Rudy Van Impe

发表

Glued and preloaded bolted connections for laminated float glass

Jan Belis, Dieter Callewaert, Rudy Van Impe, 2007 .

Stringer stiffened cylinders on local supports - The search for a design rule

Rudy Van Impe, Guy Lagae, Wesley Vanlaere, 2005 .

Evaluation of Glass Domes Using PyFormex

Jan Belis, Rudy Van Impe, Matthieu De Beule, 2007 .

Laminating metal-to-glass: preliminary results of case-study

Jan Belis, Dieter Callewaert, Rudy Van Impe, 2009 .

Optimization of a Space Truss Dome - Genetic Algorithms

Rudy Van Impe, Wesley Vanlaere, Peter Buffel, 2004 .

Cellular members loaded by an eccentric axial force: a design rule proposal for the elastic critical buckling load

Rudy Van Impe, Delphine Sonck, 2011 .

Recent studies on conical water tanks.

Jan Belis, Rudy Van Impe, Guy Lagae, 2001 .

Applicability of the EC3-rule "General Method for LTB of Frames" for Tip Loaded Cantilever Beams

Rudy Van Impe, Guy Lagae, Matthieu De Beule, 2003 .

An Alternate Compaction Grouting Technique

Rudy Van Impe, Alex Naudts, 2000 .

Elastic lateral-torsional buckling of cellular beams

Rudy Van Impe, Wesley Vanlaere, Delphine Sonck, 2010 .

Finite element stent design optimization: towards a uniform expanding first generation Palmaz-Schatz stent

Pascal Verdonck, Rudy Van Impe, Matthieu De Beule, 2005 .

Ethics in engineering today.

Jan Belis, Rudy Van Impe, 2001 .

Finite element analysis and stent design: Vascular reaction to stent deployment

Pascal Verdonck, Rudy Van Impe, Matthieu De Beule, 2005 .

The invisible building: advanced research on glass structures

Jan Belis, Rudy Van Impe, 2004 .

Instabilities of cellular members loaded in bending or compression

Rudy Van Impe, Nicolas Boissonnade, Delphine Sonck, 2012 .

Estimating the necessary section of I-beams with neural networks.

Jan Belis, Rudy Van Impe, Guy Lagae, 2002 .

Influence of web openings on failure by lateral-torsional buckling of cellular beams

Rudy Van Impe, Guy Lagae, Wesley Vanlaere, 2009 .

Designing lighter steel structures with cellular beams

Rudy Van Impe, Wesley Vanlaere, Delphine Sonck, 2011 .

Influence of Dimensions of Longitudinal Stiffeners on the Buckling Behaviour of Locally Supported Cylinders

Rudy Van Impe, Guy Lagae, Wesley Vanlaere, 2003 .

Artificial neural networks and risk stratification: A promising combination

Rudy Van Impe, Matthieu De Beule, Wesley Vanlaere, 2007, Math. Comput. Model..

Comparison od design buckling stresses for liquid-filled cones obtained with two different procedures.

Jan Belis, Rudy Van Impe, Guy Lagae, 2002 .

Comparison of Numerically Determined Failure Loads of Liquid-Filled Conical Shells with Experimental Test Results

Rudy Van Impe, Guy Lagae, Wesley Vanlaere, 2008 .

Seamless connection of soda-lime float glass by welding: preliminary test results

Jan Belis, Dieter Callewaert, Rudy Van Impe, 2006 .

NUMERICAL STUDY OF IMPERFECT LIQUID-FILLED CONICAL SHELLS Verifying the Present Design Rule

Rudy Van Impe, Guy Lagae, Wesley Vanlaere, 2008 .

Column-supported silos: Elasto-plastic failure

Rudy Van Impe, Arne Jansseune, Wouter De Corte, 2013 .

Design of Stringer Stiffeners for Cylindrical Shells on Local Supports

Rudy Van Impe, Guy Lagae, Wesley Vanlaere, 2005 .

Finite Element Stent Design: Parametric Modeling of Braided Wirestents Using PyFormex

Pascal Verdonck, Rudy Van Impe, Matthieu De Beule, 2007 .

The Influence of Rotational Restraint on the Behaviour of Cold-Formed Steel Continuous Purlins Attached to Roof Sheeting

Rudy Van Impe, Guy Lagae, M. De Strycker, 2006 .

High performance computing and finite element stent design - a promising combination

Rudy Van Impe, Matthieu De Beule, Benedict Verhegghe, 2005 .

Effect of axial force on torsion of thin-walled steel members by means of stability functions.

Jan Belis, Rudy Van Impe, Guy Lagae, 2002 .

Geometric Imperfections and Their Influence on the Ultimate Load of Thin-Walled, Cold-Formed Steel Purlins

Rudy Van Impe, Guy Lagae, Wesley Vanlaere, 2006 .

Study of residual stresses in I-section members and cellular members

Rudy Van Impe, Delphine Sonck, 2013 .

A story about standardization for design of glass works

Jan Belis, Dieter Callewaert, Didier Delincé, 2010 .

Finite element stent design: modeling braided wirestent expansion

Pascal Verdonck, Michele Conti, Rudy Van Impe, 2007 .

Buckling of Stringer Stiffened Cylinders on Local Supports

Rudy Van Impe, Guy Lagae, Wesley Vanlaere, 2006 .

Buckling of cellular members loaded by an axial force

Rudy Van Impe, Wesley Vanlaere, Delphine Sonck, 2010 .

Artificial Neural Networks and Cardiology: a Fertile Symbiosis?

Rudy Van Impe, Matthieu De Beule, Wesley Vanlaere, 2004 .

Mechanics of new generation braided wire stents

Pascal Verdonck, Rudy Van Impe, Matthieu De Beule, 2008 .

Hyperbolic functions for modelling the elasto-plastic behaviour of soils in the evolutional, non-linear analysis of slurry walls and sheet-piling structures

Jan Belis, Rudy Van Impe, Guy Lagae, 2003 .

Influence of the cylinder height on the elasto-plastic failure of locally supported cylinders

Wouter De Corte, Rudy Van Impe, Wesley Vanlaere, 2012 .

Confronting non-linear and evolutional numerical analyses of horizontally loaded piles embedded in soils with experimental results and the concept of safety

Jan Belis, Rudy Van Impe, Guy Lagae, 2003 .

Lateral-torsional and lateral-distortional buckling of I-section members with web openings

Jan Belis, Rudy Van Impe, Guy Lagae, 2009 .

The use of lateral restraints to increase the load-bearing capacity of glass beams.

Jan Belis, Rudy Van Impe, Guy Lagae, 2002 .

A design concept to avoid failure of structural glass beams in buildings

Jan Belis, Rudy Van Impe, Guy Lagae, 2004 .

Brandweerstand van staalconstructies volgens EN1993-1-2: postacademische opleiding 'Brandbeveiliging van gebouwen, constructieve aspecten - de Eurocodes' in het kader van 'Fire Safety Engineering'

Rudy Van Impe, 2010 .

Buckling failure of compressed cellular members

Jan Belis, Rudy Van Impe, Delphine Sonck, 2011 .

Local loads in cylindrical structures

Rudy Van Impe, 1994 .

Steel cylinders on local supports with rigid stiffeners

Rudy Van Impe, Guy Lagae, Wesley Vanlaere, 2009 .

Experimental investigation of local buckling of axially compressed steel cylinders on discrete supports, effects of reinforcement by means of a thicker bottom course

Rudy Van Impe, Guy Lagae, F Dhanens, 1995 .

On the imperfections of cylindrical shells on local supports

Rudy Van Impe, Guy Lagae, Matthieu De Beule, 2006 .

Optimization of a Space Truss Dome - Evolution Strategies

Rudy Van Impe, Wesley Vanlaere, Peter Buffel, 2004 .

Rethinking the Design of Liquid-Filled Conical Shells

Jan Belis, Rudy Van Impe, Guy Lagae, 2003 .

Plastic collapse of steel water towers

Wouter De Corte, Rudy Van Impe, Wesley Vanlaere, 2011 .

Eurocode 3: staal

Rudy Van Impe, 2001 .

On the structural behaviour of elevated steel silos

Rudy Van Impe, Guy Lagae, Wesley Vanlaere, 2006 .

An alternate compaction grouting technique. Advances in grouting and ground modification.

Rudy Van Impe, A Naudts, 2000 .

Effect of Gravity and Uplift Loads on Rotational Restraint in Cold-formed Steel Z-Purlin-Sheeting Systems

Rudy Van Impe, Guy Lagae, Maarten De Strycker, 2005 .

Locally supported cylinders with rigid stiffeners: elasto-plastic failure

Wouter De Corte, Rudy Van Impe, Arne Jansseune, 2011 .

Loadbearing Glass Constructions.

Jan Belis, Rudy Van Impe, Guy Lagae, 2001 .

Experimental and numerical study of buckling glass beams with 2m span

Jan Belis, Rudy Van Impe, Guy Lagae, 2003 .

Magazijnrekken en FEM

Rudy Van Impe, F Dhanens, Jacques Rathé, 1991 .

Influence of Additional Displacement Restraints by Overlap Tests of Purlin Systems

Jan Belis, Rudy Van Impe, Guy Lagae, 2001 .

Monolithic calculation model for the out-of-plane bending of laminated glass beams

Jan Belis, Rudy Van Impe, Wesley Vanlaere, 2003 .

Plastic Buckling of Conical Tanks with Large Geometrical Imperfections

Rudy Van Impe, Guy Lagae, Wesley Vanlaere, 2007 .

Stability approach of the dimensioning of glass beams

Jan Belis, Rudy Van Impe, Guy Lagae, 2004 .

Effect of varying the size of flatbar stiffeners on the buckling behaviour of thin cylinders on local supports

Rudy Van Impe, Guy Lagae, Wesley Vanlaere, 2005 .

Experimental investigation of residual stresses in steel cellular and castellated members

Jan Belis, Rudy Van Impe, Delphine Sonck, 2014 .

Experimental Buckling Analysis of Cylinders with discrete stringer stiffeners above the local supports.

Jan Belis, Rudy Van Impe, Guy Lagae, 2001 .

Experimental assessment of cold-bent glass panels

Jan Belis, Dieter Callewaert, Rudy Van Impe, 2007 .

The Effect of Post-Tensioning On the Buckling Behaviour of a Glass T-beam

Jan Belis, Dieter Callewaert, Rudy Van Impe, 2006 .

The buckling behaviour of steel cylinders with engaged columns

Dieter Callewaert, Rudy Van Impe, Guy Lagae, 2009 .

Numerical stress analysis of the Fredericton Water tower collapse according to a proposed modified reference length in the ECCS rules for liquid-filled conical shells.

Jan Belis, Rudy Van Impe, Guy Lagae, 2001 .

Finite element analysis and stent design

Pascal Verdonck, Rudy Van Impe, Matthieu De Beule, 2005 .

Boundary Conditions for Stringer Stiffened Cylindrical Shells on Local Supports

Jan Belis, Rudy Van Impe, Guy Lagae, 2003 .

Cold bending of laminated glass panels

Jan Belis, Dieter Callewaert, Rudy Van Impe, 2007 .