Jongwon Seok

发表

A parametric dynamic study on hunting stability of full dual-bogie railway vehicle

Jeehyun Jung, Pilkee Kim, Jongwon Seok, 2011 .

Dynamic Parameters Identification of an Air Spring for Vibration Isolation of a Complex Testing System of COG Bonding Process

Ju-Hong Lee, Pilkee Kim, Jongwon Seok, 2010 .

An Efficient Method to Predict the Stability of Ball end Milling Process

Jeehyun Jung, Jongwon Seok, Quang Chinh Ngo, 2015 .

Deburring microparts using a magnetorheological fluid

Sangjin Maeng, Doo Yeon Kim, Byung-Kwon Min, 2012 .

Underwater Target Analysis Using Canonical Correlation Analysis

Keunsung Bae, Taehwan Kim, Jongwon Seok, 2012 .

Bifurcation analyses on the chatter vibrations of a turning process with state-dependent delay

Pilkee Kim, Jongwon Seok, Pilkee Kim, 2012 .

Stability and bifurcation analyses of chatter vibrations in a nonlinear cylindrical traverse grinding process

Jeehyun Jung, Pilkee Kim, Jongwon Seok, 2013 .

Design, Simulation, and Optimization of a Frequency-Tunable Vibration Energy Harvester That Uses a Magnetorheological Elastomer

Xiao Yu Wang, Jeehyun Jung, Pilkee Kim, 2015 .

Separating contribution from two coherent and interfering inputs

Jongwon Seok, V. V. Lenchine, J. Seok, 2005 .

A multi-stable energy harvester: Dynamic modeling and bifurcation analysis

Pilkee Kim, Jongwon Seok, Pilkee Kim, 2014 .

Nonlinear Modeling and Dynamic Simulation Using Bifurcation and Stability Analyses of Regenerative Chatter of Ball-End Milling Process

Jeehyun Jung, Jongwon Seok, Chinh Ngo, 2016 .

A study on the fabrication of curved surfaces using magnetorheological fluid finishing

Sang Jo Lee, Byung-Kwon Min, Yong Jae Kim, 2007 .

Parameter optimization for finishing hard materials with magnetorheological fluid using the penalized multi-response Taguchi method

Sang Jo Lee, Byung-Kwon Min, Kyung In Jang, 2009 .

Microphone Type Classification for Digital Audio Forgery Detection

Jongwon Seok, 2015 .

Prediction of Consumed Electric Power on a MQL Milling Process using a Kriging Meta-Model

Jeehyun Jung, Jongwon Seok, Duk-yong Jang, 2015 .

Multiple Varying Time Delays Model in Regenerative Ball-End Milling Process

Jongwon Seok, Quang Chinh Ngo, 2015 .

Investigation of the lubrication characteristics of an artificial hip joint using a CFD

Pilkee Kim, Jongwon Seok, Sooyoung Lee, 2012 .

Modeling and parameter optimization for cutting energy reduction in MQL milling process

Jeehyun Jung, Jongwon Seok, Duk-yong Jang, 2016 .

An analysis of a vibratory angular-rate gyroscope using polarized piezoceramic bimorph plates. Part 2: solution procedure for the gyroscope with superposed angular velocity

H. F. Tiersten, Jongwon Seok, Henry A. Scarton, 2005 .

Modeling of chemical-mechanical polishing considering thermal coupling effects

Jongwon Seok, J. Seok, Seunghee Oh, 2008 .

Viscoplastic flow in slightly varying channels with wall slip pertaining to a magnetorheological (MR

Pilkee Kim, Jongwon Seok, Pilkee Kim, 2011 .

Development of the optimal bluff body for wind energy harvesting using the synergetic effect of coupled vortex induced vibration and galloping phenomena

Jongwon Seok, J. Seok, Wan Sun, 2019, International Journal of Mechanical Sciences.

Development of low-cost and large-area nanopatterned vitreous carbon stamp for glass nanoreplication

Jongwon Seok, Jonghyun Ju, Seok-min Kim, 2012, 2012 12th IEEE International Conference on Nanotechnology (IEEE-NANO).

A Multiscale Elastohydrodynamic Contact Model for CMP

John A. Tichy, Timothy S. Cale, Jongwon Seok, 2003 .

Evaluation of BCB Bonded and Thinned Wafer Stacks for Three-Dimensional Integration

Jian-Qiang Lu, Ronald J. Gutmann, Timothy S. Cale, 2008 .

Free vibrations of annular sector cantilever plates.

H. F. Tiersten, Jongwon Seok, H. Tiersten, 2004 .

An integrated material removal model for silicon dioxide layers in chemical mechanical polishing processes

Jongwon Seok, J. Seok, Seunghee Oh, 2009 .

Material removal model for chemical–mechanical polishing considering wafer flexibility and edge effects

John A. Tichy, Timothy S. Cale, Jongwon Seok, 2004 .

Thermal Cycling Effects on Critical Adhesion Energy and Residual Stress in Benzocyclobutene-Bonded Wafers

Jian-Qiang Lu, Ronald J. Gutmann, Timothy S. Cale, 2005 .

Inverse analysis of material removal data using a multiscale CMP model

Ronald J. Gutmann, John A. Tichy, Timothy S. Cale, 2003 .

An electrochemomechanical polishing process using magnetorheological fluid

Sang Jo Lee, Byung-Kwon Min, Jongwon Seok, 2010 .

Free vibrations of annular sector cantilever plates. Part 1: out-of-plane motion

H. F. Tiersten, Jongwon Seok, H. Tiersten, 2004 .

Critical Adhesion Energy at the Interface Between Benzocyclobutene and Silicon Nitride Layers

Jian-Qiang Lu, Ronald J. Gutmann, Timothy S. Cale, 2007 .

Critical Adhesion Energy of Benzocyclobutene-Bonded Wafers

Jian-Qiang Lu, Ronald J. Gutmann, Timothy S. Cale, 2006 .

Frequency-tunable electromagnetic energy harvester using magneto-rheological elastomer

Jeehyun Jung, Jongwon Seok, Jeehyun Jung, 2016 .

Soft Elastohydrodynamic Lubrication With Roughness

John A. Tichy, Timothy S. Cale, Jongwon Seok, 2003 .

Resonant behaviors of a nonlinear cantilever beam with tip mass subject to an axial force and electrostatic excitation

Pilkee Kim, Jongwon Seok, Pilkee Kim, 2012 .

Nonlinear dynamic and energetic characteristics of piezoelectric energy harvester with two rotatable external magnets

Jeehyun Jung, Pilkee Kim, Jongwon Seok, 2015 .

Dynamic characteristics of a beam angular-rate sensor

Jongwon Seok, Henry A. Scarton, H. Scarton, 2006 .

An analysis of a vibratory angular-rate gyroscope using polarized piezoceramic bimorph plates. Part 1: derivation of variational equations in the absence of angular velocity

H. F. Tiersten, Jongwon Seok, Henry A. Scarton, 2005 .

Magnetorheological finishing process for hard materials using sintered iron-CNT compound abrasives

Sang Jo Lee, Byung-Kwon Min, Jongwon Seok, 2009 .

Tribological Properties of a Magnetorheological (MR) Fluid in a Finishing Process

Sang Jo Lee, Byung-Kwon Min, Jongwon Seok, 2009 .

A 3D model for magnetorheological fluid that considers neighboring particle interactions in 2D skewed magnetic fields

Sang Jo Lee, Byung-Kwon Min, Jongwon Seok, 2009 .

Comments on “Parametric instability of a cantilever beam with magnetic field and periodic axial load”

Jongwon Seok, 2012 .

A method to fabricate Low-Cost and large area vitreous carbon mold for glass molded microstructures

Jongwon Seok, Jonghyun Ju, Seok-min Kim, 2015 .

Bifurcation analysis on a turning system with large and state-dependent time delay

Pilkee Kim, Jongwon Seok, Pilkee Kim, 2012 .

A behavioral model of axisymmetrically configured magnetorheological fluid using Lekner summation

Sang Jo Lee, Byung-Kwon Min, Jongwon Seok, 2009 .

Galloping-based energy harvester considering enclosure effect

Jongwon Seok, Wan Sun, Soohwan Jo, 2018, AIP Advances.

Fatigue crack growth analysis in layered heterogeneous material systems using peridynamic approach

Jeehyun Jung, Jongwon Seok, Jeehyun Jung, 2016 .

Triple-well potential with a uniform depth: Advantageous aspects in designing a multi-stable energy harvester

Pilkee Kim, Jongwon Seok, Dowung Son, 2016 .