Mohammed Dahane

发表

Process Plan Generation in Reconfigurable Manufacturing Systems using AMOSA and TOPSIS

Abderrahmane Bensmaine, Mohammed Dahane, Lyes Benyoucef, 2012 .

AMOSA Based Approach for Process Plan Generation in Reconfigurable Manufacturing System with Machine Load Balancing

Abderrahmane Bensmaine, Mohammed Dahane, Lyès Benyoucef, 2013, 2013 IEEE International Conference on Systems, Man, and Cybernetics.

Joint maintenance and production planning optimization model for production systems with operation-dependent failure rate

El-Houssaine Aghezzaf, Mohammed Dahane, Daoud Ait-Kadi, 2014 .

A new efficient hybrid approach for reliability-based design optimization problems

Mohammed Dahane, Hammoudi Abderazek, Ferhat Hamza, 2020, Engineering with Computers.

Preventive remanufacturing planning of production equipment under operational and imperfect maintenance constraints: A hybrid genetic algorithm based approach

Mohammed Dahane, Zaki Sari, Yassir Bensmain, 2019, Reliab. Eng. Syst. Saf..

New Heuristic for Setup Plan Generation and Multi Tool Modules Selection in Reconfigurable Manufacturing Systems

Mohammed Dahane, Muhammad Ameer, M. Dahane, 2020, 2020 7th International Conference on Control, Decision and Information Technologies (CoDIT).

Joint optimisation of spare parts demand and remanufacturing policy under condition-based maintenance for stochastic deteriorating manufacturing system

Nidhal Rezg, Mohammed Dahane, Hamza Boudhar, 2013 .

Production and Logistics Systems Optimization (PLSO)

Mohammed Dahane, Zaki Sari, Fayçal Belkaid, 2017 .

Contribution to the optimisation of products recovery and remanufacturing: a multiobjective non-dominated sorting genetic algorithm based hybrid approach

Mohammed Dahane, Latifa Belhocine, Mohammed Yagouni, 2019, 2019 IEEE International Conference on Systems, Man and Cybernetics (SMC).

OPTIMISATION OF SEQUENTIAL INSPECTION SCHEMA IN MULTI-COMPONENT DETERIORATING SYSTEM CONTEXT: HEURISTIC BASED APPROACH

Nidhal Rezg, Mohammed Dahane, Hamza Boudhar, 2014 .

Development of joint maintenance and production strategies in a subcontracting environment

Nidhal Rezg, Sofiene Dellagi, Mohammed Dahane, 2011 .

An Adapted NSGA-II Algorithm for a Reconfigurable Manufacturing System (RMS) Design Under Machines Reliability Constraints

Mohammed Dahane, Lyes Benyoucef, L. Benyoucef, 2016 .

Profitability conditions of subcontracting of a production unit under a joint maintenance and production policy

Nidhal Rezg, Mohammed Dahane, Christian Clémentz, 2009 .

Optimization of single outsourcer–single subcontractor outsourcing relationship under reliability and maintenance constraints

Mohammed Dahane, Nadia Kinza Mouss, Mohammed Haoues, 2019, Journal of Industrial Engineering International.

Exact and multi-objective evolutionary-based approaches for process plan generation in a reconfigurable manufacturing environment

Mohammed Dahane, Lyes Benyoucef, Hichem Haddou Benderbal, 2018 .

Flexibility-based multi-objective approach for machines selection in reconfigurable manufacturing system (RMS) design under unavailability constraints

Mohammed Dahane, Lyes Benyoucef, Hichem Haddou Benderbal, 2017, Int. J. Prod. Res..

Order/remanufacturing policy of spare part with recovery option for stochastic deteriorating system

Nidhal Rezg, Mohammed Dahane, Hamza Boudhar, 2013, 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation (ETFA).

Simulation-based NSGA-II approach for multi-unit process plans generation in reconfigurable manufacturing system

Abderrahmane Bensmaine, Mohammed Dahane, Lyès Benyoucef, 2011, ETFA2011.

Optimization of cooperative outsourcing between single-outsourcer multiple-subcontractors: a genetic algorithm based approach

Nidhal Rezg, Mohammed Dahane, Nadia Kinza Mouss, 2012 .

Optimization of single-manufacturer multiple-contractors outsourcing relationship in integrated approach of production, maintenance and quality

Nidhal Rezg, Mohammed Dahane, Nadia Kinza Mouss, 2013, 2013 IEEE International Conference on Systems, Man, and Cybernetics.

Sustainable capacitated facility location/network design problem: a Non-dominated Sorting Genetic Algorithm based multiobjective approach

Mohammed Dahane, Mustapha Anwar Brahami, M'hammed Sahnoun, 2020, Annals of Operations Research.

New dynamic heuristic for the optimization of opportunities to use new and remanufactured spare part in stochastic degradation context

Nidhal Rezg, Mohammed Dahane, Hamza Boudhar, 2017, J. Intell. Manuf..

A new robustness index formachines selection in Reconfigurable Manufacturing system

Mohammed Dahane, Lyes Benyoucef, Hichem Haddou Benderbal, 2015, 2015 International Conference on Industrial Engineering and Systems Management (IESM).

The Use of Metaheuristics for a Stochastic Supply Chain Design Problem’s Resolution –A Comparison Study–

Mohammed Dahane, Zaki Sari, Fouad Maliki, 2017 .

Subcontracting integration in a joint maintenance/production policy: study on profitability conditions

Nidhal Rezg, Mohammed Dahane, Christian Clémentz, 2011 .

Effects of extension of subcontracting on a production system in a joint maintenance and production context

Nidhal Rezg, Mohammed Dahane, Christian Clementz, 2010, Comput. Ind. Eng..

A new flexibility index for machines selection in Reconfigurable Manufacturing System design problem: Multi-objective approach

Mohammed Dahane, Lyes Benyoucef, Hichem Haddou Benderbal, 2015 .

Aggregate modeling of scheduling multiproduct pipeline system with constrains of multi-pumps

Mohammed Dahane, Souier Mehdi, Abdellaoui Wassila, 2019, 2019 International Conference on Applied Automation and Industrial Diagnostics (ICAAID).

Hybrid Heuristic to Minimize Machine’s Unavailability Impact on Reconfigurable Manufacturing System Using Reconfigurable Process Plan

Mohammed Dahane, Lyes Benyoucef, Hichem Haddou-Benderbal, 2016 .

A non-dominated sorting genetic algorithm based approach for optimal machines selection in reconfigurable manufacturing environment

Abderrahmane Bensmaine, Mohammed Dahane, Lyès Benyoucef, 2013, Comput. Ind. Eng..

Integration of subcontracting activity in a production planning for randomly failing manufacturing system: Feasibility and profitability conditions

Nidhal Rezg, Mohammed Dahane, N. Rezg, 2010, 2010 IEEE International Conference on Automation Science and Engineering.

Spare Part Returns in Stochastic Deteriorating Manufacturing System under a Condition-Based Maintenance Policy: Simulation-Based Genetic Algorithm Approach

Nidhal Rezg, Mohammed Dahane, Hamza Boudhar, 2013, MIM.

A location-allocation problem design with unavailabilities management

Mohammed Dahane, Zaki Sari, Mustapha Anwar Brahami, 2014 .

Special session — New approaches in systems reliability evaluation and maintenance optimization

El-Houssaine Aghezzaf, Abdelhakim Khatab, Mohammed Dahane, 2013 .

Integrated Optimisation of In-House Production and Outsourcing Strategy: Genetic Algorithm Based Approach

Nidhal Rezg, Mohammed Dahane, Nadia Kinza Mouss, 2013 .

Process plan generation in reconfigurable manufacturing systems using adapted NSGA-II and AMOSA

Abderrahmane Bensmaine, Mohammed Dahane, Lyes Benyoucef, 2011, 2011 9th IEEE International Conference on Industrial Informatics.

An NSGA-II-based multiobjective approach for real-time routing selection in a flexible manufacturing system under uncertainty and reliability constraints

Mohammed Dahane, Fouad Maliki, Mehdi Souier, 2018, The International Journal of Advanced Manufacturing Technology.

Economic model of outsourcing for a subcontractor manufacturing system in a single subcontractor - multi-outsourcers relationship

Nidhal Rezg, Mohammed Dahane, N. Rezg, 2011, 2011 IEEE International Conference on Automation Science and Engineering.

A hybrid multi-objective based approach for sustainable process plan generation in a reconfigurable manufacturing environment

Mohammed Dahane, Hichem Haddou Benderbal, Lyès Benyoucef, 2018, 2018 IEEE 16th International Conference on Industrial Informatics (INDIN).

Outsourcing optimization in two-echelon supply chain network under integrated production-maintenance constraints

Mohammed Dahane, Nadia Kinza Mouss, Mohammed Haoues, 2019, J. Intell. Manuf..

Multiobjective approach for deteriorating jobs scheduling for a sustainable manufacturing system

Mohammed Dahane, Mourad Boudhar, Meriem Tigane, 2018, The International Journal of Advanced Manufacturing Technology.

Impact of spare parts remanufacturing on the operation and maintenance performance of offshore wind turbines: a multi-agent approach

Mohammed Dahane, M'Hammed Sahnoun, David Baudry, 2017, J. Intell. Manuf..

Optimisation of preventive maintenance grouping strategy for multi-component series systems: Particle swarm based approach

Bouziane Beldjilali, Mohammed Dahane, Abdelkader Neki, 2016, Comput. Ind. Eng..

Performance and Usage Frequency Based Policy for Products Recovery and Remanufacturing

Mohammed Dahane, Latifa Belhocine, Mohammed Yagouni, 2020, 2020 7th International Conference on Control, Decision and Information Technologies (CoDIT).

Optimal production plan for a multi-products manufacturing system with production rate dependent failure rate

Nidhal Rezg, Anis Chelbi, Mohammed Dahane, 2012 .

Preemptive scheduling with transportation delays between machines

Mohammed Dahane, Mourad Boudhar, Ryma Zineb Badaoui, 2020 .

Modularity assessment in reconfigurable manufacturing system (RMS) design: an Archived Multi-Objective Simulated Annealing-based approach

Mohammed Dahane, Lyes Benyoucef, Hichem Haddou Benderbal, 2018 .

Impact of the delay of subcontracting in a context of integrated maintenance: analytical approach

Nidhal Rezg, Mohammed Dahane, Christian Clementz, 2007, 2007 IEEE Conference on Emerging Technologies and Factory Automation (EFTA 2007).

Layout evolution effort for product family in Reconfigurable Manufacturing System design

Mohammed Dahane, Lyes Benyoucef, Hichem Haddou-Benderbal, 2017 .

Analysis of joint maintenance and production policies under a subcontracting constraint

Nidhal Rezg, Mohammed Dahane, Christian Clémentz, 2008 .

A Simulation-Based Genetic Algorithm Approach for Process Plans Selection in Uncertain Reconfigurable Environment

Abderrahmane Bensmaine, Mohammed Dahane, Lyès Benyoucef, 2013, MIM.

Production planning in integrated maintenance context for multi-period multi-product failure-prone single-machine

Nidhal Rezg, Mohammed Dahane, Nadia Kinza Mouss, 2013, 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation (ETFA).

Exhaustive Search Based Heuristic for Solving Machine Layout Problem in Reconfigurable Manufacturing System Design

Mohammed Dahane, Lyes Benyoucef, Hichem Haddou Benderbal, 2018 .

Temporal problem of subcontracting of manufacturing unit under joint production control and maintenance policy

Nidhal Rezg, Mohammed Dahane, Christian Clementz, 2009, 2009 IEEE Conference on Emerging Technologies & Factory Automation.

Process Plan Generation in Reconfigurable Manufacturing System Composed of Multi-spindle and Modular Reconfigurable Machines

Mohammed Dahane, Muhammad Ameer, 2021, 2021 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM).

Optimal Production Planning for a Randomly Failing Production System with Dependence between the Production and Failure Rates

Nidhal Rezg, Anis Chelbi, Mohammed Dahane, 2009 .