Roland Stickler

发表

A new approach for the determination of stress intensity factors for finite width plate

D. L. Chen, Brigitte Weiss, Roland Stickler, 1994 .

A new evaluation procedure for crack closure

D. L. Chen, Brigitte Weiss, Roland Stickler, 1991 .

An improved expression of geometric correction factors for standard center cracked tension specimens

D. L. Chen, Brigitte Weiss, Roland Stickler, 1997 .

A new geometric correction factor for a finite width center cracked plate loaded by two pairs of splitting forces

D. L. Chen, Brigitte Weiss, Roland Stickler, 1993 .

Geometric correction factors determined by force balance method for center cracked specimens. IX Loaded by a portion of unsymmetric stresses on the crack

D. L. Chen, Brigitte Weiss, Roland Stickler, 1995 .

Numerical evaluation of stress distributions ahead of crack tip for finite-width center cracked specimens. IV. Loaded by a pair of splitting forces acting at an arbitrary location on the crack

D. L. Chen, Brigitte Weiss, Roland Stickler, 1996 .

Geometric correction factors determined by force balance method for center cracked specimens. VII. Loaded by uniformly distributed stresses acting on central portion of crack

D. L. Chen, Brigitte Weiss, Roland Stickler, 1994 .

Numerical assessment of stress distribution ahead of the crack tip for finite-width center cracked tension specimen

Herbert A. Mang, D. L. Chen, Brigitte Weiss, 1993 .

Geometric correction factors determined by force balance method for center cracked specimens VIII. Loaded by two parts of uniformly distributed stresses acting on the crack

D. L. Chen, Brigitte Weiss, Roland Stickler, 1994 .

Experimental K-calibration for corner cracks under bending loading

Brigitte Weiss, Roland Stickler, B. Weiss, 1995 .

NON‐DAMAGING NOTCHES IN FATIGUE*

Petr Lukáš, Brigitte Weiss, Roland Stickler, 1986 .

The electron channelling contrast technique applied to the characterisation of dislocation structures in the vicinity of a fatigue crack

Brigitte Weiss, Roland Stickler, D. L. Chen, 1997 .

HIGH CYCLE FATIGUE AND THRESHOLD BEHAVIOUR OF POWDER METALLURGICAL Mo AND Mo‐ALLOYS

Brigitte Weiss, Roland Stickler, B. Weiss, 1979 .

Phase instabilities during high temperature exposure of 316 austenitic stainless steel

Brigitte Weiss, Roland Stickler, B. Weiss, 1972 .

Characterization of mechanical and thermal properties of thin Cu foils and wires

Golta Khatibi, Bernhard G. Zagar, Brigitte Weiss, 2002 .

NOTCH SIZE EFFECT IN FATIGUE

Petr Lukáš, Brigitte Weiss, Roland Stickler, 1989 .

Contribution of the cyclic loading portion below the opening load to fatigue crack growth

Brigitte Weiss, Roland Stickler, D. L. Chen, 1996 .

A model for crack closure

Brigitte Weiss, Roland Stickler, D. L. Chen, 1996 .