Gianni Campatelli

发表

Implementing electric mobility new business model in future scenario: the electric park and ride system

Gianni Campatelli, Andrea Meneghin, Filippo Benesperi, 2014, 2014 IEEE International Electric Vehicle Conference (IEVC).

Chatter stability prediction for high-speed milling through a novel experimental-analytical approach

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2017 .

Reliability Improvement of a Diesel Engine Using the FMETA Approach

Gianni Campatelli, G. Arcidiacono, 2004 .

Participative Knowledge Management to Empower Manufacturing Workers

Alexander Richter, Gianni Campatelli, Alexander Stocker, 2016, Int. J. Knowl. Manag..

Workpiece orientation and tooling selection to reduce the environmental impact of milling operations

Gianni Campatelli, Antonio Scippa, Lorenzo Lorenzini, 2014 .

A heuristic approach to meet geometric tolerance in High Pressure Die Casting

Gianni Campatelli, Antonio Scippa, G. Campatelli, 2012, Simul. Model. Pract. Theory.

On the generation of chatter marks in peripheral milling: A spectral interpretation

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2018, International Journal of Machine Tools and Manufacture.

Improved experimental-analytical approach to compute speed-varying tool-tip FRF

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2017 .

Optimization of process parameters using a Response Surface Method for minimizing power consumption in the milling of carbon steel

Gianni Campatelli, Antonio Scippa, Lorenzo Lorenzini, 2014 .

Integrated WAAM-Subtractive Versus Pure Subtractive Manufacturing Approaches: An Energy Efficiency Comparison

Giuseppe Ingarao, Gianni Campatelli, Filippo Montevecchi, 2020, International Journal of Precision Engineering and Manufacturing-Green Technology.

Identification of machine tool dynamics under operational conditions

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2016 .

Design of An Active Workpiece Holder

Gianni Campatelli, Lorenzo Sallese, Antonio Scippa, 2015 .

Investigation on Optimal Mobility System using Axiomatic Design and Scoring Matrix: the “Drive Ability” Experiment☆

Gianni Campatelli, Riccardo Barbieri, G. Campatelli, 2015 .

Influence of Motion Error of Translational and Rotary Axes onto Machined Surface Generated by Simultaneous Five-axis Motion☆

Ryuta Sato, Keiichi Shirase, Gianni Campatelli, 2014 .

Case Study 1.3: Auto-adaptive Vibrations and Instabilities Suppression in General Milling Operations

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2018 .

Analytical - FE simulation of a multi-jet electrospinning process to predict material flow

Gianni Campatelli, Antonio Scippa, Leonardo Sapuppo, 2015, Simul. Model. Pract. Theory.

Experimental stability lobes identification method based on time-frequency domain analysis

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2015 .

Solutions and Business Models for Wireless Charging of Electric Vehicles

Gianni Campatelli, Riccardo Barbieri, Axel Barkow, 2015 .

Introducing wireless charging facilities for electric vehicles: the case study of Firenze

Gianni Campatelli, Andrea Meneghin, Filippo Benesperi, 2014, 2014 IEEE International Electric Vehicle Conference (IEVC).

Development of a simplified approach based on the EFQM model and Six Sigma for the implementation of TQM principles in a university administration

Gianni Campatelli, Andrea Meneghin, Paolo Citti, 2011 .

Quality Inspection of Microtopographic Surface Features with Profilometers and Microscopes

Gianni Campatelli, Nicola Senin, N. Senin, 2011 .

Axiomatic Design for reliability: FMETA approach

Gianni Campatelli, Gabriele Arcidiacono, 2004 .

AXIOMATIC DESIGN FOR SIX SIGMA

Gianni Campatelli, Paolo Citti, Gabriele Arcidiacono, 2002 .

Optimal workpiece orientation to reduce the energy consumption of a milling process

Ryuta Sato, Gianni Campatelli, Antonio Scippa, 2015 .

Mitigation of chatter instabilities in milling using an active fixture with a novel control strategy

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2017 .

Electric and diesel microbuses driving cycles in Firenze city center

Marco Pierini, Gianni Campatelli, Riccardo Barbieri, 2016, 2016 IEEE 16th International Conference on Environment and Electrical Engineering (EEEIC).

3D Finite Element Modeling of Holder-Tool Assembly for Stability Prediction in Milling☆

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2015 .

New business models for electric mobility A possible future scenario

Gianni Campatelli, Andrea Meneghin, Filippo Benesperi, 2014 .

Acoustic compensation for chatter detection

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2015 .

A novel experimental-numerical approach to modeling machine tool dynamics for chatter stability prediction

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2016 .

Geometric Tolerance Evaluation Using Combined Vision – Contact Techniques and Other Data Fusion Approaches

Gianni Campatelli, 2011 .

Two-points-based receptance coupling method for tool-tip dynamics prediction

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2017 .

Environmental Impact Reduction for a Turning Process: Comparative Analysis of Lubrication and Cutting Inserts Substitution Strategies

Gianni Campatelli, Antonio Scippa, G. Campatelli, 2016 .

Numerical investigation of chatter suppression in milling using active fixtures in open-loop control

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2018 .

Sensors compensation for data acquisition in milling applications

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2015 .

Finite Element Modelling of Wire-arc-additive-manufacturing Process

Gianni Campatelli, Filippo Montevecchi, Antonio Scippa, 2016 .

Intelligent Fixtures for Active Chatter Control in Milling

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2016 .

Chatter marks generation mechanisms in peripheral milling

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2017 .

New business models for electric mobility

Gianni Campatelli, Andrea Meneghin, Filippo Benesperi, 2014, 2014 IEEE International Electric Vehicle Conference (IEVC).

Investigating Actuation Strategies in Active Fixtures for Chatter Suppression

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2016 .

Speed-varying Machine Tool Dynamics Identification Through Chatter Detection and Receptance Coupling

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2016 .

Speed-varying cutting force coefficient identification in milling

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2015 .

DEVELOPMENT OF CHATTER INDICES BASED ON MA- CHINING SOUND ANALYSIS

Gianni Campatelli, Antonio Scippa, Francesco Rafanelli, 2015 .

Improved dynamic compensation for accurate cutting force measurements in milling applications

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2015 .

A Dedicated Design Strategy for Active Boring Bar

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2019 .

La metodologia Sei Sigma nei servizi

Cristiano Ciappei, Gianni Campatelli, Paolo Citti, 2006 .

SYSTEMATIC APPROACH TO PRODUCT DESIGN USING AXIOMATIC DESIGN: APPLICATION TO A DIESEL LOCOMOTIVE

Gianni Campatelli, Paolo Citti, Gabriele Arcidiacono, 2003 .

Finished Surface Simulation Method to Predicting the Effects of Machine Tool Motion Errors

Ryuta Sato, Keiichi Shirase, Yuki Sato, 2014, Int. J. Autom. Technol..

FEM based cutting velocity selection for thin walled part machining

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2014 .

Spindle speed ramp-up test: A novel experimental approach for chatter stability detection

Ryuta Sato, Gianni Campatelli, Niccolò Grossi, 2015 .

0605 Time domain simulation model for active fixturing in milling

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2015 .

Milled Surface Generation Model for Chip Thickness Detection in Peripheral Milling

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2013 .

Effects of cutting conditions on forces and force coefficients in plunge milling operations

Gianni Campatelli, Antonio Scippa, Francesco Rafanelli, 2015 .

Chatter Stability Prediction in Milling Using Speed-varying Cutting Force Coefficients☆

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2014 .

A modelling framework for comparing the environmental and economic performance of WAAM-based integrated manufacturing and machining

Luca Settineri, Gianni Campatelli, Filippo Montevecchi, 2019, CIRP Annals.

Development of an artificial vision system for the automatic evaluation of the cutting angles of worn tools

Gianni Campatelli, Antonio Scippa, G. Campatelli, 2016 .

Investigation and Correction of Actual Microphone Response for Chatter Detection in Milling Operations

Gianni Campatelli, Niccolò Grossi, Lorenzo Sallese, 2017 .

Correction to: Chatter stability prediction for high-speedmilling through a novel experimental-analytical approach

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2018 .

Optimization of WAAM Deposition Patterns for T-crossing Features

Gianni Campatelli, Filippo Montevecchi, Antonio Scippa, 2016 .

Improved RCSA technique for efficient tool-tip dynamics prediction

Gianni Campatelli, Niccolò Grossi, Filippo Montevecchi, 2016 .

Prediction of milling cutting force coefficients for Aluminum 6082- T4

Gianni Campatelli, Antonio Scippa, G. Campatelli, 2012 .

Cutting Forces Analysis in Additive Manufactured AISI H13 Alloy

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2016 .

Finite Element mesh coarsening for effective distortion prediction in Wire Arc Additive Manufacturing

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2017 .

Selection of Optimal Process Parameters for Wire Arc Additive Manufacturing

Antonino Squillace, Gianni Campatelli, Antonio Scippa, 2017 .

ADAPTIVE TOOLPATH FOR 3-AXIS MILLING OF THIN WALLED PARTS

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2019, MM Science Journal.

Heat accumulation prevention in Wire-Arc-Additive-Manufacturing using air jet impingement

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2018, Manufacturing Letters.

Idle time selection for wire-arc additive manufacturing: A finite element-based technique

Gianni Campatelli, Niccolò Grossi, Antonio Scippa, 2018 .