J. Lu

发表

Effects of laser shock peening with different coverage layers on fatigue behaviour and fractural morphology of Fe-Cr alloy in NaCl solution

K. Luo, Yongfeng Lu, Yu Yin, 2019, Journal of Alloys and Compounds.

Microstructure and corrosion behavior of the AISI 304 stainless steel after Nd:YAG pulsed laser surface melting

C. Cui, Ying Wang, Ji-fan Hu, 2011 .

Tensile properties and surface nanocrystallization analyses of H62 brass subjected to room-temperature and warm laser shock peening

K. Luo, L. Wu, H. Duan, 2017 .

Investigation and microstructural analyses of massive LSP impacts with coverage area on crack initiation location and tensile properties of AM50 magnesium alloy

K. Luo, C. Cui, J. Z. Lu, 2016 .

Effects of laser peening on stress corrosion cracking (SCC) of ANSI 304 austenitic stainless steel

Lai‐Chang Zhang, K. Luo, J. Z. Lu, 2012 .

Effects of scanning path and overlapping rate on residual stress of 316L stainless steel blade subjected to massive laser shock peening treatment with square spots

Guidong Xu, K. Luo, J. Z. Lu, 2019, Applied Surface Science.

Corrosion behaviour of AISI 304 stainless steel subjected to massive laser shock peening impacts with different pulse energies

K. Luo, J. Z. Lu, M. Luo, 2014 .

Effects of laser shock peening and groove spacing on the wear behavior of non-smooth surface fabricated by laser surface texturing

K. Luo, X. Hua, Shuquan Huang, 2014 .

Effects of multiple laser shock processing (LSP) impacts on mechanical properties and wear behaviors of AISI 8620 steel

Lai‐Chang Zhang, K. Luo, J. Z. Lu, 2012 .

Effects of different shocked paths on fatigue property of 7050-T7451 aluminum alloy during two-sided laser shock processing

K. Luo, C. Cui, D. Kong, 2011 .

Improvement of fatigue life of Ti–6Al–4V alloy by laser shock peening

Fu-Zhen Xuan, Zhendi Wang, Jinzhong Lu, 2010 .

Surface EBSD analysis and strengthening mechanism of AISI304 stainless steel subjected to massive LSP treatment with different pulse energies

K. Luo, L. Wu, Lu Haifei, 2017 .

Surface textural features and its formation process of AISI 304 stainless steel subjected to massive LSP impacts

K. Luo, F. Dai, J. Lu, 2014 .

Effects of laser shock processing on mechanical properties and micro-structure of ANSI 304 austenitic stainless steel

Lai‐Chang Zhang, K. Luo, Jianzhong Zhou, 2011 .

Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts

K. Luo, Sun Guifang, C. Cui, 2010 .

Improved contact load-bearing capacity of ultra-fine grained titanium : Multilayering and grading

P. Hodgson, D. Fabijanic, Dengke Yang, 2014 .

Effects of coverage layer on the electrochemical corrosion behaviour of Mg-Al-Mn alloy subjected to massive laser shock peening treatment

K. Luo, C. Cui, Yongfeng Lu, 2019, Journal of Alloys and Compounds.

Nondestructive measurement of the residual stress TiN thin film coated on AISI 304 substrate by x-ray stress analyzer

Dejun Kong, Ai Xin Feng, Yunlei Zhang, 2006, International Commission for Optics.

Characterization and analyses on micro-hardness, residual stress and microstructure in laser cladding coating of 316L stainless steel subjected to massive LSP treatment

K. Luo, J. Sheng, G. Sun, 2016 .

Microstructural response and grain refinement mechanism of commercially pure titanium subjected to multiple laser shock peening impacts

K. Luo, C. Cui, J. Z. Lu, 2017 .

Residual stress, micro-hardness and tensile properties of ANSI 304 stainless steel thick sheet by fiber laser welding

K. Luo, A. Feng, Youfa Zhang, 2013 .

Microstructure and tensile properties of the sub-micro and nano-structured Al produced by laser surface melting

C. Cui, Y. .. Wang, J. Z. Lu, 2010 .

Effects of laser shock processing and strain rate on tensile property of LY2 aluminum alloy

K. Luo, Jun Zhou, Yong Kang Zhang, 2010 .

Effects of laser shock processing on electrochemical corrosion resistance of ANSI 304 stainless steel weldments after cavitation erosion

K. Luo, A. Feng, Youfa Zhang, 2013 .

Effects of laser shock processing with different shocked paths on mechanical properties of laser welded ANSI 304 stainless steel joint

K. Luo, F. Dai, J. Zhong, 2011 .

On the influence of laser peening with different coverage areas on fatigue response and fracture behavior of Ti–6Al–4V alloy

Jianzhong Zhou, Suqiang Xu, J. Sheng, 2015 .

Effects of laser shock processing on mechanical properties of Fe–Ni alloy

A. Feng, J. Z. Lu, G. Cheng, 2009 .

Microstructure evolution and mechanical properties of aging 6061 Al alloy via laser shock processing

C. Cui, Yongfeng Lu, J. Z. Lu, 2019, Journal of Alloys and Compounds.

Effects of warm laser peening at elevated temperature on the low-cycle fatigue behavior of Ti6Al4V alloy

Z. R. Yang, Jianzhong Zhou, J. Sheng, 2015 .

Strain rate correspondence of fracture surface features and tensile properties in AISI304 stainless steel under different LSP impact time

X. Xu, K. Luo, Jun Zhou, 2013 .

Effect of repeated impacts on mechanical properties and fatigue fracture morphologies of 6061-T6 aluminum subject to laser peening

Jianzhong Zhou, J. Z. Lu, Kangmin Chen, 2012 .

Residual stress distribution of Ti-6Al-4V alloy under different ns-LSP processing parameters

K. Luo, Jianzhong Zhou, J. Z. Lu, 2013 .

Effect of laser shock processing on the mechanical properties and fatigue lives of the turbojet engine blades manufactured by LY2 aluminum alloy

Huixue Yao, Hongbing Yao, X. Ren, 2009 .

Experiment study on CO2 laser cleaning rubber sulfuring mould

Dejun Kong, Ai Xin Feng, Yunlei Zhang, 2006, International Commission for Optics.

Effects of laser shock peening on microstructural evolution and wear property of laser hybrid remanufactured Ni25/Fe104 coating on H13 tool steel

K. Luo, X. Xiang, F. Xing, 2021 .

Microstructural features and corrosion behavior of Fe-based coatings prepared by an integrated process of extreme high-speed laser additive manufacturing

K. Luo, X. Xiang, J. L. Du, 2021 .

Electrochemical and pitting corrosion resistance of AISI 4145 steel subjected to massive laser shock peening treatment with different coverage layers

K. Luo, C. Cui, Li Cong, 2017 .

Ti-based amorphous/nanocrystal composite with high ductility and strain-hardening

P. Čížek, P. Hodgson, D. Fabijanic, 2013 .

Effects of Marangoni convection on the embedding dynamic behavior of SiC nano-particles into the Al molten pool during laser micro-melting

X. D. Li, C. Cui, X. Cui, 2018 .

Micro-structural strengthening mechanism of multiple laser shock processing impacts on AISI 8620 steel

K. Luo, J. Z. Lu, F. Dai, 2011 .

Laser shock wave-induced wear property improvement and formation mechanism of laser cladding Ni25 coating on H13 tool steel

K. Luo, F. Xing, Lu Haifei, 2021 .

Effects of Ni25 transitional layer on microstructural evolution and wear property of laser clad composite coating on H13 tool steel

K. Luo, C. Cui, F. Xing, 2020 .

Cavitation erosion behaviour of AISI 420 stainless steel subjected to laser shock peening as a function of the coverage layer in distilled water and water-particle solutions

K. Luo, C. Wang, C.Y. Wang, 2021 .

Influence of compressive stress on stress intensity factor of hole-edge crack by high strain rate laser shock processing

X. Ren, Lingjiu Zhou, Jing-dong Zhou, 2009 .

Effects of laser energy on fatigue crack growth properties of 6061-T6 aluminum alloy subjected to multiple laser peening

Jianzhong Zhou, J. Sheng, Shu Huang, 2013 .

Effect of laser peening with different energies on fatigue fracture evolution of 6061-T6 aluminum alloy

Jianzhong Zhou, Suqiang Xu, J. Sheng, 2016 .

Effects of laser shock peening on the micro-hardness, tensile properties, and fracture morphologies of CP-Ti alloy at different temperatures

K. Luo, C. Cui, J. Z. Lu, 2018 .

Tensile properties, residual stress distribution and grain arrangement as a function of sheet thickness of Mg–Al–Mn alloy subjected to two-sided and simultaneous LSP impacts

K. Luo, Bin Liu, J. Z. Lu, 2016 .

Effects of overlapping rate on the uniformities of surface profile of LY2 Al alloy during massive laser shock peening impacts

K. Luo, J. Z. Lu, T. Lin, 2015 .

Effects of laser peening with different coverage areas on fatigue crack growth properties of 6061-T6 aluminum alloy.

Jianzhong Zhou, Jie Sheng, Meng Xiankai, 2013 .

Investigation of the stress intensity factor changing on the hole crack subject to laser shock processing

X. Ren, Lingjiu Zhou, Y. K. Zhang, 2009 .

Microstructural evolution in the welding zone of laser shock peened 316L stainless steel tube

K. Luo, L. Wu, J. Lu, 2017 .

Simulation, analysis and validation of residual stresses on LY2 aluminium alloy by laser shock processing with elliptical spot

K. Luo, A. Feng, C. J. Yang, 2011 .

Microstructures and mechanical properties of laser melting deposited Ti6Al4V/316L functional gradient materials

K. Luo, F. Xing, Z. Wang, 2021 .