J. Rakhmonov

发表

Enhanced thermal stability of precipitates and elevated-temperature properties via microalloying with transition metals (Zr, V and Sc) in Al–Cu 224 cast alloys

X. Chen, Dong Li, Kun Liu, 2021, Materials Science and Engineering: A.

Enhanced mechanical properties of high-temperature-resistant Al–Cu cast alloy by microalloying with Mg

Kun Liu, X. Chen, L. Pan, 2020, Journal of Alloys and Compounds.

Comparing evolution of precipitates and strength upon aging of cast and laser-remelted Al-8Ce-0.2Sc-0.1Zr (wt.%).

D. Dunand, D. Weiss, J. Rakhmonov, 2022, Materials science & engineering. A, Structural materials : properties, microstructure and processing.

Ambient- and elevated temperature properties of Sc- and Zr-modified Al-6Ni alloys strengthened by Al3Ni microfibers and Al3(Sc, Zr) nanoprecipitates.

D. Dunand, C. Suwanpreecha, J. Rakhmonov, 2022, Materials science & engineering. A, Structural materials : properties, microstructure and processing.

Enhanced Elevated-Temperature Strength and Creep Resistance of Dispersion-Strengthened Al-Mg-Si-Mn AA6082 Alloys through Modified Processing Route

Kun Liu, P. Rometsch, N. Parson, 2021, Materials.

Dependence of Corrosion Resistance for Aluminum Alloys with Composition Increased Impurity Content

Y. Mansurov, J. Rakhmonov, D. Kadyrova, 2019, Metallurgist.

Effect of V and Zr microalloying, and heat treatment on microstructure and mechanical properties of secondary Al-7Si-3Cu-0.3Mg alloy

A. Fabrizi, F. Bonollo, G. Timelli, 2018, International Journal of Materials Research.

Effects of Al(MnFe)Si dispersoids with different sizes and number densities on microstructure and ambient/elevated-temperature mechanical properties of extruded Al–Mg–Si AA6082 alloys with varying Mn content

P. Rometsch, Kun Liu, N. Parson, 2020 .

Improving the Mechanical Response of Al–Mg–Si 6082 Structural Alloys during High-Temperature Exposure through Dispersoid Strengthening

P. Rometsch, Kun Liu, N. Parson, 2020, Materials.

Interaction of Ca, P trace elements and Sr modification in AlSi5Cu1Mg alloys

G. Timelli, J. Rakhmonov, Giulia Basso, 2018, Journal of Thermal Analysis and Calorimetry.

The Effect of Transition Elements on High‐Temperature Mechanical Properties of Al–Si Foundry Alloys–A Review

F. Bonollo, G. Timelli, J. Rakhmonov, 2016 .

Influence of Melt Superheat, Sr Modifier, and Al-5Ti-1B Grain Refiner on Microstructural Evolution of Secondary Al-Si-Cu Alloys

F. Bonollo, G. Timelli, J. Rakhmonov, 2016, Metallurgical and Materials Transactions A.

Influence of Process Parameters and Sr Addition on the Microstructure and Casting Defects of LPDC A356 Alloy for Engine Blocks

Daniele Caliari, Giulio Timelli, G. Timelli, 2016 .

Solidification microstructure, aging evolution and creep resistance of laser powder-bed fused Al-7Ce-8Mg (wt. %)

D. Dunand, D. Weiss, J. Rakhmonov, 2022, Additive Manufacturing.

Laser-melted Al-3.6Mn-2.0Fe-1.8Si-0.9Zr (wt%) alloy with outstanding creep resistance via formation of α-Al(FeMn)Si precipitates

D. Dunand, Nhon Q. Vo, J. Croteau, 2022, Additive Manufacturing.

Microstructure and Mechanical Properties of Cast Al-Ce-Sc-Zr-(Er) Alloys Strengthened by Al 11Ce 3 Micro-Platelets and L1 2 Al 3(Sc,Zr,Er) Nano-Precipitates

D. Dunand, D. Weiss, Jon-Erik Mogonye, 2022, SSRN Electronic Journal.

Cavitation-resistant intergranular precipitates enhance creep performance of θ'-strengthened Al-Cu based alloys.

D. Dunand, S. Bahl, A. Shyam, 2022, Acta materialia.

Influence of Grain Refiner Addition on the Precipitation of Fe-Rich Phases in Secondary AlSi7Cu3Mg Alloys

L. Arnberg, F. Bonollo, G. Timelli, 2017, International Journal of Metalcasting.

Effects of Compositional Variation on the Thermal Stability of θ\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\theta

Kun Liu, J. Rakhmonov, Grant X. Chen, 2020, Journal of Materials Engineering and Performance.

A New Approach to Determine Tensile Stress-Strain Evolution in Semi-Solid State at Near-Solidus Temperature of Aluminum Alloys

D. Larouche, Kun Liu, M. Javidani, 2021 .

Characterization of the solidification path and microstructure of secondary Al-7Si-3Cu-0.3Mg alloy with Zr, V and Ni additions

F. Bonollo, G. Timelli, J. Rakhmonov, 2017 .

Analysis of the phase composition and the structure of aluminum alloys with increased content of impurities

Y. Mansurov, J. Rakhmonov, 2018, Non-ferrous Metals.

Effect of grain-boundary θ-Al2Cu precipitates on tensile and compressive creep properties of cast Al–Cu–Mn–Zr alloys

C. Kenel, D. Dunand, S. Bahl, 2022, Materials Science and Engineering: A.

Metal-based systems allowing the use of scrap to prepare aluminum alloys

A. Aksyonov, Y. Mansurov, J. Rakhmonov, 2020, Non-ferrous Metals.

Influence of impurity elements on the casting properties of Al – Mg based alloys

Y. Mansurov, J. Rakhmonov, N. V. Letyagin, 2018, Non-ferrous Metals.

Progression of creep deformation from grain boundaries to grain interior in Al-Cu-Mn-Zr alloys

D. Dunand, S. Bahl, D. Ma, 2023, Acta Materialia.

Modified aluminum alloys of Al – Zr system for power transmission lines of Uzbekistan

A. Aksyonov, Y. Mansurov, J. Rakhmonov, 2020 .

An additively manufactured near-eutectic Al-Ce-Ni-Mn-Zr alloy with high creep resistance

A. Plotkowski, D. Dunand, S. Bahl, 2024, Acta Materialia.

Hypereutectic Al-Ce-X (X=Mn, Cr, V, Mo, W) alloys fabricated by laser powder-bed fusion

D. Dunand, J. Rakhmonov, Clement N. Ekaputra, 2024, Additive Manufacturing.

Co-, Ni- and Fe-rich grain-boundary phases enhance creep resistance in θ′-strengthened Al-Cu alloys

D. Dunand, A. Shyam, J. Rakhmonov, 2024, Materials Science and Engineering: A.

Combining solution-, precipitation- and load-transfer strengthening in a cast Al-Ce-Mn-Sc-Zr alloy

D. Dunand, J. Rakhmonov, Clement N. Ekaputra, 2024, Acta Materialia.

Creep deformation and cavitation in an additively manufactured Al-8.6Cu-0.4Mn-0.9Zr (wt%) alloy

A. Plotkowski, D. Dunand, S. Bahl, 2024, Additive Manufacturing.