J. Moore

发表

Effects of Changes in Structural Hydration of Multiphasic Heterogeneous Calcium Phosphate Powders Created via Auto-Ignition Combustion Synthesis

N. Vollmer, R. Ayers, D. Burkes, 2007 .

Microstructure and kinetics of a functionally graded NiTi–TiCx composite produced by combustion synthesis

D. Burkes, J. Moore, J. J. Moore, 2007 .

The β to α phase transition of tantalum coatings deposited by modulated pulsed power magnetron sputtering

W. Sproul, Jianliang Lin, R. Souza, 2013 .

Tribological behavior of candidate coatings for Al die casting dies

O. Salas, S. Carrera, J. Moore, 2003 .

Effects of the magnetic field strength on the modulated pulsed power magnetron sputtering of metallic films

W. Sproul, S. Lee, Jianliang Lin, 2011 .

Comparative investigation of Ti–Si–N films magnetron sputtered using Ti5Si3+Ti and Ti5Si3+TiN targets

F. V. Kiryukhantsev-Korneev, E. Levashov, S. Kulinich, 2003 .

11 – Future trends in surface coatings for protection against wear

B. Mishra, A. Kunrath, D. Zhong, 2006 .

Osteoblast-like cell mineralization induced by multiphasic calcium phosphate ceramic

H. Kleebe, V. Ferguson, S. Nielsen-Preiss, 2006 .

Reaction steps in the combustion synthesis of NiAl/TiB2 composites

G. Mustoe, I. Reimanis, R. Torres, 2000 .

Synthesis and characterization of Ti-Si-C-N films

E. Levashov, D. Shtansky, A. Sheveiko, 1999 .

The Structure and Properties of Ti–B–N, Ti–Si–B–N, Ti–Si–C–N, and Ti–Al–C–N Coatings Deposited by Magnetron Sputtering Using Composite Targets Produced by Self-Propagating High-Temperature Synthesis (SHS)

E. Levashov, D. Shtansky, A. Sheveiko, 1998 .

Finite element analysis of a coating architecture for glass-molding dies

G. Mustoe, D. Zhong, J. Disam, 2001 .

Personalized implant for high tibial opening wedge: Combination of solid freeform fabrication with combustion synthesis process

L. Yahia, R. Ayers, R. Moufarrège, 2012, Journal of biomaterials applications.

Microstructure of amorphous diamond-like carbon thin films and changes during wear

B. Mishra, E. Sutter, J. Goldsmith, 2005 .

Developing a MoSi2+SiC Oxidation Resistant Coating for Mo, A Prototype Refractory Metal

G. Mustoe, H. Kleebe, D. Olson, 2013 .

Effect of asynchronous pulsing parameters on the structure and properties of CrAlN films deposited by pulsed closed field unbalanced magnetron sputtering (P-CFUBMS)

W. Sproul, Jianliang Lin, J. Rees, 2008 .

Modulated pulse power sputtered chromium coatings

W. Sproul, Jianliang Lin, Zhili Wu, 2009 .

Theoretical studies of chemisorption and dimer model systems: Moeller-Plesset and configuration interaction calculations on palladium hydride (PdH), palladium carbide (PdC), palladium oxide (PdO), palladium fluoride (PdF), palladium dimer, and palladium carbonyl (PdCO)

P. Schwerdtfeger, M. Dolg, D. Andrae, 1991 .

Microstructural study of Ti50Pd50 and Ti50Ni50−xPdx alloys produced by combustion synthesis

A. Petric, H. Yi, J. Moore, 1992 .

Combustion Synthesis of Ti-Pd and Ti-Ni-Pd High Transition Temperature Shape Memory Alloys

H. Yi, J. Moore, 1991 .

Combustion synthesis of porous biomaterials.

L. Yahia, H. Yi, R. Ayers, 2007, Journal of biomedical materials research. Part A.

Advances in Thin Film Technology through the Application of Modulated Pulse Power Sputtering

B. Mishra, W. Sproul, J. Moore, 2010 .

Soldering mechanisms in materials and coatings for aluminum die casting

I. Baumvol, E. Tentardini, C. Aguzzoli, 2008 .

High rate deposition of thick CrN and Cr2N coatings using modulated pulse power (MPP) magnetron sputtering

W. Sproul, John J. Moore, S. Lee, 2011 .

Influence of inclusions and heat treated microstructure on hydrogen assisted fracture properties of aisi 316 stainless steel

M. Hebsur, J. Moore, J. J. Moore, 1985 .

Self-propagating high-temperature (combustion) synthesis (SHS) of powder-compacted materials

H. Yi, J. Moore, J. J. Moore, 1990 .

Synthesis of nanocomposite thin films based on the Mo-Si-C ternary system and compositional tailoring through controlled ion bombardment

S. Govindarajan, J. Disam, J. Moore, 1998 .

Combustion synthesis of TiC–Cr3C2 composites

I. Reimanis, A. Kunrath, J. Moore, 2001 .

Preparation of calcium aluminate matrix composites by combustion synthesis

H. Yi, J. Guigné, L. A. Robinson, 2002 .

Combustion synthesis of advanced materials: Part II. Classification, applications and modelling

H. Feng, J. Moore, J. J. Moore, 1995 .

Combustion synthesis of advanced materials: Part I. Reaction parameters

John J. Moore, H. Feng, J. Moore, 1995 .

Auto-Ignition Combustion Synthesis of Calcium Aluminate Ceramic Powders

D. Burkes, J. Moore, J. J. Moore, 2007 .

Synthesis of molybdenum disilicide on molybdenum substrates

B. Mishra, D. Olson, John J. Moore, 1995 .

Combustion synthesis of LiGa and LiAl intermetallic alloys

B. Mishra, J. Moore, S. Pritchett, 1995 .

Combustion Synthesis of MoSi 2 and MoSi 2 -Composites

B. Mishra, D. Olson, K. Monroe, 1993 .

Effect of heating rate on the combustion synthesis of Ti-Al intermetallic compounds

A. Petric, H. Yi, J. Moore, 1992 .

Characteristics of Porous B4C-Al2O3 Composites Fabricated by the Combustion Synthesis Technique

H. Yi, J. Guigné, L. A. Robinson, 2004 .

Combustion synthesis of TiNi intermetallic compounds

H. Yi, J. Moore, J. J. Moore, 1989 .

Microstructural Evolution of Titanium Carbide–Chromium Carbide (TiC–Cr3C2) Composites Produced via Combustion Synthesis

I. Reimanis, A. Kunrath, J. Moore, 2004 .

Synthesis and application of composite TIC-CR3C2 targets

I. Reimanis, K. Upadhya, A. Kunrath, 1997 .

Combustion synthesis of metal-matrix composites: Part III, the Al-Tic-Al2O3 system

T. Strohaecker, A. Kunrath, J. Moore, 1996 .

Development of a diffusion barrier layer for silicon and carbon in molybdenum—a physical vapor deposition approach

C. Suryanarayana, S. Govindarajan, J. Disam, 1999 .

The combustion synthesis of advanced materials

D. W. Readey, B. Mishra, John J. Moore, 1994 .

Combustion synthesis of ceramic-metal

H. Feng, D. Wirth, J. Moore, 1992, Metallurgical and Materials Transactions A.

Combustion Synthesis of NiTi – TiC Composites with Controlled Porosity for Biomedical Applications

H. Yi, R. Ayers, D. Burkes, 2003 .

Production of Ni3Ti−TiC x intermetallic-ceramic composites employing combustion synthesis reactions

H. Yi, D. Burkes, J. Moore, 2006 .

Combustion synthesis of ceramic and metal-matrix composites

H. Feng, D. Wirth, J. Moore, 1993 .

Combustion Synthesis of a Functionally Graded NiTi-TiCx Composite

D. Burkes, J. Moore, J. J. Moore, 2006 .

Synthesis of Ti-Al Intermetallic Compounds by Combustion Synthesis

A. Petric, H. Yi, J. Moore, 1992 .

Influence of the Processing Route in the Microstructure and Mechanical Properties of NiAl/TiB2 Composites Produced by Combustion Synthesis

I. Reimanis, R. Torres, C. M. Lepienski, 2009 .

Microstructures, mechanical properties, and tribological behaviors of Cr–Al–N, Cr–Si–N, and Cr–Al–Si–N coatings by a hybrid coating system

K. Kim, J. Rha, John J. Moore, 2007 .

Combustion synthesis and mechanical properties of dense NiTi-TiC intermetallic-ceramic composites

H. Yi, D. Burkes, J. Moore, 2006 .

Quantitative investigation of copper/indium multilayer thin film reactions

K. A. Lindahl, D. Olson, R. Noufi, 1996 .

The structure and mechanical and tribological properties of TiBCN nanocomposite coatings

W. Sproul, Jianliang Lin, B. Mishra, 2010 .

Nanostructured thin films and nanodispersion strengthened coatings

E. Levashov, A. Voevodin, D. Shtansky, 2004 .

Mechanical properties of porous combustion synthesized Ni3Ti-TiCx composites

John J. Moore, D. Burkes, Guglielmo Gottoli, 2006 .

Effect of carbon on TiAlCN coatings deposited by reactive magnetron sputtering

Jianqing Jiang, Jianliang Lin, Xuhai Zhang, 2008 .

Mechanisms of Oxide Whisker Growth

D. W. Readey, N. Chen, J. Moore, 2008 .

Combustion Synthesis of Glass (B2O3-Al2O3-MgO)-Ceramic (TiB2) Composites

John J. Moore, H. Yi, J. Guigné, 2002 .

Effects of calcium nitride and calcium carbonate gasifying agents on the porosity of Ni3Ti–TiC composites produced by combustion synthesis

J. Milwid, D. Burkes, J. Moore, 2006 .

The Application of Self-Propagating High-Temperature Synthesis of Engineered Porous Composite Biomedical Materials

H. Yi, R. Ayers, D. Burkes, 2007 .

In situ combustion synthesis of dense ceramic and ceramic-metal interpenetrating phase composites

H. Feng, J. Moore, J. J. Moore, 1995 .

Combustion synthesis of metal-matrix composites: Part II, the Ti-TixAly-Al2O3 system

T. Strohaecker, A. Kunrath, J. Moore, 1996 .

Optimization of PVD Parameters for the Deposition of Ultrahard Ti–Si–B–N Coatings

E. Levashov, D. Shtansky, A. Sheveiko, 1999 .

Structure and physical-mechanical properties of nanostructured thin films

D. V. Shtanskii, E. Levashov, E. Levashov, 2003 .

Localized deformation of multicomponent thin films

E. Levashov, S. Kulinich, D. Shtansky, 2002 .

Syntheses and mechanical properties of Ti–B–C–N coatings by a plasma-enhanced chemical vapor deposition

Y. Cho, K. Kim, John J. Moore, 2004 .

The structure and properties of chromium nitride coatings deposited using dc, pulsed dc and modulated pulse power magnetron sputtering

W. Sproul, Jianliang Lin, Zhili Wu, 2010 .

Pulsed Closed Field Unbalanced Magnetron Sputtering (P-CFUBMS) Deposited TiC/a:C Thin Films

B. Mishra, M. Pinkas, J. Moore, 2007 .

Electrostatic quadrupole plasma mass spectrometer and Langmuir probe measurements of mid-frequency pulsed DC magnetron discharges

C. Muratore, J. Rees, J. Moore, 2003 .

A study of the oxidation behavior of CrN and CrAlN thin films in air using DSC and TGA analyses

B. Mishra, W. Sproul, Jianliang Lin, 2008 .

Low temperature growth mechanisms of vertically aligned carbon nanofibers and nanotubes by radio frequency-plasma enhanced chemical vapor deposition

Huiyao Wang, J. Moore, J. J. Moore, 2012 .

Microstructure of Molybdenum Disilicide‐Silicon Carbide Nanocomposite Thin Films

Kim M. Jones, T. Ohno, John J. Moore, 2005 .

Thermal Conductivity in Nanocrystalline Ceria Thin Films

S. Phillpot, D. Hurley, Lingfeng He, 2014 .

Grain growth and mechanical properties of CeO2-x films deposited on Si(100) substrates by pulsed dc magnetron sputtering

D. Hurley, T. Allen, M. Manuel, 2013 .

Syntheses and characterization of TiC/a:C composite coatings using pulsed closed field unbalanced magnetron sputtering (P-CFUBMS)

B. Mishra, W. Sproul, Jianliang Lin, 2008 .

Composition and oxidation resistance of Ti–B–C and Ti–B–C–N coatings deposited by magnetron sputtering

B. Mishra, E. Levashov, T. Ohno, 2003 .

High temperature oxidation behavior of CrN/AlN superlattice films

W. Sproul, Jianliang Lin, Jun Wang, 2011 .

Structure and properties of Ti-C-B composite thin films produced by sputtering of composite TiC-TiB2 targets

E. Levashov, D. Olson, J. Moore, 1997 .

Effects of Silica on the Combustion Synthesis and Glass Formation of TiB2‐Containing Calcium Aluminate Matrix Composites

J. Guigné, H. Yi, L. A. Robinson, 2006 .

Effects of gravity on combustion synthesis of functionally graded biomaterials

H. Yi, R. Ayers, J. Guigné, 2003 .

Recent microgravity results in the synthesis of porous materials

A. Manerbino, F. Schowengerdt, D. Johnson, 2008 .

COMBUSTION SYNTHESIS OF POROUS CERAMICS ON SPACE-DRUMS™

H. Yi, R. Ayers, J. Guigné, 2001 .

Effects of calcium nitride and calcium carbonate gasifying agents on the combustion synthesis of Ni3Ti-TiC composites

D. Burkes, J. Moore, G. Gottoli, 2006 .

Reactive Ni/Ti nanolaminates

Mark A. Rodriguez, J. P. McDonald, E. Jones, 2009 .

Exothermic reactions in Co/Al nanolaminates

Mark A. Rodriguez, E. Jones, D. Adams, 2008 .

The prospects of nanodispersive powders application in surface engineering technologies

E. Levashov, D. Shtansky, A. Kudryashov, 2004 .

Deposition and characterization of NiAl and Ni–Al–N thin films from a NiAl compound target

T. Ohno, I. Dahan, S. Thiel, 2000 .

Deposition of NiAl thin films from NiAl compound target fabricated via combustion synthesis

I. Dahan, S. Thiel, D. Zhong, 1999 .

Combustion Synthesis of Ni-Ti-X Shape Memory Alloys

John J. Moore, Ru Chun Yi, J. Moore, 1991 .

Structure and properties of CrSiN nanocomposite coatings deposited by hybrid modulated pulsed power and pulsed dc magnetron sputtering

W. Sproul, Jianliang Lin, Y. Ou, 2013 .

Structure and properties of selected (Cr―Al―N, TiC―C, Cr―B―N) nanostructured tribological coatings

B. Mishra, W. Sproul, G. Doll, 2010 .

Microstructure and mechanical properties of Ti-B-C-N-Si nanocomposite films deposited by unbalanced magnetron sputtering

K. Kim, I. Park, I. Jo, 2013 .

Combustion synthesis of metal-matrix composites. Part 2: The Ti-Ti{sub x}Al{sub y}-Al{sub 2}O{sub 3} system

T. Strohaecker, A. Kunrath, J. Moore, 1996 .

The combustion synthesis of Ni-Ti shape memory alloys

Hu Chun Yi, John J. Moore, H. Yi, 1990 .

Structure and properties of dispersion-strengthened-with-nanosized particles refractory hard material TiC—Ni-alloy

E. Levashov, M. Fadeev, D. Shtansky, 2003 .

Combustion Synthesis of Composite Materials

J. Moore, 1992 .

On the possibility of tailoring a compositional gradient in thin films sputtered from a MoSi2 + XSiC composite target

B. Mishra, D. Olson, T. Ohno, 1996 .

Physical vapor deposition of molybdenum and silicon thin films

B. Mishra, D. Olson, John J. Moore, 1994 .

Development of a Si/C diffusion barrier layer based on the Mo-Si-C-N system

T. Ohno, S. Govindarajan, J. Disam, 1997 .

Characterization of hard chromium nitride coatings deposited by cathodic arc vapor deposition

B. Mishra, A. Perry, D. Olson, 1996 .

COMBUSTION SYNTHESIS OF CERAMIC AND METAL-MATRIX

H. Feng, J. Moore, K. Hunter, 2022 .

Self-Propagating High-Temperature Synthesis of Porous Nickel-Titanium

V. Ferguson, R. Ayers, J. Moore, 2007 .

Combustion Synthesis of Glass-Ceramic Composites Under Terrestrial and Reduced Gravity Conditions

John J. Moore, H. Yi, J. Guigné, 2001 .