Eiichi Aoyama

发表

Investigation of dynamic behavior of planet gears in planetary gear sets for three-axis driving

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2016 .

Novel Monitoring Method of Hypoid Gear Meshing Based on Thermal Network Model and Infrared Thermography Imagery

Toshiki Hirogaki, Eiichi Aoyama, Mitsuhiko Suzuki, 2016 .

1305 Low Noise Gear Design Method Considering Human Engineering

Toshiki Hirogaki, Eiichi Aoyama, Masaya Miyazawa, 2005 .

State estimation based on image processing of chatter mark on end-milled surface by two-dimensional discrete Fourier transform

Toshiki Hirogaki, Eiichi Aoyama, Nobutoshi Ozaki, 2019 .

Motion Tuning Method of Linear Axes and Rotary Axis Under a Constant Cutting Speed Vector at End-Milling Point With a Five-Axis Controlled Machining Center

Toshiki Hirogaki, Eiichi Aoyama, Takamaru Suzuki, 2015 .

Investigation on Influence of Tooth Precision on Meshing Noise of Planetary Gear Train

Eiichi Aoyama, Seiya Hamada, Masao Nakagawa, 2019 .

Driving Performance of Natural Fiber Gears Made Only from Bamboo Fibers Extracted with a Machining Center

Eiichi Aoyama, Toshiki Hirogaki, Tetsuya Kawabata, 2020, Int. J. Autom. Technol..

C27 Evaluation of Form Accuracy Considered Redundancy of Control Axes with 5-Axis Controlled Machining Center

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2008 .

Improvement of Thread Mill Threading Processing Accuracy by Helical Interpolation Motion

Toshiki Hirogaki, Eiichi Aoyama, Nobutoshi Ozaki, 2018 .

Estimation of Power Consumption of Compact Five-Axis-Controlled Machine Tools with Strain Wave Gear Rotary Axes Based on Servo Interior Information

Toshiki Hirogaki, Eiichi Aoyama, Takumi Fujimura, 2017 .

Influence of Grooved Plate Cross-Sectional Shape on Bending Phenomena in Laser-Quenching Forming Process

Eiichi Aoyama, Toshiki Hirogaki, Yuki Manabe, 2020, Int. J. Autom. Technol..

Investigation of Noise Features of Planetary Gear Trains Based on Human Aural Characteristic

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2017 .

1514 Application of movement characteristic of autonomous, decentralized taxi to AGV

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2006 .

Characteristic of the machine tool having right and left ball screw counter balance forwarding drive system and micro drilling

Toshiki Hirogaki, Eiichi Aoyama, Masahiro Kishimoto, 2016 .

Investigation of Drill Hole Quality of Multi-Layer PWBs for High Current Capacity

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2007 .

LCA Estimation of End-Milling Condition Derived From Catalog-Mining Considering Human Learning Curve

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2012 .

Study on CAM Systems for Printed Wiring Boards

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2005 .

2206 Design Method of Number of Teeth for Low Noise Gear for Vehicle Transmission Considering Human Aural Characteristics

Toshiki Hirogaki, Eiichi Aoyama, Yasuhiro Uenishi, 2008 .

Improvement of machining accuracy under constant feed speed at milling point with a five axis controlled machining center based on Advanced control Method

Toshiki Hirogaki, Eiichi Aoyama, Takamaru Suzuki, 2017 .

1419 A Proposal of CAM System using Cutting-RP

Eiichi Aoyama, Keiji Ogawa, Shohei Tanaka, 2006 .

A8 Shape Reproduction and Cutter Location Using the Normal Vector Generated by Photometric Stereo Method(Digital design and digital manufacturing(CAD/CAM))

Toshiki Hirogaki, Eiichi Aoyama, Hiromichi Nobe, 2009 .

613 Vilbratioii Estimation of Spiral Bevel Gears by Monitoring the Exterior Vibration

Toshiki Hirogaki, Eiichi Aoyama, Yasuhiro Uenishi, 2000 .

Surface Generation for Magic-Mirror by End-Milling and Magnetic Polishing with Digitally Functioned CNC Machining Center

Ryohei Kawai, Kazuya Sawa, Toshiki Hirogaki, 2012 .

1207 Analysis of Temperature Cycle for Mesh of Hypoid Gears Using Infrared Ray Imagery

Toshiki Hirogaki, Eiichi Aoyama, Kouji Nakajima, 2012 .

New Measuring System of Gear Noise at Non-Integer Components of Meshing Frequency Using the Gear Checker.

Toshiki Hirogaki, Eiichi Aoyama, Yasuhiro Uenishi, 2001 .

Quality control method of blind via hole based on monitoring Cu direct laser processing in high heat radiation printed circuit board with a high speed camera

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2016 .

708 A Study of Polishing Motion Using the Minute Change Force with a 5-Axes Closed Link Robot

Wei Wu, Toshiki Hirogaki, Eiichi Aoyama, 2014 .

Consideration of arrangement method and operation of two articulated robots based on torque margin method

Toshiki Hirogaki, Eiichi Aoyama, Tetsuya Murano, 2018 .

Quality Control of Tooth Contact of Gear using Infrared Ray Imagery

Toshiki Hirogaki, Eiichi Aoyama, Yasuhiro Uenishi, 2008 .

Investigation of 2K-HV Planetary Gear Train using Bevel Gears: (Propose of Proper Conditions based on Driving Tests)

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2018 .

603 Monitoring of End-mill Process with a Wireless Multifunctional Tool Holder System

Toshiki Hirogaki, Eiichi Aoyama, Masatoshi Shindou, 2015 .

Study on the Fitting Surface Conditions of Force-Fitted Cylinder and Gear.

Eiichi Aoyama, Norihisa Arai, Takatoshi Sugimoto, 1992 .

Impact Task Model and Acoustic Recognition System With a Humanoid Robot for an Automation of Hammering Test

Toshiki Hirogaki, Eiichi Aoyama, Yoshihisa Sugiura, 2014 .

Detection of Motion Error Under Synchronous Two-Axis Control of a Dual Arm Robot Based on Monitoring of Ball Rolling Motion on a Plate

Wei Wu, Toshiki Hirogaki, Eiichi Aoyama, 2015, Int. J. Autom. Technol..

Investigation of Planet Gear Motion in a Planetary Gear Train With Direct High Speed Monitoring

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2018, Volume 8: 30th Conference on Mechanical Vibration and Noise.

Aid of End-Milling Condition Decision Using Data Mining from Tool Catalog Data for Rough Processing

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2011 .

High Efficiency AGV Transportation System Based on Knowledge of Taxis: Strategy for AGV Behavior at Intersections

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2014 .

Precise and High Response Measuring Method of Meshing Force of Planetary Gear Mechanism

Toshiki Hirogaki, Eiichi Aoyama, Yasuhiro Uenishi, 2012 .

Optimizing drilling conditions in printed circuit board by considering hole quality: Optimization from viewpoint of drill-movement time

Toshiki Hirogaki, Eiichi Aoyama, Naohide Hashimoto, 2004 .

Position Correction Method Based on Servo Information of Large Robot for Piping Manufacturing System

Toshiki Hirogaki, Eiichi Aoyama, Kenichi Takahashi, 2018 .

Monitoring of Processing Phenomenon of Rotating Machining Tool with a Wireless Multifunctional Tool Holder System

Toshiki Hirogaki, Eiichi Aoyama, Masatoshi Shindou, 2017 .

1513 Study on Data Mining from Tool Catalog

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2006 .

BOND GRAPH SIMULATION OF GEAR TRANSMISSION CONSIDERING TOOTH MESHING STIFFNESS AND DAMPING

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2017 .

Monitoring of countersinking processes with a multi-functional wireless tool holder system

Toshiki Hirogaki, Eiichi Aoyama, Masatoshi Shindou, 2018 .

Investigation of Chatter Vibration in End-Milling Process by Considering Coupled System Model

Toshiki Hirogaki, Eiichi Aoyama, Hiroyuki Kodama, 2014 .

Monitoring of End-Mill Process Based on Infrared Imagery with a High Speed Thermography

Toshiki Hirogaki, Eiichi Aoyama, Hiroyuki Kodama, 2014 .

Quality Control Of Fibers End-milled FromBamboo Pipe Using Spiral Tool Path

Toshiki Hirogaki, Eiichi Aoyama, K. Ogawa, 2006 .

INVESTIGATION OF A NOVEL THREE-AXIS DRIVE DESIGN FOR A PLANETARY GEAR TRAIN THAT USES UNIVERSAL JOINTS

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2017 .

3315 Effects on Proposed End-milling Condition Decision-Support System Using Data Mining on Saving Power Consumption

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2011 .

1315 Development of Small Multifunctional Machine Tool for Cell Production System

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2005 .

Whole Quenching of Small Thin Plate with Low-Power Semiconductor Laser Based on Feed-Speed Combination Problem

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2016, Int. J. Autom. Technol..

411 Investigation of Application of Taxi Problem to Manufacturing System

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2004 .

Development of Direct Drive Motor for Machine Tools and its Performance in Machining

Toshiki Hirogaki, Eiichi Aoyama, Takakazu Ikegami, 2016 .

Quality Control of Micro-Drilled Hole Wall of PWBs Using Data-Mining

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2005 .

Elucidation of Process Mechanisms of Cu-Direct Laser Drilling in Printed Wiring Boards Based on Monitoring Method with a High Speed Camera

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2013 .

Estimation of monitoring image in laser blind via-hole drilling process of printed wiring boards with a high speed video camera and temperature visualization from obtained image by two-color method

Toshiki Hirogaki, Eiichi Aoyama, Kouji Kanki, 2019 .

Study on CAM Systems for Printed Wiring Boards

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2008 .

B19 Knowledge discovery of ball end mill condition derived from catalog mining system

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2012 .

GI-01 OPTIMIZATION OF METHOD FOR APPLICATION OF TOOTH CONTACT EVALUATION USING INFRARED RAY IMAGERY(INSPECTION OF GEARS)

Masami Matsubara, Toshiki Hirogaki, Eiichi Aoyama, 2009 .

Investigation of planet gear instant center of rotation under three-axis driving differential planetary gear train with graphical analysis using high speed camera

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2018 .

Proposal of data mining process for tool catalog data introducing machine learning

Toshiki Hirogaki, Eiichi Aoyama, Hiroyuki Kodama, 2019, Transactions of the JSME (in Japanese).

Study on designing a synchronous motor for a spindle axis of machine tools

Toshiki Hirogaki, Eiichi Aoyama, Takakazu Ikegami, 2017 .

1202 Laser Irradiation Control Method in Via-Hole Drilling of Printed Wiring Board Based on High Speed Camera Monitoring

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2015 .

911 Clarification of Characteristic of FRP Gear Meshing with High-speed Camera Image

Toshiki Hirogaki, Eiichi Aoyama, Takahiro Kawasaki, 2009 .

1119 A Development on In-process Monitoring Technology of Dressing Time on Grinding Wheel

Toshiki Hirogaki, Eiichi Aoyama, che yu Chang, 2008 .

615 Effect of Tuning Angular Acceleration Automatically by Servo Tuning Function in Rotary Axis Equipped with Direct Drive Motor for Machine Tools

Toshiki Hirogaki, Eiichi Aoyama, Takakazu Ikegami, 2016 .

Improved Method for Synchronizing Motion Accuracy of Linear and Rotary Axes Under Constant Feed Speed Vector at End Milling Point - Investigation of Motion Error Under NC-Commanded Motion -

Toshiki Hirogaki, Eiichi Aoyama, Takamaru Suzuki, 2019, Int. J. Autom. Technol..

903 Control of Polygonal Ball Rolling Motion by Operating Working Plate with a Dual arm Robot

Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, 2013 .

606 Development of Direct Driving Motor for Machine Tools and its Applications

Toshiki Hirogaki, Eiichi Aoyama, Takakazu Ikegami, 2015 .

Estimation of Micro-drilled Hole Wall of PWBs Using Data-mining

Toshiki Hirogaki, Eiichi Aoyama, Miho Ohsaki, 2007 .

Investigation of hammering task and application based on its hit sound feedback motion with an industrial humanod robot

Toshiki Hirogaki, Eiichi Aoyama, Yoshihisa Sugiura, 2017 .

Construction of an Estimating System of Gear Noise using Thermography

Toshiki Hirogaki, Eiichi Aoyama, Yasuhiro Uenishi, 2005 .

1314 Development of CAM system using cutting RP : The characteristic of the RP material, and acquisition and analysis of processing information

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2005 .

High speed video monitor by two-color method of laser via hole processing of printed circuit board

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2018 .

Cu-Direct Laser Drilling of Blind Via-Hole in Multi-Layer PWBs: Process Visualization Using High-Speed Camera Images

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2012 .

Investigation of Tooth Precision on Meshing Noise of Planetary Gear Train: (Combinations of Different Tooth Precisions and Sound Power Level)

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2018 .

Application of Data-mining to Manufacturing Engineering Using Face Method

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2004 .

224 Study on Small-diameter Drilling of the GFRP Printed Wiring Board : Effect of the Drill Wear on the Drilled Hole Quality

Toshiki Hirogaki, Eiichi Aoyama, Hiromichi Nobe, 2000 .

Investigation of instantaneous rotation center and inertia of planet gear based on the mechanism in the three-axis driving planetary gear train

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2016 .

P056 Consideration ofhitting motion cooperating with hitting tool by humanoid robot

Toshiki Hirogaki, Eiichi Aoyama, Hironori Suzuki, 2016 .

Blind Via Hole in Multi-layer AFRP Printed Wiring Boards by Build Up Process. Quality of Drilled Hole by Small Power Laser.

Toshiki Hirogaki, Eiichi Aoyama, Heisaburo Nakagawa, 2000 .

Investigation of transient response motion of differential planetary gear train during reverse rotation and starting by using high-speed camera monitoring

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2019, Forschung im Ingenieurwesen.

B13 Shape Generation of Color Changing and Lustrous Object with Photometric Stereo Method

Toshiki Hirogaki, Eiichi Aoyama, Ryo Nakatani, 2010 .

Direct Laser Drilling in Copper Clad Printed Wiring Boards : Visualization of Removal Process Based on High-Speed Camera Images(Machine Elements, Design and Manufacturing)

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2010 .

1305 Automatic Tooth Contact Evaluation Method Based on Near-Infrared Ray Imagery

Toshiki Hirogaki, Eiichi Aoyama, Masaki Nagata, 2010 .

Proposal of Ball End-Milling Condition Decision Methodology Using Data-Mining from Tool Catalog Data

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2012 .

Investigation of Control Methods of Chatter Vibration Based on Analysis of End-Milling Chatter Mark

Toshiki Hirogaki, Eiichi Aoyama, Tatsuya Furuki, 2016 .

1210 Investigation of Dynamic Characteristic of Planetary Gear Set Based on Three-axes Torque Measuring under Power Distribution of Hybrid Vehicle

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2014 .

409 Diagnostics of End-mill Process with an Infrared Imagery with Thermography and a Wireless Multifunctional Tool Holder System

Toshiki Hirogaki, Eiichi Aoyama, Masatoshi Shindou, 2016 .

420 A fundamental Study on the Controlling of Working Plate by Dual-arm Robot

Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, 2010 .

Investigation of planet gear instant center of rotation with graphical analysis and direct motion observation in a planetary gear train using high speed camera

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2018 .

Investigation and Improving Method of Two Axes Synchronous Accuracy of Plate Pivot Control with a Dual Arm Robot by Estimating Ball Rolling Motion on the Plate

Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, 2012 .

Autonomous Conveyance Control of AGV Based on Knowledge of Taxi Transportation Rules

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2012 .

1011 Magnetic Polishing of Micro Channel using a Ball-Nose End-Mill Type Tool with a Compact Machine Tool

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2015 .

An Estimation of Cylindrical Surface Obtained by Ball End-milling Using Makyoh-topography Images(Digital design and digital manufacturing)

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2005 .

2203 The Vibration Characteristic of the FRP Gear : Evaluation of Gear Meshing with Hi-Speed Camera

Toshiki Hirogaki, Eiichi Aoyama, Eiji Hara, 2008 .

408 Decision of Drilling Conditions for PCBs by Using Catalog-mining Method Focusing on Drill Shape

Toshiki Hirogaki, Eiichi Aoyama, Yoshimasa Suzuki, 2014 .

Consideration of the Lissajous trajectory of the ball by the plate control of the industrial dual arm robot

Toshiki Hirogaki, Eiichi Aoyama, Masatoshi Nakamura, 2018 .

Study on Estimating Motion Error of Synchronous Two Rotary Axis Control of Working Plate by Monitoring Ball Rolling Path on the Plate and Its Sensitivity (Estimation of Influence of Used Balls with a Dual-Arm Robot)

Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, 2012 .

P094 Vibration Characteristic of the Microperforator Movement in the Machine Tool Having the Counter Balance Mechanism Using the Right and Left Ball Screw

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2015 .

Development of CAM for Printed Wiring Boards using TSP Considered Processing Time

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2004 .

Evaluation system of sideband noise of mesh frequency in bevel gears

Toshiki Hirogaki, Eiichi Aoyama, Yasuhiro Uenishi, 2002 .

Circuit Connection Reliability Analysis of Laser-Drilled Blind Via Holes Using Data-Mining Method

Toshiki Hirogaki, Eiichi Aoyama, Heisaburo Nakagawa, 2007 .

309 Controlling Motion of Rolling Ball by Operating the Working Plate with a Dual-arm Robot

Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, 2010 .

Investigation of Motion Control of Liner Axes and a Rotary Axis Under Constant Feed Speed Vector at Milling Point With a Five-Axis Machining Center

Toshiki Hirogaki, Eiichi Aoyama, Takayuki Akai, 2013 .

CAM System Based on Constant Drill Hole Temperature for Drilling in Printed Wiring Board

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2007 .

An Indicative End-Milling Condition Decision Support System Using Data-Mining for Difficult-to-Cut Materials Based on Comparison with Irregular Pitch and Lead End-Mill and General Purpose End-Mill

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2013 .

Autonomous Distributed AGV System Based on Taxi Transportation Strategy: Effect of Multiple-Load AGVs on Conveyance Efficiency

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2010 .

Motion Control of Rolling Ball by Operating the Working Plate with a Dual-Arm Robot

Wei Wu, Toshiki Hirogaki, Eiichi Aoyama, 2012, Int. J. Autom. Technol..

Investigation of Step Micro-Drilling Motion Based on Modeling of High Speed Spindle Driving Axis on Machine Tools Equipped with Vibration-Proof Mechanism

Toshiki Hirogaki, Eiichi Aoyama, Tatsuya Yamashita, 2014 .

Skillful Operating of Working Plate to Control Ball Rolling Motion With a Dual Arm Robot

Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, 2013 .

Factor Analysis on Internal Damage around Small Daimeter Drilled Hole of GFRP Printed Wiring Boards by Data Mining Method

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2004 .

Investigation of torsional analysis of planetary gear train for mesh coupled vibration based on a bond graph model

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2017 .

607 Study on polishing characteristics of autonomous deformable tool which using the magnetic force

Toshiki Hirogaki, Eiichi Aoyama, Lei Ma, 2015 .

1515 Study on CAM System for Printed Wiring Boards : Decision method for Tool Path in Cosidering Heat Damage

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2006 .

Use of Catalog Mining to Extract Valuable New Knowledge Hidden in Trivial Parameters

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2013 .

1317 Fundamental Study of Relationship between gear sound and background noise of the car

Toshiki Hirogaki, Eiichi Aoyama, Masaya Miyazawa, 2006 .

Process Design and Control Method of Laser Via Hole Drilling of Printed Wiring Boards Based on High Speed Camera Monitor

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2017 .

1422 Study on the Order of Fixed Cycle Drilling for Length Hole of PWB

Toshiki Hirogaki, Eiichi Aoyama, Norihiro Yoshida, 2006 .

Tooth Bending Strength of Hybrid Reinforced Plastics Gears(Machine Elements and Manufacturing)

Toshiki Hirogaki, Eiichi Aoyama, Eiji Hara, 2009 .

Drilled hole damage of small diameter drilling in printed wiring board

Toshiki Hirogaki, Eiichi Aoyama, Hiromich Nobe, 2001 .

Shape Reproduction of Object with Many-Colored Surface by Photometric Stereo Method

Toshiki Hirogaki, Eiichi Aoyama, Seishi Nakamura, 2012 .

D25 Sustainable Manufacturing System Focusing on the Natural Growth of Bamboo(Life cycle engineering and environmentally conscious manufacturing)

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2009 .

1213 Rolling Control of the ball by Smooth Operating the Wbrking Plate with a Dual-aml Robot

Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, 2011 .

Reproduction of Lustrous Object and Cutter Location Using the Normal Vector Generated by Photometric Stereo Method

Toshiki Hirogaki, Eiichi Aoyama, Hiromichi Nobe, 2010 .

Monitoring of End-Mill Temperature with Infrared Thermography and Wireless Tool Holder System

Toshiki Hirogaki, Eiichi Aoyama, Masatoshi Shindou, 2014 .

Decision methodology of end-milling conditions using data-mining

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2011 .

Examination of tuning and performance behavior of musical saw by industrial humanoid robot

Toshiki Hirogaki, Eiichi Aoyama, Akira Mishima, 2018 .

Monitoring of Rotational Vibration in Tap and Endmill Processes with a Wireless Multifunctional Tool Holder System

Toshiki Hirogaki, Eiichi Aoyama, Masatoshi Shindou, 2018, Int. J. Autom. Technol..

P092 Examination of Finishing Method of Micro Channel using the End mill type Magnetic Polishing Tool

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2015 .

1903 Investigation of Micro-Drilling Conditions of Printed Wiring Board Based on Data-mining of Catalog Information

Toshiki Hirogaki, Eiichi Aoyama, Yoshimasa Suzuki, 2015 .

Study on CAM System for Drilling in Printed Wiring Boards: Optimization of Stacking Sheet Considering Drill Processing Temperature

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2009 .

Study on the dynamic accuracy in skillful operating of working plate to control of ball rolling motion with a dual arm robot

Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, 2015 .

1407 Consideration of Digital Magic Mirror Fabrication using CNC Machining Center

Ryohei Kawai, Toshiki Hirogaki, Eiichi Aoyama, 2012 .

Factor Analysis of Circuit Connection Reliability for Laser-drilled Blind Via Hole on Printed Wiring Boards Using Data-mining Method

Toshiki Hirogaki, Eiichi Aoyama, Shinji Maeda, 2004 .

An End-Milling Condition Decision Support System Using Data-Mining for Difficult-to-Cut Materials

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2012 .

MONITORING OF HYPOID GEAR MESHING BASED ON A THERMAL NETWORK MODEL WITH HIGH-SPEED VIDEO THERMOGRAPHY

Toshiki Hirogaki, Eiichi Aoyama, Mitsuhiko Suzuki, 2017 .

1317 Proposal of manufacturing system which applies movement characteristic of taxi

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2005 .

Investigation of Internal Thread Cutting Phenomena in Three Axes by Controlling Helical Interpolate Motion Considering Tool Position Information from Servo-Drive

Toshiki Hirogaki, Eiichi Aoyama, Nobutoshi Ozaki, 2020, Int. J. Autom. Technol..

Influence of Ball Screw Equipped with Counter-balance Mechanism on Machine Tool Vibration in Step-drilling Process

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2015 .

CAM Systems Based on Traveling Salesman Problem From Time Perspective for High Density Through-Hole Drilling

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2005 .

Application of Data-Mining to Factor Analysis of Micro-Drilled Hole Quality for Multi-Layer PWBs

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2005 .

P076 Investigation of Relationship between Rotational Speed and its Direction under Three-axis Driving Planetary Gear Set

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2016 .

D24 Investigation of Sustainable and Reliable Manufacturing System Based on the Environmental Impact(Life cycle engineering and environmentally conscious manufacturing)

Toshiki Hirogaki, Eiichi Aoyama, Sachiko Ogawa, 2009 .

1413 Manufacturing the Makyoh with a Machining center

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2006 .

A09 Multi-functional Small Machine Tool with Laser Heat Treatment System

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2008 .

Damage mechanism in the small-diameter drilling of the GFRP printed wiring board

Toshiki Hirogaki, Eiichi Aoyama, Hiromichi Nobe, 1999 .

Influence of the Number of AGVs on Products Conveyance Efficiency in AGV Transportation System Based on Knowledge of Taxis

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2014 .

Investigation of dynamic characteristic under three-axis transition on the planetary gear train based on the sun gear speed contour map.

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2016 .

0402 Novel Arrangement Method of Two Industrial Robots Based on Monitoring

Toshiki Hirogaki, Eiichi Aoyama, Takashi Sugiura, 2015 .

Design Method of Number of Teeth for Low Noise Gears Considering Human Aural Characteristics

Toshiki Hirogaki, Eiichi Aoyama, Yasuhiro Uenishi, 2008 .

Development of Multi-functional Mini Machine Tool Integrated Heat Treatment Processes(Advanced machine tool)

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2005 .

A Study on Small Diameter Drilling of GFRP for Printed Wiring Board. Influence of Fiber Bundle Thickness of Plain Woven Cloth on Damage of Drilled Hole.

Toshiki Hirogaki, Eiichi Aoyama, Hiromichi Nobe, 1999 .

Investigation of tool internal temperature in end-milling process with a wireless holder system

Toshiki Hirogaki, Eiichi Aoyama, Masatoshi Shindou, 2015 .

Investigation of Gear Meshing Noise of Planetary Gear Mechanism for Hybrid Vehicles

Toshiki Hirogaki, Eiichi Aoyama, Takahiro Miyata, 2014 .

Cutting Condition Decision Support System Using Data Mining -Application of Life Cycle Assessment on Estimation of Cutting Conditions-

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2012 .

Investigation of Power Transmission Mechanism Under Three-Axis Driving Planetary Gear Train Based on the Mechanism

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2016 .

Proposal of Improving Method of Rotational 2-Axis Synchronous Accuracy of Plate Motion Control with a Dual Arm Robot by Estimating Ball Rolling Motion on the Plate

Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, 2012 .

0401 Motion Control of Working Plate Supported with Dual-Arm Robot with Various Postures

Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, 2015 .

Investigation of data-mining method by using micro-drill catalogs for Printed Circuit Boards

Toshiki Hirogaki, Eiichi Aoyama, Hiroyuki Kodama, 2018 .

E14 Optimum Operation of Rotational-axis and Linear-axis based on Power Consumption with a Desktop Five-axis Controlled Machining Center

Toshiki Hirogaki, Eiichi Aoyama, Katsumasa Suto, 2010 .

Study on Thermal Damage of Micro Diameter Hole Drilled by Super-High-Speed Spindle in PWB and Optimum Drilling Conditon(Machine Elements and Manufacturing)

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2008 .

0201 Influence of Servo Activation Frequency on Servo Motor Temperature of Machine Tools Equipped with Idling Reduction System

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2015 .

419 A study on meshing transmission error of spur gear used inverse problems

Toshiki Hirogaki, Eiichi Aoyama, Yasuhiro Uenishi, 2000 .

A Study on Force-Fitted Spur Gears in Consideration of Contact Condition : On the Internal Pressure at the Fitting Surface and Root Stress of Gear Tooth

Eiichi Aoyama, Susumu Harada, Norihisa Arai, 1986 .

Estimation of Environmental Impact on Desktop Size Five-Axis Control Machine Tools by LCA(Machine Elements and Manufacturing)

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2009 .

Fundamental study on machine tools equipped with vibration suppression mechanism based on left and right ball screw and with an ultra-high speed spindle for micro-drilling

Toshiki Hirogaki, Eiichi Aoyama, Masahiro Kishimoto, 2017 .

Optimization of Step Micro Drilling Motion with High Speed and Short Stroke in Printed Wiring Boards by Response Surface Method

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2012 .

P041 Hitting sounds' feed-back control by humanoid robot and the application

Toshiki Hirogaki, Eiichi Aoyama, Asuka Kobayashi, 2015 .

Novel Monitoring Method of Gear Meshing Using a High Response Infrared Thermography

Toshiki Hirogaki, Eiichi Aoyama, Kodai Niwa, 2014 .

A Study on Dynamic Behavior of the Oerlikon-type Spiral Bevel Gears. Rotational Vibration of Gears under Running Conditions.

Toshiki Hirogaki, Eiichi Aoyama, Norihisa Arai, 1996 .

VIBRATION ANALYSIS FOR CAB OF CONSTRUCTION MACHINERY CONSIDERING FLAME TORSIONAL RIGIDITY

Toshiki Hirogaki, Eiichi Aoyama, Tsutao Katayama, 1998 .

On Stresses at Any Part and Slipping at Fitting Surface of Force-Fitted Gear Taking Account of Centrifugal Force

Eiichi Aoyama, Toshio Aida, Mitomo Hirai, 1982 .

Investigation of State Estimation Method by Image Processing of Chatter Surface Pattern in End Mill Cutting

Toshiki Hirogaki, Eiichi Aoyama, Nobutoshi Ozaki, 2018 .

3317 Improvement Accuracy of Cutting Condition Decision Formula Using Catalog Mining

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2011 .

605 Printed Circuit Board Drilling Conditions of Machine Learning from Catalog Mining

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2013 .

Consideration of ball end mill tool route for creation of domed

Toshiki Hirogaki, Eiichi Aoyama, Hiromichi Nobe, 2006 .

Investigation of Drilling Conditions of Printed Circuit Board Based on Data Mining Method from Tool Catalog Data-Base

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2014 .

Estimation of Variation of Tooth Bearing in a Gear Pair by Image Processing Method and It's Influence on Dynamic Behavior of Gear. Variation in Spiral Bevel Gear Pair.

Toshiki Hirogaki, Eiichi Aoyama, Yasuhiro Uenishi, 2001 .

Proposal of Ball End-milling Condition Decision Methodology Using Data-mining from Tool Catalog Data

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2013 .

Investigation of End-Milling Process Based on Monitoring Method with Wireless Telegraphic Multifunctional Tool Holder and Infrared Thermography

Toshiki Hirogaki, Eiichi Aoyama, Masatoshi Shindou, 2016 .

Investigation of Impact Hammering Task of Musical Saw With a Humanoid Robot for Industrial Automation

Toshiki Hirogaki, Eiichi Aoyama, Akira Mishima, 2018 .

Experimental Verification of End-Milling Condition Decision Support System Using Data-Mining for Difficult-to-Cut Materials

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2014 .

421 LCA Analysis of Integrated System of Small Articulated Robot and Desktop Machine

Toshiki Hirogaki, Eiichi Aoyama, Masafumi Suzuki, 2010 .

Nano-Mirror Surface Generation for Hardened Steel Using Ultra-Low Pressure Super-Finishing

Toshiki Hirogaki, Eiichi Aoyama, Yoshiaki Onchi, 2009, Int. J. Autom. Technol..

Influence of Tool Wear on Hole Damage in Small Diameter Drilling of Printed Wiring Boards - Investigation based on Estimation of Cutting Forces and Internal Damage

Toshiki Hirogaki, Eiichi Aoyama, Hisahiro Inoue, 2000 .

Playing a Musical Saw With a Humanoid Robot: Investigation for Industrial Automation

Toshiki Hirogaki, Eiichi Aoyama, Akira Mishima, 2019 .

P037 Two Axes Synchronous Accuracy of Plate Pivot Control under Various Poses of Dual Arm Robot

Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, 2015 .

106 The study on minute diameter drilling on the stainless steel board

Eiichi Aoyama, Hiroshi Ohyama, Tsutao Katayama, 2000 .

Environmental Impact of Desktop-Sized Five-Axis CNC Machine Tool Estimated with LCA

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2011 .

Monitoring of Processing Vibration Characteristic of Rotating Machining Tool with a Wireless Tool Holder System

Toshiki Hirogaki, Eiichi Aoyama, Takamasa Yamamoto, 2019 .

Investigation of Production of Nanofiber Nonwoven Fabric and its Thermal Properties

Eiichi Aoyama, Wei Wu, Toshiki Hirogaki, 2020, Int. J. Autom. Technol..

Investigation of Rotational-Axis and Linear-Axis Operation Based on Power Consumption with Desktop Five-Axis Controlled Machine Tools

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2012 .

Method of Automatic Tooth Contact Evaluation Using Near-Infrared Ray Imagery(Machine Elements, Design and Manufacturing)

Masami Matsubara, Toshiki Hirogaki, Eiichi Aoyama, 2010 .

Data mining from tool catalog introducing machine learning method

Toshiki Hirogaki, Eiichi Aoyama, Hiroyuki Kodama, 2018 .

Study on Small Diameter Drilling for Printed Wiring Board

Toshiki Hirogaki, Eiichi Aoyama, Hiromichi Nobe, 2000 .

B2 Estimation of Environmental Impact on Desktop-Size Multifunctional Machine Tools by LCA(Advanced machine tool)

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2009 .

Investigation of Dynamic Characteristic of Instantaneous Center of Rotat ion Planet Gear Based on the Sun Gear Speed Contour Map in Cont inuously Varying Transmission Under Three-axis Driving of Planetary Gear Train

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2017 .

A study on graphical solution to determine the optimum interference at a fitting surface.

Eiichi Aoyama, Susumu Harada, Norihisa Arai, 1987 .

Investigation of impact task performed by humanoid robot using input shaping control method

Toshiki Hirogaki, Eiichi Aoyama, Hironori Suzuki, 2016, 2016 14th International Conference on Control, Automation, Robotics and Vision (ICARCV).

Optimization of Feed Speed and Stroke for Step Micro Hole Drilling of Printed Wiring Boards by Response Surface Method

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2012 .

Hybrid Process of Laser Heat Treatment and Forming of Thin Plate with a Small Power Semiconductor Laser

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2016 .

412 Study of CAM System for Printed Wiring Boards : Decision method for optimization moving route applied TSP

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2004 .

Study on monitoring tool temperature and vibration in drilling and countersinking processes with a multi-functional wireless communication tool holder system

Toshiki Hirogaki, Eiichi Aoyama, Masatoshi Shindou, 2019 .

C28 Examination of Processing Passing by Prevention of Shagginess on Router Processing Side of AFRP Printed Wiring Board

Toshiki Hirogaki, Eiichi Aoyama, Ryo Nakanishi, 2008 .

Investigation of End-Milling Condition Decision Methodology Based on Data Mining for Tool Catalog Database

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2012, Int. J. Autom. Technol..

A33 Consideration about the Magnetic Polishing by End Mill shaped Tool at the Bottom of Micro Channel

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2014 .

Cutting Condition Decision Methodology Based on Data-Mining of Tool Catalog Data

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2010 .

Investigation of Characteristics of Gear Meshing Noise under Three-Axis Driving Planetary Gear Set

Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama, 2015 .

Design Approach of Gear Teeth Number for Vehicle Transmission Considering Human Aural Characteristics

Toshiki Hirogaki, Eiichi Aoyama, Masaya Miyazawa, 2009 .

Consideration of thread cutting method for helical interpolation of hardened steel by thread mill using servo information

Toshiki Hirogaki, Eiichi Aoyama, Nobutoshi Ozaki, 2019 .

Application of Idling Stop Technology for Servo Motors in Machine Tool Operations to Reduce Electric Power Consumption

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2014 .

Satiny and Continuous-Curvature Corrugated Surface Generation by Integrating End-Milling Processes and Magnetic Polishing with a Machining Center

Toshiki Hirogaki, Eiichi Aoyama, Lei Ma, 2014 .

Thermal Damage of Micro Diameter Hole Drilled by Super-High-Speed Spindle in PWB

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2008 .

Development of estimating method for end-mill processes by an infrared imagery : investigation between tool temperature and process efficiency

Toshiki Hirogaki, Eiichi Aoyama, Hiroyuki Kodama, 2012 .

Development of Recreating Space Technology for Pipe Joint Manufacturing System With a Dual Industrial Robot

Toshiki Hirogaki, Eiichi Aoyama, Kenichi Takahashi, 2014 .

Digital Manufacturing of Makyoh-Magic-Mirror for Difficult-to-Machine Material to Process

Kazuya Sawa, Toshiki Hirogaki, Kazuya Okubo, 2010 .

Design Method of Optimum Number of Teeth for Vehicle Transmission Considering Human Aural Characteristics

Toshiki Hirogaki, Eiichi Aoyama, Yasuhiro Uenishi, 2008 .

Determination of Rim Thickness and Interference for Force-Fitted Helical Gears.

Eiichi Aoyama, Norihisa Arai, Takatoshi Sugimoto, 1991 .

Study on processing method to save the energy consumption with 5-axis controlled compact machine tool which has idling reduction system.

Toshiki Hirogaki, Eiichi Aoyama, Ryo Ota, 2016 .

Mirror-Surface Finishing by Integrating Magnetic-Polishing Technology with a Compact Machine Tool

Toshiki Hirogaki, Eiichi Aoyama, Hiroki Murakami, 2019, Int. J. Autom. Technol..

3337 Investigation of Heat-treatment Method by Low-powered Laser for Small Parts and Evaluation by Life Cycle Assessment

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2011 .

Investigation of Environmental Impact of Downsized Five‐axis‐controlled Machine Tool

Toshiki Hirogaki, Eiichi Aoyama, Sachiko Ogawa, 2011 .

1316 Proposal of manufacturing system supported by data mining

Toshiki Hirogaki, Eiichi Aoyama, Miho Ohsaki, 2005 .

916 Consideration of Percussion Motion with a Humanoid Robot using flexible Rubber Sticks

Toshiki Hirogaki, Eiichi Aoyama, Yoshihisa Sugiura, 2013 .

Experimental Verification of Ball-Nose End-Milling Conditions Derived From Catalog-Mining System Based on Classified Inclination Angles of Machining Surface

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2014 .

Investigation of Rib Sharp for Small Size and High Strength Spiral Bevel Gear Fabricated by Five Axis Controlled Machining Center

Toshiki Hirogaki, Eiichi Aoyama, Takashi Shibata, 2017 .

Investigation of Synchronous Accuracy of Dual Arm Motion of Industrial Robot

Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, 2012 .

Process Control Using a Novel Machine Tool Equipped With Automatic Idling Reduction System

Toshiki Hirogaki, Eiichi Aoyama, Wataru Sato, 2016 .

117 建設機械キャブの概念設計用有限要素モデルの提案 : スポット溶接によるフレームーパネル構造のビーム要素を用いた有限要素簡易モデル(OS1-4 材料・構造体の変形解析)(OS1 材料の力学・疲労・破壊現象)

Toshiki Hirogaki, Eiichi Aoyama, Tsutao Katayama, 2001 .

Analysis of Drilling Process Knowledge Derived From Microdrill Catalog Database Using Data-Mining Method

Toshiki Hirogaki, Eiichi Aoyama, Hiroyuki Kodama, 2017 .

Effect of Rapid-Feed Step-Drilling Cycle and Super-High-Speed Spindle for High-Speed Micro Drilling in Printed Wiring Boards

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2010 .

A025 Experimental Verification of Ball End-milling Condition Decision Support System Applying Hierarchical and Non-hierarchical Clustering Methods

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2013 .

Development of Automatic Servo Tuning Function in Rotary Axis with DDM for Machine Tools and its Performance for Stable Machining

Toshiki Hirogaki, Eiichi Aoyama, Takakazu Ikegami, 2016 .

Predicting Positioning Error and Finding Features for Large Industrial Robots Based on Deep Learning

Toshiki Hirogaki, Eiichi Aoyama, Daiki Kato, 2021, Int. J. Autom. Technol..

Investigation of Optimum Grinding Condition Using cBN Electroplated End-Mill for CFRP Machining

Toshiki Hirogaki, Eiichi Aoyama, Hiroyuki Kousaka, 2021, Int. J. Autom. Technol..

Monitoring of Vibrations in Free-Form Surface Processing Using Ball Nose End Mill Tools with Wireless Tool Holder Systems

Toshiki Hirogaki, Eiichi Aoyama, Masatoshi Shindou, 2021, Int. J. Autom. Technol..

Development of a Forward-Reverse Rotating cBN Electroplated End Mill Type Tool for Cutting and Grinding CFRP

Toshiki Hirogaki, Eiichi Aoyama, Fumiya Muto, 2021, Int. J. Autom. Technol..

Positioning Error Calibration of Industrial Robots Based on Random Forest

Toshiki Hirogaki, Eiichi Aoyama, Naoki Maeda, 2021, Int. J. Autom. Technol..

Reversing Behavior of Planetary Gear Train Influenced by Support Stiffness of Driving Shaft

Toshiki Hirogaki, Eiichi Aoyama, Seiya Hamada, 2021, Int. J. Autom. Technol..

Influence of tool wear on internal damage in small diameter drilling in GFRP

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 1997 .

Investigation on Ball Nose End-milled Cylindrical Surface with a Scanning Line Cutter Path

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2007 .

Microvia Formation for Multi-Layer PWB by Laser Direct Drilling: Improvement of Hole Quality by Silica Fillers in Build-Up Layer

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2011 .

Monitoring of Micro Drilling of Printed Wiring Boards by Thermograph-Drilling Temperature of Printed Wiring Boards Reinforced by Aramid Fiber-

Toshiki Hirogaki, Eiichi Aoyama, Heisaburo Nakagawa, 2004 .

The Research on Abrasive Grain Falling in the Super-finishing Process by CBN Stone.

Toshiki Hirogaki, Eiichi Aoyama, Yoshiaki Onchi, 2002 .

Investigation on cutting mechanism in small diameter drilling for GFRP (thrust force and surface roughness at drilled hole wall)

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 1997 .

On the Stresses of Force-Fitted Gear and the Slipping at Force-Fitted Surface when the Influence of Centrifugal Force is considered

Eiichi Aoyama, Norihisa Arai, Toshio Aida, 1982 .

Microvia Formation for Multi-Layer PWB by Laser Direct Drilling: Improvement of Drilled Hole Quality of GFRP Plates

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2012 .

Shape Control of Fibers End-milled from Bamboo with a Machining Center(Advances in non-traditional machining)

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2005 .

Investigation of Reducing Noise and Wide Geared for a Planetary Gear Train Using Universal Joint (Basic Investigation of Novel Component and Its Evaluation under Driving Tests)

Toshiki Hirogaki, Eiichi Aoyama, Dai Nishida, 2018 .

Monitoring of Rotational Behavior on Spiral Bevel Gears.

Toshiki Hirogaki, Eiichi Aoyama, Yasuhiro Uenishi, 2000 .

Investigation of Eco-Friendly Fixed-Abrasive Polishing with Compact Robot

Toshiki Hirogaki, Eiichi Aoyama, Yoshiaki Onchi, 2010 .

Pulse Laser Irradiation Control Method for Blind Via-Hole Drilling of Printed Wiring Boards Based on High-Speed Camera Monitoring

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2016 .

Evaluation of Blind Via Hole Quality on Multi-Layer Printed Wiring Boards by Cu Direct Laser Drilling

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2006 .

A Study on Surface Quality in Laser Machining of GFRP for Printed Wiring Board Temperature and Damage at Workpiece in Drilling.

Toshiki Hirogaki, Eiichi Aoyama, Hisahiro Inoue, 1997 .

Data-Mining of Factors Affecting Circuit Connection Reliability on Laser-Drilled Micro Blind via Holes in Multi-Layer PWBs

Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa, 2006 .

Study on Super-finishing by CBN Stone. Estimation of Cutting performance using Average crossing angle.

Toshiki Hirogaki, Eiichi Aoyama, Yoshiaki Onchi, 1998 .

Study on small diameter drilling in GFRP

Toshiki Hirogaki, Eiichi Aoyama, Hiromichi Nobe, 1995 .