C. K. Kim

发表

Enhancement of the Meltdown Temperature of a Lithium Ion Battery Separator via a Nanocomposite Coating

S. H. Yoo, C. K. Kim, S. Yoo, 2009 .

Fabrication of polyethylene microporous membranes using triethylolpropane tris(2-ethylhexanoate) as a novel diluent by a thermally induced phase separation process

Minjoon Park, C. K. Kim, 2014 .

Antibacterial and Hydrophilic Characteristics of Poly(ether sulfone) Composite Membranes Containing Zinc Oxide Nanoparticles Grafted with Hydrophilic Polymers

N. Choi, E. Choi, Y. Jo, 2016 .

Fabrication and characterization of a novel polyethersulfone/aminated polyethersulfone ultrafiltration membrane assembled with zinc oxide nanoparticles

Sung Won Kim, E. Choi, Y. Jo, 2016 .

Changes in microporous structure of polyethylene membrane fabricated from PE/PTMG/paraffin ternary mixtures

S. H. Yoo, S. C. Roh, C. K. Kim, 2012 .

Control of droplet size of polymer-diluent blends through thermally induced phase separation

K. Char, W. Kim, C. K. Kim, 2000 .

Electrocatalytic activity of nitrogen-doped holey carbon nanotubes in oxygen reduction and evolution reactions and their application in rechargeable zinc–air batteries

E. Choi, Seung Youn Lee, Dong Eun Kim, 2020 .

Size control of silica nanoparticles and their surface treatment for fabrication of dental nanocomposites.

J. W. Kim, C. K. Kim, L. U. Kim, 2007, Biomacromolecules.

Composite membranes prepared from poly(m-animostyrene-co-vinyl alcohol) copolymers for the reverse osmosis process

C. Kim, Jong-Gyu Kim, E. Moon, 2003 .

Changes in the interfacial properties of PC/SAN blends with compatibilizer

Jooheon Kim, C. K. Kim, 2003 .

Changes in Gas-Transport Properties with the Phase Structure of Blends Containing Styrene−Butadiene−Styrene Triblock Copolymer and Poly(2,6-dimethyl-1,4-phenylene oxide)

K. W. Song, C. K. Kim, K. Ka, 2010 .

Characterization of ternary blends containing polycarbonate, tetramethyl polycarbonate, and poly (ε-caprolactone)

D. R. Paul, C. K. Kim, 1994 .

Interaction parameters for blends containing polycarbonates: 1. Tetramethyl bisphenol-A polycarbonate/polystyrene

D. R. Paul, C. K. Kim, 1992 .

Control of phase separation behavior of PC/PMMA blends and their application to the gas separation membranes

Jongkee Kim, J. Won, Y. Kang, 1999 .

Characteristics of novel dental composites containing 2,2-bis[4-(2-methoxy-3-methacryloyloxy propoxy) phenyl] propane as a base resin.

J. W. Kim, B. Cho, C. K. Kim, 2006, Biomacromolecules.

Dental restorative composites containing 2,2-bis-[4-(2-hydroxy-3-methacryloyloxy propoxy) phenyl] propane derivatives and spiro orthocarbonates.

J. Y. Lee, E. Moon, B. Cho, 2005, Journal of biomedical materials research. Part B, Applied biomaterials.

Fabrication of membranes for the liquid separation: Part 1. Ultrafiltration membranes prepared from novel miscible blends of polysulfone and poly(1-vinylpyrrolidone-co-acrylonitrile) copolymers

C. Kim, Jong-Gyu Kim, M. Kang, 2005 .

Novel ultrafiltration membranes prepared from the new miscible blends of polysulfone with poly(1-vinylpyrrolidone-co-styrene) copolymers

Jooheon Kim, Yang Kim, J. E. Yoo, 2003 .

The effects of diluent molecular weight on the structure of thermally-induced phase separation membrane

K. Char, Sung Soo Kim, Jae-Jin Kim, 1995 .

Characteristics of ultrafiltration membranes fabricated from polysulfone and polymer-grafted silica nanoparticles: Effects of the particle size and grafted polymer on the membrane performance

Junseok Lee, Y. Jo, C. K. Kim, 2014 .

Effects of membrane hydrophilicity on the removal of a trihalomethane via micellar-enhanced ultrafiltration process

Y. Chung, C. K. Kim, S. Yoo, 2009 .

Fabrication of membranes for the liquid separation: Part 2: Microfiltration membranes prepared from immiscible blends containing polysulfone and poly(1-vinylpyrrolidone-co-acrylonitrile) copolymers

C. Kim, E. Moon, J. W. Kim, 2006 .

The changes of membrane performance with polyamide molecular structure in the reverse osmosis process

Jong-Gyu Kim, C. K. Kim, I. J. Roh, 2000 .

Performance of negatively charged nanofiltration membranes prepared from mixtures of various dimethacrylates and methacrylic acid

S. H. Yoo, C. Kim, M. Jeon, 2008 .

Effects of molecular structure of the resins on the volumetric shrinkage and the mechanical strength of dental restorative composites.

J. W. Kim, C. K. Kim, L. U. Kim, 2006, Biomacromolecules.

Dynamic mechanical and gas transport properties of blends and random copolymers of bisphenol‐A polycarbonate and tetramethyl bisphenol‐A polycarbonate

D. R. Paul, M. Aguilar-Vega, C. K. Kim, 1992 .

Nucleophilic substitution at the imidoyl carbon atom: intermediate mechanistic and reactivity behavior between carbonyl and vinyl carbon substitution.

H. Li, S. Rhee, B. S. Lee, 2001, Journal of the American Chemical Society.

Fabrication and properties of polycarbonate composites with polycarbonate grafted multi-walled carbon nanotubes by reactive extrusion

Ji yeong Kim, E. Choi, C. Kim, 2015 .

Coupled relaxations in a blend of PMMA and a polycarbonate

Yang Liu, D. R. Paul, P. T. Inglefield, 1994 .

Phase stability of ternary blends

D. R. Paul, Jae-Jin Kim, C. K. Kim, 1994 .

Fabrication and properties of ultrafiltration membranes composed of polysulfone and poly(1-vinylpyrrolidone) grafted silica nanoparticles

C. K. Kim, H. J. Song, 2013 .

Re-examination of poly(methyl methacrylate)/poly(epichlorohydrin) blends by small angle neutron scattering and differential scanning calorimetry

D. R. Paul, J. Higgins, J. N. Clark, 1992 .

Removal of aromatic compounds in the aqueous solution via micellar enhanced ultrafiltration: Part 1. Behavior of nonionic surfactants

Su-mi Kim, C. K. Kim, Joohwan Lim, 1998 .

Interaction parameters for blends containing polycarbonates: 3. Polycarbonate copolymers/styrene-based copolymers

D. R. Paul, C. K. Kim, 1992 .

Polycarbonate/acrylonitrile–styrene–acrylic elastomer terpolymer blends with enhanced interfacial adhesion and surface gloss

J. Keum, Jooheon Kim, Y. Seo, 2005 .

Miscibility of polysulfone blends with poly(1‐vinylpyrrolidone‐co‐styrene) copolymers and their interaction energies

Jooheon Kim, C. K. Kim, S. Seo, 2003 .

Ultrafiltration membranes prepared from blends of polyethersulfone and poly(1-vinylpyrrolidone-co-styrene) copolymers

C. Kim, Jonghwa Kim, C. K. Kim, 2005 .

Hybridization Effects of Nitrogen-Doped Graphene–Carbon Nanotubes and Nano-Onion Carbons on the Electrocatalytic Activity of the Oxygen Reduction Reaction

S. Lee, E. Choi, C. Kim, 2018 .

A novel method for the pore size control of the battery separator using the phase instability of the ternary mixtures

C. K. Kim, L. U. Kim, 2006 .

Effects of Nonsolvent Molecular Structure and Its Content on the Formation of the Macroporous Polyarylate Layer Coated onto the Polyethylene Separator

C. Kim, S. C. Roh, K. W. Song, 2011 .

Interaction parameters for blends containing polycarbonates: 2. Tetramethyl bisphenol A polycarbonate-styrene copolymers

D. R. Paul, C. K. Kim, 1992 .

Miscibility of poly(methyl methacrylate) blends with halogen-containing polycarbonates and copolymers

D. R. Paul, C. K. Kim, 1992 .

Fabrication and Properties of Nanofiltration Membranes Assembled with Chitosan on Poly(Ether Sulfone) Membranes Surface-Functionalized with Acyl Chloride Groups

S. Lee, E. Choi, C. K. Kim, 2019, Industrial & Engineering Chemistry Research.

Noncovalent functionalization of multi-walled carbon nanotubes with hydroxyl group-containing pyrene derivatives for their composites with polycarbonate

E. Choi, L. Choi, C. Kim, 2015 .

In situ grafting of polybutylene terephthalate onto multi-walled carbon nanotubes by melt extrusion, and characteristics of their composites with polybutylene terephthalate

Sung Won Kim, E. Choi, C. K. Kim, 2016 .

Fabrication of carbon fiber grafted with acyl chloride functionalized multi-walled carbon nanotubes for mechanical reinforcement of nylon 6,6

E. Choi, C. Kim, M. H. Kim, 2019, Composites Science and Technology.

Phase behavior of polymer/diluent/diluent mixtures and their application to control microporous membrane structure

M. Jeon, C. K. Kim, 2007 .

Noncovalent functionalization of multi-walled carbon nanotubes with pyrene-linked nylon66 for high performance nylon66/multi-walled carbon nanotube composites

S. C. Roh, C. Kim, E. Y. Choi, 2014 .

Characterization of the surface energies of functionalized multi-walled carbon nanotubes and their interfacial adhesion energies with various polymers

Yeon Sik Choi, S. C. Roh, E. Y. Choi, 2014 .

Reactivity estimation of polybutylene terephthalate with noncovalently functionalized multiwalled carbon nanotubes and reactivity effect on the composite reinforcement

Chul B. Park, E. Choi, M. H. Kim, 2021 .

Effects of molecular weight distribution on the spinodal temperature of polymer mixtures

Jaetaek Kim, C. K. Kim, Yu-Yon Kim, 2004 .

Fabrication of nitrogen-doped nano-onions and their electrocatalytic activity toward the oxygen reduction reaction

Chang Keun Kim, E. Choi, C. K. Kim, 2017, Scientific Reports.

Gas transport and thermodynamic properties of PMMA/PVME blends containing PS-b-PMMA as a compatibilizer

H. W. Choi, E. Moon, J. E. Yoo, 2002 .

Performance changes of composite membranes prepared from various glycidyl methacrylate derivatives and their mixtures

C. Kim, Kwisung Park, M. Jeon, 2008 .

Composite membranes prepared from 2,2-bis[4-(2-hydroxy-3-methacryloyloxy propoxy)phenyl]propane derivatives and their mixtures for the reverse osmosis

C. Kim, E. Moon, Y. Seo, 2004 .

Novel composite membranes prepared from 2,2 bis [4-(2-hydroxy-3-methacryloyloxy propoxy) phenyl] propane, triethylene glycol dimethacrylate, and their mixtures for the reverse osmosis process

C. Kim, E. Moon, Y. Seo, 2004 .

Enhancement of Meltdown Temperature of the Polyethylene Lithium-Ion Battery Separator via Surface Coating with Polymers Having High Thermal Resistance

Y. Chung, S. H. Yoo, C. Kim, 2009 .

Effects of the polyamide molecular structure on the performance of reverse osmosis membranes

C. K. Kim, I. J. Roh, Sun-Hyun Park, 1998 .

Miscibility of polycarbonates with copolymers containing cyclohexylmethacrylate

Jae Wook Lee, Jongkee Kim, Dabin Park, 2001 .

Coating with macroporous polyarylate via a nonsolvent induced phase separation process for enhancement of polyethylene separator thermal stability

K. W. Song, C. K. Kim, 2010 .

Effects of the Phase Behavior of the Diluent Mixture on the Microstructure of Polyethylene Membranes Formed by Thermally Induced Phase Separation Process

C. Kim, M. Park, S. Noh, 2013 .

Structural and luminescent characteristics of two-step processed BaAl2−xSixO4−xNx:Eu2+ phosphors

G. Anoop, J. Yoo, I. H. Cho, 2013 .

Effects of polycarbonate molecular structure on the miscibility with other polymers

D. R. Paul, C. K. Kim, C. K. Kim, 1992 .