D. Lampard

发表

Conjugate heat transfer analysis of a salient pole rotor in an air cooled synchronous generator

M. Shanel, Stephen Pickering, D. Lampard, 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

Ventilation and heat transfer in a symmetrically ventilated salient pole synchronous machine

M. Shanel, Stephen Pickering, D. Lampard, 2002 .

Effect of geometric changes on the flow and heat transfer in the end region of a TEFC induction motor

Stephen Pickering, D. Lampard, J. Mugglestone, 1999, IEMDC 1999.

The Use of Computational Fluid Dynamics in the Thermal Design of Rotating Electrical Machines

Stephen Pickering, D. Lampard, J. Mugglestone, 2000 .

Closure to “Discussion of ‘Measured Coolant Distributions Downstream of Single and Double Rows of Film Cooling Holes’” (1983, ASME J. Eng. Power, 105, p. 177)

D. Lampard, N. Hay, W. O. Afejuku, 1983 .

Discharge Coefficient of Turbine Cooling Holes: A Review

D. Lampard, N. Hay, 1996 .

Effects of end winding porosity upon the flow field and ventilation losses in the end region of TEFC induction motors

Stephen Pickering, D. Lampard, J. Mugglestone, 1997 .

The use of computational fluid dynamics to model the air flow in the end region of a TEFC induction motor

Stephen Pickering, D. Lampard, J. Mugglestone, 1997 .

Discharge Coefficient of Turbine Cooling Holes: A Review

D. Lampard, N. Hay, 1998 .

The impact of matrix converter technology on motor design for an integrated flight control surface actuation system

S.J. Pickering, C. Gerada, D. Lampard, 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

Modelling ventilation and cooling of the rotors of salient pole machines

M. Shanel, Stephen Pickering, D. Lampard, 2001, IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485).

The Film Cooling Effectiveness of Double Rows of Holes

D. Lampard, N. Hay, W. O. Afejuku, 1979 .

HEAT TRANSFER FROM THE STATOR END-WINDINGS OF A LOW-VOLTAGE LAP-WOUND ELECTRIC MOTOR

Stephen Pickering, D. Lampard, N. Hay, 1994 .

The Flow and Film Cooling Effectiveness Following Injection through a Row of Holes

D. Lampard, N. W. Foster, D. Lampard, 1980 .

The Effect of Density Ratio on the Heat Transfer Coefficient From a Film-Cooled Flat Plate

D. Lampard, N. Hay, H. Ammari, 1990 .

The Coefficient of Discharge of 30° Inclined Film Cooling Holes With Rounded Entries or Exits

D. Lampard, N. Hay, N. Hay, 1994 .

Effects of the condition of the approach boundary layer and of mainstream pressure gradients on the heat transfer coefficient on film-cooled surfaces

D. Lampard, N. Hay, N. Hay, 1985 .

Heat transfer from the stator end-windings of a low voltage concentric-wound induction motor

Stephen Pickering, D. Lampard, N. Hay, 1995 .

Effects of density and velocity ratio on discrete hole film cooling

D. Lampard, N. W. Foster, D. Lampard, 1975 .

SIMULTANEOUS DETERMINATION OF HEAT TRANSFER COEFFICIENT AND ADIABATIC WALL EFFECTIVENESS ON A FILM COOLED SURFACE USING THE SWOLLEN POLYMER TECHNIQUE

D. Lampard, N. Hay, R. Maali, 1986 .

APPLICATION OF THE SWOLLEN POLYMER TECHNIQUE TO THE STUDY OF HEAT TRANSFER ON FILM COOLED SURFACES

D. Lampard, N. Hay, C. L. Saluja, 1982 .

Heat transfer in a through-ventilated induction motor

Stephen Pickering, D. Lampard, N. Hay, 1998 .

Effect of Acceleration on the Heat Transfer Coefficient on a Film-Cooled Surface

D. Lampard, N. Hay, H. D. Ammari, 1991 .

Effect of Crossflows on the Discharge Coefficient of Film Cooling Holes

D. Lampard, N. Hay, S. Benmansour, 1983 .

The Discharge Coefficient of Flared Film Cooling Holes

D. Lampard, N. Hay, N. Hay, 1995 .