Yuandong Peng

发表

Effect of reaction condition on microstructure and properties of (NiCuZn)Fe2O4 nanoparticles synthesized via co-precipitation with ultrasonic irradiation

C. Xia, Minghui Cui, Yuandong Peng, 2020, Ultrasonics Sonochemistry.

The effect of calcination temperature on microstructure and properties of FeNiMo@Al2O3 soft magnetic composites prepared by sol-gel method

C. Xia, Yuandong Peng, Zhixin Yao, 2020, Journal of Alloys and Compounds.

Iron-based soft magnetic composites with Al2O3 insulation coating produced using sol–gel method

Liya Li, J. Yi, J. Nie, 2016 .

Effect of the addition of Al2O3 nanoparticles on the magnetic properties of Fe soft magnetic composites

Yang Cao, J. Nie, Wen Jun Zhang, 2016 .

Influence of Heat Treatment Processing on the Magnetic Properties of Fe-3.5Si Soft Magnetic Composites in Material Application

Yuandong Peng, Z. Sun, J. Nie, 2012 .

Effects of microwave sintering temperature and soaking time on microstructure of WC–8Co

R. Bao, J. Yi, Yuandong Peng, 2013 .

Fe-based soft magnetic composites coated with NiZn ferrite prepared by a co-precipitation method

Liya Li, Yi Yi, Xiaoxu Wang, 2017 .

Decarburization and improvement of ultra fine straight WC–8Co sintered via microwave sintering

R. Bao, J. Yi, Yuandong Peng, 2012 .

Fabrication of W-Cu composites by microwave infiltration

S. Luo, J. Yi, Chengshang Zhou, 2010 .

Effect of heating rate on the microwave sintered W–Ni–Fe heavy alloys

S. Luo, Liya Li, J. Yi, 2009 .

The magnetic properties and microstructure of phosphated amorphous FeSiCr/silane soft magnetic composite

Yuandong Peng, Hui Deng, C. Xia, 2019, Journal of Magnetism and Magnetic Materials.

Microwave Synthesis and Characterizations of Ni0.5Zn0.5Fe2O4 Ferrite Powder

R. Bao, J. Yi, J. Ran, 2013 .

Consolidation and microstructures of microwave sintered W-25Cu alloys with Fe addition

S. Luo, Liya Li, J. Yi, 2010 .

A research on WC–8Co preparation by microwave sintering

R. Bao, J. Yi, Yuandong Peng, 2012 .

Microwave direct synthesis of MgB2 superconductor

S. Luo, Liya Li, J. Yi, 2008 .

Microstructure analysis of microwave sintered ferrous PM alloys

S. Luo, Liya Li, J. Yi, 2009 .

Observation of ferromagnetism in black phosphorus nanosheets with high magnetization by liquid exfoliation

Yaozhuang Nie, Q. Xia, G. Guo, 2018, Solid State Communications.

Anisotropic nanocrystalline SmCo4.8Cr0.12C0.08 permanent magnets fabricated using melt-spinning method

Liya Li, Yicheng Ge, Wei Zhang, 2017 .

Effects of Cr3C2 content and wheel speed on amorphization behavior of melt-spun SmCo7-x(Cr3C2)x alloys

Liya Li, J. Yi, Q. Xia, 2012 .

Microstructure and Magnetic Properties of Rapidly Solidified Sm(CobalFe0.11Cu0.10Zrx)7 Alloys

Yicheng Ge, Yuandong Peng, L. Li, 2014 .

Crystallization and Magnetic Properties of Melt-Spun SmCo7-x(Cr3C2)x Alloys

Jian Hong Yi, Li Ya Li, Yuan Dong Peng, 2013 .

Novel exchange-coupled SmFe3/α-Fe nanocomposite magnets fabricated by magnetic annealing

Liya Li, J. Yi, A. Yan, 2015 .

Fracture Toughness and Magnetic Properties of Sm2Co17-Based Magnets

Li Ya Li, J. Yi, Ai Kun Li, 2013 .

Magnetic Properties and Microstructure of Sm2Co17-Based High Temperature Permanent Magnet

J. Yi, Yuandong Peng, L. Li, 2007 .

A novel approach for fabrication of functionally graded W/Cu composites via microwave processing

Liya Li, J. Yi, Yuandong Peng, 2018 .

Effect of Processing Condition on Microstructure and Properties of FeSiAl Powder Coated with Metal Oxides by Using a NaOH Solution

Yifan Zhao, Yuandong Peng, Xuwu Yi, 2021, Journal of Superconductivity and Novel Magnetism.

Influence of heat treatment on microstructures and magnetic properties of Fe-based soft magnetic composites prepared by co-precipitation method

J. Nie, Xin-Ji Ke, C. Xia, 2019, Journal of Magnetism and Magnetic Materials.

Microstructure and magnetic properties of FeSiAl soft magnetic composites prepared by chemical in-situ coprecipitation with NaOH

C. Xia, Yuandong Peng, Zhixin Yao, 2021, Materials Chemistry and Physics.

Effects of heat treatment on structure and magnetic properties of Fe/(NiZn)Fe2O4 soft magnetic composite powders prepared using a co-precipitation method

Yuantao Xiang, Hui Deng, C. Xia, 2017 .

Preparation of soft magnetic composites for Fe particles coated with (NiZn)Fe2O4 via microwave treatment

Yang Cao, Yuandong Peng, J. Nie, 2015 .

Effects of warm compaction on mechanical properties of sintered P/M steels

J. Yi, Q. Xia, Yuandong Peng, 2007 .

Die wall lubricated warm compaction behavior of non-lubricant admixed iron powders

Liya Li, J. Yi, Q. Xia, 2005 .

Influence of Calcination Temperature on Microstructure and Properties of (NiCuZn)Fe2O4 Ferrite Prepared via Ultrasonic-Assisted Co-Precipitation

C. Xia, Minghui Cui, Yuandong Peng, 2021, Journal of Superconductivity and Novel Magnetism.

Microstructure and properties of amorphous FeSiCrBC soft magnetic composites prepared by using HNO3 solution

Yifan Zhao, Yuandong Peng, S. Zheng, 2023, Journal of Materials Science: Materials in Electronics.

Improved magnetic properties of FeSiCr amorphous soft magnetic composites by adding carbonyl iron powder

C. Xia, Y. Zhu, Geng Hu, 2021 .

Microstructure and Magnetic Properties of Microwave Sintered Ni0.5Zn0.5Fe2O4 Ferrite

J. Yi, M. Lou, Q. Xia, 2013 .

The effect of compound addition Dy2O3 and Sn on the structure and properties of NdFeNbB magnets

Bai-yun Huang, Liya Li, J. Yi, 2007 .

Structure and properties of MnZn ferrite nanoparticles synthesized via sol–gel autocombustion method

Liya Li, J. Yi, Haowen Ren, 2015, Journal of Materials Science: Materials in Electronics.

W-Ni-Fe 高密度合金的微波烧结. Microwave sintering of W-Ni-Fe heavy alloys

S. Luo, J. Yi, Chengshang Zhou, 2009 .

Warm compaction process of P/M Steels by orthogonal testing method

J. Yi, Q. Xia, Yuandong Peng, 2008 .

First Principles Investigation of Electronic Structure, Chemical Bonding, Elastic and Optical Properties of Novel Rhenium Nitrides

R. Bao, J. Yi, Q. Xia, 2012 .

First-principles investigations of the band structure and optical properties of γ-boron

J. Yi, Chengshang Zhou, Q. Xia, 2010 .