Michael Sinapius

Johannes Riemenschneider, Hans Peter Monner, Michael Sinapius, 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Design, Test and Comparison of mechanical support principles to increase the robustness of deployable thin shell CFRP Booms of the deorbiting device ADEO

Michael Sinapius, Christian Hühne, Martin E. Zander, 2017 .

Eco-efficiency assessment of manufacturing carbon fiber reinforced polymers (CFRP) in aerospace industry

Michael Sinapius, Philipp Hilmer, Ali Al-Lami, 2018, Aerospace Science and Technology.

Virtual sensors for SHM using isogeometric piezoelectric finite elements

Christian Willberg, Michael Sinapius, Artur Szewieczek, 2015 .

MECHANICAL CHARACTERIZATION OF DEPLOYABLE THIN SHELL CFRP BOOMS FOR THE CUBESAT “DE-ORBIT SAIL”

Michael Sinapius, Christian Hühne, Martin E. Zander, 2015 .

Design and Sizing of a 40m² Deployable Membrane SAR Space Antenna

Michael Sinapius, Marco Straubel, Stéphane Langlois, 2012 .

Concepts and Simulated Testing of Active Railway-Wheels

Michael Sinapius, Stephan Algermissen, Paul Lorsch, 2013 .

Experimental investigation of the very high cycle fatigue behaviour of fibre reinforced composites

Peter Wierach, Michael Sinapius, Paul Lorsch, 2012 .

Ultrasonic Wave Propagation in Aerospace Structures: Highly Efficient Simulation with a Minimal Model

Peter Wierach, Michael Sinapius, Christoph Heinze, 2018 .

A Piezo-Actuated Slot Lip for active High Lift

Peter Wierach, Michael Sinapius, Christian Behr, 2013 .

Primary structure mass estimation in early phases of aircraft development using the finite element method

Ulrich Gabbert, Michael Sinapius, J. Wenzel, 2012 .

Design of a high-lift experiment in water including active flow control

Peter Wierach, Stephanus Büttgenbach, Michael Sinapius, 2014 .

A robust design strategy for thin-walled composite structures under compression load based on the assessment of the structural energy

Richard Degenhardt, Michael Sinapius, Tobias Wille, 2012 .

Simulation and Test on Mechanical Behavior of a Deployable Membrane Antenna

Michael Sinapius, Christian Hühne, Marco Straubel, 2010 .

Morphing Activities DLR and EU

Hans Peter Monner, Michael Sinapius, 2008 .

Development and characterization of anti-icing surfaces: a new analytical approach

Peter Wierach, Martin Wiedemann, Michael Sinapius, 2017 .

DLR Research Activities for Structural Health Monitoring in Aerospace Structures

Peter Wierach, Michael Sinapius, Wolfgang Hillger, 2010 .

Robust Gain Scheduling for Smart-Structures in Parallel Robots

Michael Sinapius, Stephan Algermissen, 2011, Robotic Systems for Handling and Assembly.

Adaptive Feeding Roller with an Integrated Cutting System for Automated Fiber Placement (AFP)

Michael Sinapius, Mohammad Bahar, 2020 .

Structural Health Monitoring Based on Guided Waves

Michael Sinapius, Wolfgang Hillger, Artur Szewieczek, 2013 .

Actuation-mechanisms of CNT-bucky papers and CNT-arrays

Peter Wierach, Michael Sinapius, Sebastian Geier, 2015, Smart Structures.

Development and Testing of Woven FRP Flexure Hinges for Pressure-Actuated Cellular Structures with Regard to Morphing Wing Applications

Michael Sinapius, Christian Hühne, Patrick Meyer, 2019 .

Guided Wave Displacement Validation for SHM Applications using Air Coupled Ultrasonic Scanning Technique

Michael Sinapius, Christoph Heinze, Artur Szewieczek, 2015 .

Advanced correlation criteria for the mid frequency range

Marc Böswald, Michael Sinapius, Jörn Biedermann, 2016 .

Structural integrated sensor and actuator systems for active flow control

Peter Wierach, Michael Sinapius, Andreas Dietzel, 2016, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Lamb Wave Propagation in Complex Geometries - Model Reduction with Approximated Stiffeners

Peter Wierach, Michael Sinapius, Christoph Heinze, 2014 .

MECHANICAL TESTING OF DEPLOYABLE THIN SHELL CFRP BOOMS IN IDEAL AND REALISTIC INTERFACES FOR THE SOLAR SAIL DEMONSTRATOR GOSSAMER-1

Michael Sinapius, Christian Hühne, Martin E. Zander, 2016 .

Fast Approximation of Wave Propagation in Complex Geometries

Peter Wierach, Michael Sinapius, Christoph Heinze, 2016 .

INTL - A Strategy for the Identification and Characterization of Non-linearities within Modal Survey Testing

Dennis Göge, Michael Sinapius, Ulrich Füllekrug, 2004 .

Virtual Sensors for SHM

Michael Sinapius, Artur Szewieczek, 2018 .

Structural Health Monitoring of Composite Structures

Peter Wierach, Michael Sinapius, Wolfgang Hillger, 2011 .

Smart-Structures Technology for Parallel Robots

Hans Peter Monner, Michael Rose, Michael Sinapius, 2011, J. Intell. Robotic Syst..

Design of mode selective actuators for Lamb wave excitation in composite plates

Peter Wierach, Michael Sinapius, Christoph Heinze, 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

DLR's Morphing Wing Activities within the European Network

Johannes Riemenschneider, Hans Peter Monner, Michael Sinapius, 2014 .

Robust Gain-Scheduling Control for Parallel Robots with Smart-Structure Components

Michael Rose, Michael Sinapius, Stephan Algermissen, 2008 .

Design and Implementation of Adaptronic Robot Components

Michael Sinapius, Ralf Keimer, M. Sinapius, 2011, Robotic Systems for Handling and Assembly.

Analysis Method for Guided Wave Propagation Direction in Anisotropic Structures

Michael Sinapius, Artur Szewieczek, 2016 .

Health Monitoring of Complex Structures Using Guided Waves

Peter Wierach, Michael Sinapius, Florian Raddatz, 2015 .

The Feasibility of Replacing Base Excitation by Modal Forces in Qualification Testing - The PPF Case Study

Michael Sinapius, Ulrich Füllekrug, 1997 .

Adaptive, Tolerant and Efficient Composite Structures - Introduction

Martin Wiedemann, Michael Sinapius, 2012 .

Force Measurement in Vibration Testing - Applications to Modal Identification

Michael Sinapius, Ulrich Fuellekrug Fuellekrug, 2001 .

Lamb Wave Propagation in Complex Geometries - A Minimal Model Approach

Peter Wierach, Michael Sinapius, Christoph Heinze, 2015 .

Sound radiation properties of complex modes of vibration

Michael Sinapius, Oliver Unruh, 2013 .

Sensor Design Optimization for Ultrasonic Spectroscopy Cure Monitoring

Michael Sinapius, Christian Pommer, 2018, Sensors.

A robustness-based design strategy for composite structures

Richard Degenhardt, Michael Sinapius, Rolf Zimmermann, 2014 .

Characterization of mode selective actuator and sensor systems for Lamb wave excitation

Peter Wierach, Michael Sinapius, Christoph Heinze, 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Evaluation of residual stress development in FRP-metal hybrids using fiber Bragg grating sensors

Christian Huhne, Michael Sinapius, Daniel Stefaniak, 2018, Prod. Eng..

An Approach for Autonomous Damage Detection by Means of Modal Fingerprints

Michael Sinapius, Marcus Perner, Helmut Beikirch, 2011 .

On Ground Rigidized, Deployable Masts for Large, Gossamer Space Structures

Michael Sinapius, Marco Straubel, Stéphane Langlois, 2009 .

Novel Pressure Sensor for Aerospace Purposes

Peter Wierach, Stephanus Büttgenbach, Michael Sinapius, 2010 .

Robustness Assessment of Stiffened Thin-Walled Composite Structures in Post-Buckling

Richard Degenhardt, Michael Sinapius, Tobias Wille, 2013 .

Investigations of the key mechanism of carbon-nanotube actuators and their dependencies

Johannes Riemenschneider, Peter Wierach, Michael Sinapius, 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Investigation of aligned carbon nanotube architectures to understand the actuation mechanism

Johannes Riemenschneider, Peter Wierach, Michael Sinapius, 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Experimental study of two electro-mechanical de-icing systems applied on a wing section tested in an icing wind tunnel

Peter Horst, Michael Sinapius, Matthias Endres, 2017 .

Sensor and Actuator Systems for Active Flow Control

Peter Wierach, Stephanus Büttgenbach, Michael Sinapius, 2015 .

Automated Scarfing Process for Bonded Composite Repairs

Michael Sinapius, Dirk Holzhüter, Christian Hühne, 2013 .

Parameter study and experimental analysis of a thermo-mechanical de-icing concept

Michael Sinapius, Ozan Tamer, Alexander Kyriazis, 2020, Smart Materials and Structures.

Methodology for the high-frequency testing of fiber-reinforced plastics

Peter Wierach, Michael Sinapius, Paul Lorsch, 2018 .

A robustness-based design strategy for composite structures – probabilistic approach

Richard Degenhardt, Michael Sinapius, Rolf Zimmermann, 2014 .

Rapid transformation of lamination parameters into stacking sequences

Michael Sinapius, Christian Hühne, Sascha Dähne, 2021 .

Smart Inlays for Simultaneous Crack Sensing and Arrest in Multifunctional Bondlines of Composites

Michael Sinapius, Christian Hühne, Andreas Dietzel, 2021, Sensors.

Stainless-Steel Antenna on Conductive Substrate for an SHM Sensor System with High Power Demand

Michael Sinapius, Walter Lang, Andreas Dietzel, 2021, Sensors.

A NEAT Based Two Stage Neural Network Approach to Generate a Control Algorithm for a Pultrusion System

Michael Sinapius, Christian Pommer, Marco Brysch, 2021, AI.

The Working Principles of a Multifunctional Bondline with Disbond Stopping and Health Monitoring Features for Composite Structures

Michael Sinapius, Christian Hühne, Andreas Dietzel, 2021, Journal of Composites Science.

Space-Filling Curve Resistor on Ultra-Thin Polyetherimide Foil for Strain Impervious Temperature Sensing

Michael Sinapius, Andreas Dietzel, Alexander Kyriazis, 2021, Sensors.

Embedded autoencoder-based condition monitoring of rotating machinery

Michael Sinapius, Alexander Boschmann, Christian Pommer, 2021, 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ).

Transient Dynamic System Behavior of Pressure Actuated Cellular Structures in a Morphing Wing

Michael Sinapius, Christian Hühne, Jens Friedrichs, 2021, Aerospace.

Modeling of Carbon Nanotube Actuators: Part II — Mechanical Properties, Electro Mechanical Coupling and Validation of the Model

Johannes Riemenschneider, Hans Peter Monner, Steffen Opitz, 2009 .

FIBRE-REINFORCED NANOCOMPOSITES FOR SPACECRAFT STRUCTURES Manufacturing, Characterisation and Application

Michael Sinapius, Jürgen Mosch, Ulrich Riedel, 2005 .

Detection and description of non-linear phenomena in experimental modal analysis via linearity plots

Dennis Göge, Michael Sinapius, Michael Link, 2005 .

A hybrid bondline concept for bonded composite joints

Michael Sinapius, Dirk Holzhüter, Christian Hühne, 2016 .

Carbon nanotube array actuators

Peter Wierach, Michael Sinapius, Sebastian Geier, 2013 .