K. Sonoya

发表

Main Factors of Cracking by Elevated Temperature Embrittlement in the Weld Heat Affected Zone of Austenitic Heat-resistant Alloy Pipe

K. Sonoya, Y. Tomisawa, 1991 .

Spray forming of a titanium alloy by low pressure plasma spraying ; plasma spray coatings of Ti-6Al-4V

K. Sonoya, Tsukasa Wakabayashi, 2001 .

Dominant effect of carbide rebounding on the carbon loss during high velocity oxy-fuel spraying of Cr3C2–NiCr

Yu-Yue Wang, Gangchang Ji, Changjin Li, 2002 .

Tensile deformation behavior of plasma-sprayed Ni–45Cr coatings

Keiji Sonoya, Chang-Jiu Li, Chang-jiu Li, 2006 .

Development of Thermal Barrier Coating System with Superior Thermal Cyclic Properties with an Intermediate Layer Containing MoSi2

S. Tobe, K. Sonoya, 2009 .

Thermal Cyclic Properties of Thermal Barrier Coating with MoSi2 Intermediate Layer

Hideo Watanabe, S. Tobe, K. Sonoya, 2007 .

Development of thermal barrier coating system with an intermediate layer containing MoSi2 with superior thermal cyclic properties

M. Nakamura, M. Sekine, K. Sonoya, 2014, 2014 IEEE 8th International Power Engineering and Optimization Conference (PEOCO2014).

Assessment of the properties of sprayed coatings for the thermal barrier applied to the piston of internal-combustion engine

Masanobu Nakamura, M. Sekine, K. Sonoya, 2015 .

Control of the chemical composition distribution in deposited metal by wire and arc-based additive manufacturing

Masanobu Nakamura, Keiji Sonoya, Hiroyuki Sasahara, 2019, Precision Engineering.

Cracking by elevated temperature embrittlement in the HAZ of alloy 800H

K. Sonoya, Y. Tomisawa, 1991 .

Assessment about Erosion Properties of the Stainless Steels in Fluidized Bed

K. Sonoya, Muneharu Shimazaki, 1997 .

Developing of the Aluminum Alloy Solid State Bonding Method in Atmosphere Using High Frequency Induction Heating and Ultrasonic Vibration

Masanobu Nakamura, Takeyuki Abe, K. Sonoya, 2016 .