Xizhong An

发表

Numerical Investigation on the Design and Optimization of Stacking Pattern for High Flexural Performance Carbon Fiber Reinforced Resin Matrix Composites

Hao Zhang, H. Fu, Xiaohong Yang, 2022, Fibers and Polymers.

Numerical investigation on fluidization characteristics of binary particles in supercritical water fluidized bed reactor under pulsed conditions

Hao Zhang, Xinglian Ye, Yang Wang, 2022, Powder Technology.

Insights into surface chemistry induced powder layer characteristic evolutions in additive manufacturing

Shujun Li, Hao Zhang, H. Fu, 2022, Powder Technology.

3D particulate-scale numerical investigation on hot isostatic pressing of W-Cu composites

Meng Li, Q. Qian, H. Fu, 2022, Powder Technology.

Composition regulation of composite materials in laser powder bed fusion additive manufacturing

Ting Zhao, Hao Zhang, H. Fu, 2022, Powder Technology.

CFD-DEM Investigation on Effects of Fiber Deformation during 3D Printing Process Based on Fused Deposition

Shengqiang Jiang, Dongmin Yang, Jiang Wu, 2023, Industrial & Engineering Chemistry Research.

Fibre bridging and nozzle clogging in 3D printing of discontinuous carbon fibre-reinforced polymer composites: coupled CFD-DEM modelling

Dongmin Yang, Jiang Wu, Haoqi Zhang, 2021, The International Journal of Advanced Manufacturing Technology.

Deformation Behavior and Mechanical Properties of Rolled Carbon Fiber Reinforced Al-Matrix Composites Via Protection with Sn Layer

Da-lin Wu, Qingchuan Zou, C. Xu, 2023, SSRN Electronic Journal.

Thermal behavior and control during multi-track laser powder bed fusion of 316 L stainless steel

Ju Wang, Ju Wang, Yuhang Wu, 2023, Additive Manufacturing.

Electronic structure study of growth species adsorption and reaction on cluster models for the diamond surface using LDA method

Shengxin Liu, Guoquan Liu, Xizhong An, 2003 .

Hierarchical effects of multi-layer powder spreading in the electron beam powder bed fusion additive manufacturing of pure tungsten material

Meng Li, Jian Wang, W. Hou, 2022, Additive Manufacturing.

Mixing characteristics and flow behaviors of different shaped tetrahedra in a rotary drum: A numerical study

Meng Li, Xizhong An, 2023, Powder Technology.

Numerical Investigations on the Flow Behaviors, Characteristics, and Mechanisms for Different Platonic Solids during Mixing in a Rotating Drum

Meng Li, Xizhong An, 2023, Industrial & Engineering Chemistry Research.

Segregation behavior of particles with Gaussian distributions in the rotating drum with rolling regime

Meng Li, Xizhong An, Yuhang Wu, 2023, Advanced Powder Technology.

The essential role of initial powder bed state in selective laser melting of 316 L stainless steel

Hao Zhang, H. Fu, Xiaohong Yang, 2023, International Journal of Heat and Mass Transfer.

CFD-DEM study on fluidization characteristics of gas-solid fluidized bed reactor containing ternary mixture

Hao Zhang, Xinglian Ye, Xizhong An, 2022, Powder Technology.

Numerical investigation on flow characteristics in a novel desulfurization reactor with structure optimization

Ling Jin, Gong-Yang Li, Hao Zhang, 2022, Powder Technology.

Fabrication of W-20Cu composite with optimization of particle packing in PM route

Meng Li, J. Jie, Qingchuan Zou, 2022, Journal of Materials Research and Technology.

Native oxide film powered corrosion protection of underlying Pb-free Sn solder substrate

Qingchuan Zou, Xizhong An, Chuang Qiao, 2023, Corrosion Science.

Material selection in making electrochemical impedance spectroscopy sensor for electrolyte thickness measurement in marine atmosphere

W. Ke, Xueyuan Zhang, Meng Sun, 2023, Corrosion Science.

Research on improving the spreadability of viscous powder in additive manufacturing

Hao Zhang, H. Fu, Xiaohong Yang, 2022, Powder Technology.

Damage behaviors of plain-woven fiber reinforced composites with different orientations: From mesoscopic evolution to macroscopic performance prediction

Qingchuan Zou, Yao Cai, Xizhong An, 2023, Composite Structures.

DEM modelling and analysis of the mixing characteristics of sphere-cylinder granular mixture in a rotating drum

Meng Li, Yongli Wu, D. Gou, 2023, Powder Technology.

PR-DNS investigation on momentum and heat transfer of two interactive non-spherical particles in a fluid

Hao Zhang, Yang Wang, Xizhong An, 2023, Powder Technology.

Deformation behavior and mechanical properties of rolled carbon fiber reinforced Al-matrix composites via protection with Sn layer

J. Jie, Da-lin Wu, Qingchuan Zou, 2023, Journal of Materials Processing Technology.

Numerical prediction on minimum fluidization velocity of a supercritical water fluidized bed reactor: Effect of particle shape

Hao Zhang, Xinglian Ye, Xizhong An, 2022, Powder Technology.

Cumulative effects of powder beds and melted areas on pore defects in electron beam powder bed fusion of tungsten

Ju Wang, Xizhong An, Dengzhi Yao, 2024, Powder Technology.

DEM-CFD investigation on the blast furnace raceway characteristics: Heat/mass transfer, dynamics and mechanisms

Hao Zhang, Xizhong An, Chao Li, 2024, Powder Technology.

CFD-DEM study on the synergistic effect of coke consumption and particle dynamics in the blast furnace raceway

Lihua Gao, Xizhong An, Peng Han, 2023, Particuology.

Improved design of available atmospheric corrosion monitoring sensor with a higher sensitivity to low NaCl deposition

Lijuan Feng, Xizhong An, Lianfeng Shen, 2022, Materials Letters.

Numerical investigation on the densification of granulated porous indium tin oxide powders before compaction

G. Zhu, Xizhong An, Chuanning Jiang, 2024, Powder Technology.

Numerical prediction on frictional characteristics of binary mixtures consisting of flexible cylindrical particles and rigid spheres

Hao Zhang, Xizhong An, Yanping Zhu, 2024, Powder Technology.