Assessment of Ductile-Brittle Transition Behavior

Min Chul Kim, Jaeboong Choi, Yoon-Suk Chang, 2006 .

Evaluation of Transition Temperature in Reactor Pressure Vessel Steels 6using the Fracture Energy Transition Curve from a Small Punch Test

Seokmin Hong, Taekyung Lee, Jongmin Kim, 2020 .