W. E. ten Napel

发表

Discussion: “Non-Newtonian Fluid Model Incorporated Into Elastohydrodynamic Lubrication of Rectangular Contacts” (Jacobson, B. O., and Hamrock, B. J., 1984, ASME, J. Tribol., 106, pp. 275–282)

W. E. ten Napel, 1984 .

Closure to “Discussion of ‘Multigrid, An Alternative Method for Calculating Film Thickness and Pressure Profiles in Elastohydrodynamically Lubricated Line Contacts’” (1986, ASME J. Tribol., 108, p. 556)

R. Bosma, W. E. ten Napel, Antonius Lubrecht, 1986 .

Measurements of film thickness and friction in cold rolling

W. E. ten Napel, R. S. Cuperus, W. H. Neumann, 1998 .

Elastohydrodynamics in counterformal and conformal contacts

W. E. ten Napel, 1994 .

The Influence of Longitudinal and Transverse Roughness on the Elastohydrodynamic Lubrication of Circular Contacts

R. Bosma, W. E. ten Napel, Antonius Lubrecht, 1988 .

Paper II(iii) – Lubrication of small end bearings in supercharged two-stroke diesel engines

R. Bosma, W. E. ten Napel, M. Akker, 1993 .

Paper VI(i) Solving Reynolds' equation for E.H.L. line contacts by application of a multigrid method

H. Moes, R. Bosma, W. E. ten Napel, 1987 .

Numerical simulation of the overrolling of a surface feature in an EHL line contact

W. E. ten Napel, Antonius Lubrecht, Cornelis H. Venner, 1991 .

Film Thickness Calculations in Elastohydrodynamically Lubricated Circular Contacts, Using a Multigrid Method

R. Bosma, W. E. ten Napel, Antonius Lubrecht, 1987 .

Multigrid, An Alternative Method for Calculating Film Thickness and Pressure Profiles in Elastohydrodynamically Lubricated Line Contacts

R. Bosma, W. E. ten Napel, Antonius Lubrecht, 1986 .

Sinusoidal three-lobe bearings-optimization and stability charts

R. Bosma, W. E. ten Napel, 1980 .

Closure to “Discussion of ‘Multigrid, an Alternative Method of Solution for Two-Dimensional Elastohydrodynamically Lubricated Point Contact Calculations’” (1988, ASME J. Tribol., 110, p. 188)

R. Bosma, W. E. ten Napel, Antonius Lubrecht, 1988 .

Closure to “Discussion of ‘Advanced Multilevel Solution of the EHL Line Contact Problem’” (1990, ASME J. Tribol., 112, p. 432)

R. Bosma, W. E. ten Napel, Cornelis H. Venner, 1990 .

Closure to “Discussion of ‘Film Thickness Calculations in Elastohydrodynamically Lubricated Circular Contacts, Using a Multigrid Method’” (1988, ASME J. Tribol., 110, p. 507)

R. Bosma, W. E. ten Napel, Antonius Lubrecht, 1988 .

Discussion: “Nondimensional Presentation of Frictional Tractions in Elastohydrodynamic Lubrication—Part I: Fully Flooded Conditions” (Archard, J. F., and Baglin, K. P., 1975, ASME J. Lubr. Technol., 97, pp. 398–410)

H. Moes, R. Bosma, W. E. ten Napel, 1975 .

Multigrid, an Alternative Method of Solution for Two-Dimensional Elastohydrodynamically Lubricated Point Contact Calculations

R. Bosma, W. E. ten Napel, Antonius Lubrecht, 1987 .

Discussion: “Theoretical and Experimental Determination of the Dynamic Characteristics of a Hydrodynamic Journal Bearing” (Parkins, D. W., 1979, ASME J. Lubr. Technol., 101, pp. 129–137)

R. Bosma, W. E. ten Napel, 1979 .

Dynamically Loaded Pivoted Pad Journal Bearings: Mobility Method of Solution

H. Moes, R. Bosma, W. E. ten Napel, 1976 .

Surface roughness effects in an EHL line contact

W. E. ten Napel, Cornelis H. Venner, C. Venner, 1992 .

Lubrication in cold rolling: Elasto-plasto-hydrodynamic lubrication

W. E. ten Napel, A. W. Wemekamp, P. van Liempt, 1993 .

Advanced Multilevel Solution of the EHL Line Contact Problem

R. Bosma, W. E. ten Napel, Cornelis H. Venner, 1990 .

The Influence of Elastic Deformation of the Roll and the Sheet in a Hydrodynamically Lubricated Cold Rolling Process

W. E. ten Napel, P. M. Lugt, 1995 .

Multilevel solution of the elastohydrodynamically lubricated circular contact problem part 2: Smooth surface results

W. E. ten Napel, Cornelis H. Venner, C. Venner, 1992 .

Multilevel solution of the elastohydrodynamically lubricated circular contact problem Part I: Theory and numerical algorithm

W. E. ten Napel, Cornelis H. Venner, C. Venner, 1992 .