Satoshi Igi

发表

Development of Advanced High Frequency Electric Resistance Welded (HFW) Linepipe MightySeam^|^reg; with a High Quality Weld Seam Suitable for Extra-low-temperature Services

Shunsuke Toyoda, Takatoshi Okabe, Yutaka Matsui, 2014 .

Experimental Study on Inverse Fracture in Drop-Weight Tear Test and Other Laboratory Test: Current Activities in HLP Committee, Japan, Report 2

Taishi Fujishiro, Tetsuya Tagawa, Satoshi Igi, 2016 .

Performance Evaluation of High Quality HFW Linepipe by a Series of Full-Scale Pipe Tests

Shunsuke Toyoda, Satoshi Igi, Satoru Yabumoto, 2014 .

Development of Diagnostics Evaluation Method for Shell-to-Annular Joint of the Oil Tank Under Ultra Low Cycle Fatigue

Kazuyoshi Sekine, Kazuma Kawano, Satoshi Igi, 2004 .

Seismic Integrity of High-Strength Pipelines

Nobuhisa Suzuki, Satoshi Igi, Katsumi Masamura, 2008 .

Assessment of Fatigue Crack Growth in Imperfect Lap Joint: Part 2 — Crack Propagation Analysis Using “SCANP”

Shoichi Yoshida, Masaki Shiratori, Kazuyoshi Sekine, 2012 .

Investigation of Crack Propagation Characteristics Using Instrumented Charpy and DWT Tests for Full-Scale Burst Tested 1219 mm OD Grade 550 (X80) Linepipe

Satoshi Igi, Brian Rothwell, Cindy Guan, 2016 .

Production of Grade X80 High Strain Linepipes for Seismic Region Application

Yaorong Feng, Nobuyuki Ishikawa, Nobuhisa Suzuki, 2010 .

Evaluation of mechanical behavior of new type bellows with two-directional convolutions

Hiroshi Katayama, Satoshi Igi, Masanori Kawahara, 2000 .

Deformation Capacity of Weld Seam of the High Quality HFW Linepipe

Satoshi Igi, Satoru Yabumoto, Teruki Sadasue, 2015 .

Strain Capacity of 48" OD X80 Pipeline In Pressurized Full-scale Bending Test

Shigeru Endo, Takahiro Sakimoto, Satoshi Igi, 2011 .

Fracture Behavior in West Jefferson Test Under Low-Temperature Condition for X65 Steel Pipe With High Charpy Energy: Current Activities in HLP Committee, Japan, Report 1

Takahiro Sakimoto, Satoshi Igi, Toshihiko Amano, 2016 .

Strain Capacity of X100 High-Strain Linepipe for Strain-Based Design Application

Joe Zhou, Nobuhisa Suzuki, Satoshi Igi, 2008 .

Assessment of Fatigue Crack Growth in Imperfect Lap Joint: Part 1 — Analysis of Stress Distribution on Virtual Crack Plane

Shoichi Yoshida, Kazuyoshi Sekine, Satoshi Igi, 2012 .

WES 2808 for Brittle Fracture Assessment of Steel Components Under Seismic Conditions Part II: Change in Mechanical Properties of Structural Steels by Pre-strain and Dynamic Loading

Fumiyoshi Minami, Satoshi Igi, H. Shimanuki, 2016 .

Effect of Crack Geometry And Tensile Properties On Tensile Strain Limit of X80 Linepipe

Nobuyuki Ishikawa, Nobuhisa Suzuki, Takahiro Kubo, 2008 .

WES 2808 for brittle fracture assessment of steel components under seismic conditions Part-IV: Change in mechanical properties and fracture toughness of steel weld HAZ by pre-strain

Fumiyoshi Minami, Satoshi Igi, Masao Kinefuchi, 2016 .

WES 2808 for brittle fracture assessment of steel components under seismic conditions Part III: Change in CTOD fracture toughness of structural steels by pre-strain and dynamic loading

Fumiyoshi Minami, Satoshi Igi, Masao Kinefuchi, 2016 .

Tensile Strain Limits of X80 High-strain Pipelines

Nobuhisa Suzuki, Satoshi Igi, 2007 .

Tensile Strain Capacity of X80 Pipeline Under Tensile Loading With Internal Pressure

Nobuhisa Suzuki, Takahiro Sakimoto, Satoshi Igi, 2010 .

Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components

Fumiyoshi Minami, Mitsuru Ohata, Yukito Hagihara, 2006 .