Osama Bedair

发表

Discussion on “Semi-analytical buckling strength analysis of plates with arbitrary stiffener arrangements” by L. Brubak, J. Hellesland and E. Steen [J Constr Steel Res 2007;63(4):532–43]

Osama Bedair, 2007 .

Numerical and Experimental Comparisons for Modeling Procedures of Bolted and Riveted Connections

Osama Bedair, O. Bedair, 2012 .

Review of blast analysis and design for industrial/residential buildings and ammunition storage facilities

Osama Bedair, 2020 .

Discussion on “Imperfections in steel girder webs with and without perforations under patch loading” by E. Maiorana, C. Pellegrino and C. Modena [J Constr Steel Res 2009; 65 (5): 1121–1129]

Osama Bedair, 2010 .

Design of Mobile Facilities Used in Surface Mining Projects

Osama Bedair, O. Bedair, 2016 .

Graphical Representation for Stability Limit State Design of Wide Flange Beam-Column I-Sections

Osama Bedair, 2011 .

Recent Contributions to the Analysis and Design of Cold Formed Steel Channels

Osama Bedair, 2017 .

Design space representation of channel members for industrial applications

Osama Bedair, 2014 .

Design expression for web shear buckling of box sections by accounting for flange restraints

Osama Bedair, O. Bedair, 2015 .

Guidelines for Design of Transversely Stiffened Thin Walled Steel Plates

Osama Bedair, 2016 .

Practical Design Considerations for Lightweight Channels under Combined Compression, Major and Minor Axis Bending

Osama Bedair, 2011 .

Relocation of Industrial Facilities Using Self-Propelled Modular Transporters (SPMT`S)

Osama Bedair, 2014 .

Serviceability and ultimate limit states of channels under compression and bi-axial bending

Osama Bedair, 2011 .

Stress Analyses of Deep Plate Girders Used at Oil and Gas Facilities with Rectangular Web Penetrations

Osama Bedair, 2011 .

Erratum to “Serviceability and ultimate limit states of channels under compression and bi-axial bending” [Journal of Constructional Steel Research 67/10 (2011) 1415–1425]

Osama Bedair, 2012 .

Recent developments in analysis of deteriorating stiffened panels subjected to static and explosive forces

Osama Bedair, O. Bedair, 2013 .

Discussion of ''Proposals for limit states torsional strength design of wide-flange steel members'' 1

Osama Bedair, 2008 .

A Simplified Procedure for Prediction of Ultimate Strength of Beam-Column Channel Sections

Osama Bedair, 2011 .

Engineering Challenges in the Design of Alberta’s Oil Sands Projects

Osama Bedair, 2013 .

OPTIMUM DESIGN OF REINFORCED CONCRETE FOUNDATIONS

Osama Bedair, 2020 .

Rational Design of Pipe Racks Used for Oil Sands and Petrochemical Facilities

Osama Bedair, 2015 .

Economical design procedures for built-up box sections subject to compression and bi-axial bending

Osama Bedair, 2015 .

Cost-effective modeling strategies for the analysis of spliced steel connections

Osama Bedair, 2011 .

Analysis and Limit State Design of Stiffened Plates and Shells: A World View

Osama Bedair, O. Bedair, 2009 .

An analytical expression to determine “realistic” shear buckling stress in cold‐formed lipped channels

Osama Bedair, 2015 .

Interactive buckling of stiffened box girder supports

Osama Bedair, 2011 .

Residual Strength Assessments of Defective Stiffened Plates Used in Marine and Aerospace Structures

Osama Bedair, 2012 .

Modern steel design and construction in Canada’s oil sands industry

Osama Bedair, 2014 .

Novel Design Procedures for Rectangular Hollow Steel Sections Subject to Compression and Major and Minor Axis Bending

Osama Bedair, 2015 .

Efficient Methodology For Design Of Industrial Electrical Substations and Control Buildings

Osama Bedair, 2021 .

Cost effective design procedures to support modular catalytic reactors

Osama Bedair, 2021 .

Dynamic analysis of box girders with tee-stiffening using unconstrained optimization techniques

Osama Bedair, 2010 .

Plate-Stiffener Assemblies in Uniform Compression. Part I: Buckling

Archibald N. Sherbourne, Osama Bedair, 1993 .

STABILITY, FREE VIBRATION, AND BENDING BEHAVIOR OF MULTISTIFFENED PLATES

Osama Bedair, O. Bedair, 1997 .

Recent Developments in Modeling and Design Procedures of Stiffened Plates and Shells

Osama Bedair, O. Bedair, 2013 .