Y. Shi

发表

Critical-current density of melt-grown single-grain Y–Ba–Cu–O disks determined by ac susceptibility measurements

C. Navau, D. Cardwell, A. Sanchez, 2008 .

Enhanced trapped field performance of bulk high-temperature superconductors using split coil, pulsed field magnetization with an iron yoke

D. Cardwell, M. Ainslie, A. Dennis, 2016 .

A trapped field of 17.6 T in melt-processed, bulk Gd-Ba-Cu-O reinforced with shrink-fit steel

Mark D. Ainslie, David A. Cardwell, Yunhua Shi, 2014, 1406.0686.

Pulsed-field magnetisation of Y-Ba-Cu-O bulk superconductors fabricated by the infiltration growth technique

D. Cardwell, M. Ainslie, J. Durrell, 2020, Superconductor Science and Technology.

Microstructural evolution in multiseeded YBCO bulk samples grown by the TSMG process

A. Goodfellow, S. Speller, D. Cardwell, 2016 .

Numerical simulation and analysis of single grain YBCO processed from graded precursor powders

Wei Zhai, W. Zhai, Yunhua Shi, 2015 .

Development of non-weak link bulk YBCO grain boundaries for high magnetic field engineering applications

D. Cardwell, W. Lo, S. Lloyd, 1999, IEEE Transactions on Applied Superconductivity.

The effect of nano-size ZrO2 powder addition on the microstructure and superconducting properties of single-domain Y–Ba–Cu–O bulk superconductors

D. Cardwell, E. S. Reddy, N. H. Babu, 2005 .

Modelling and comparison of trapped fields in (RE)BCO bulk superconductors for activation using pulsed field magnetization

Jin Zou, Mark D. Ainslie, David A. Cardwell, 2014 .

Axial and radial ac susceptibility measurements on melt-processed single-grain Y–Ba–Cu–O discs

C. Navau, D. Cardwell, A. Sanchez, 2010 .

A new seeding technique for the reliable fabrication of large, SmBCO single grains containing silver using top seeded melt growth

D. Cardwell, A. Dennis, Y. Shi, 2014, 1410.7973.

Bulk YBCO seeded with 45°–45° bridge-seeds of different lengths

D. Cardwell, A. Dennis, J. Durrell, 2012 .

The effect of the addition of zirconium-containing compounds on the microstructure and superconducting properties of mono-domain Y–Ba–Cu–O bulk superconductors

K. Iida, D. Cardwell, N. H. Babu, 2005 .

Influence of soft ferromagnetic sections on the magnetic flux density profile of a large grain, bulk Y–Ba–Cu–O superconductor

P. Vanderbemden, Yunhua Shi, D. Cardwell, 2015 .

Pulsed field magnetization of 0°–0° and 45°–45° bridge-seeded Y–Ba–Cu–O bulk superconductors

Jin Zou, Mark D. Ainslie, David A. Cardwell, 2015 .

Transport $J_{{c}}$ in Bulk Superconductors: A Practical Approach?

D. Cardwell, A. Dennis, J. Durrell, 2016, IEEE Transactions on Applied Superconductivity.

Alternating-current susceptibility and critical-current density of melt-processed Gd–Ba–Cu–O–Ag single grains: effect of intrinsic edge pinning

C. Navau, D. Cardwell, A. Sanchez, 2011 .

Properties of grain boundaries in bulk, melt processed Y–Ba–Cu–O fabricated using bridge-shaped seeds

D. Cardwell, A. Dennis, J. Durrell, 2012 .

A trapped field of 17.6 T in melt-processed, bulk Gd-Ba-Cu-O reinforced with shrink-fit steel

J. Hull, M. Strasik, A. Campbell, 2014, 1406.0686.

Flux jump-assisted pulsed field magnetisation of high-Jc bulk high-temperature superconductors

Mark D. Ainslie, Yunhua Shi, John H. Durrell, 2016 .

Portable, desktop high-field magnet systems using bulk, single-grain RE–Ba–Cu–O high-temperature superconductors

D. Cardwell, M. Ainslie, A. Dennis, 2022, Superconductor Science and Technology.