J. Alegre

发表

Finite element simulation of fracture behaviour for aged duplex stainless steels

F. Gutiérrez-Solana, J. Alegre, 2005 .

HYDRAULIC FRACTURE BEHAVIOR IN THE PRESENCE OF HYDROGEN IN NOTCHED MINIATURE CYLINDRICAL SPECIMENS OF A 42CrMo4 STEEL

I. I. Cuesta, J. Belzunce, A. Díaz, 2022, Engineering Fracture Mechanics.

Parameter Optimisation in Selective Laser Melting on C300 Steel

I. I. Cuesta, J. Martínez, A. Díaz, 2022, Applied Sciences.

Damage modeling in Small Punch Test specimens

E. Mart'inez-Paneda, I. Peñuelas, A. D'iaz, 2016, 1711.06850.

Influence of non-homogeneous microstructure on hydrogen diffusion and trapping simulations near a crack tip in a welded joint

I. I. Cuesta, A. Díaz, C. Rodríguez, 2021 .

Influence of charging conditions on simulated temperature-programmed desorption for hydrogen in metals

I. I. Cuesta, A. Díaz, E. Martínez-Pañeda, 2020, International Journal of Hydrogen Energy.

Numerical study of hydrogen influence on void growth at low triaxialities considering transient effects

I. I. Cuesta, Zhiliang Zhang, A. Díaz, 2019 .

Coupled hydrogen diffusion simulation using a heat transfer analogy

J. M. Alegre, I. I. Cuesta, A. Díaz, 2016 .

Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron

I. I. Cuesta, E. Martínez-Pañeda, A. D'iaz, 2019, International Journal of Fracture.

Fracture toughness of coarse-grain heat affected zone of quenched and tempered CrMo steels with internal hydrogen: Fracture micromechanisms

J. Belzunce, A. Zafra, C. Rodríguez, 2021 .

A review on diffusion modelling in hydrogen related failures of metals

J. M. Alegre, I. I. Cuesta, A. Díaz, 2016 .

A methodology for the numerical assessment of autofrettage influence on hydrogen content near a notch in a 4130 steel pressure vessel

I. I. Cuesta, A. Díaz, J. Alegre, 2017 .

Hydrogen Transport Modelling Near a Crack Tip in a Pressurized Tank

I. I. Cuesta, A. Díaz, J. Alegre, 2016 .

Numerical simulation of hydrogen embrittlement and local triaxiality effects in notched specimens

J. M. Alegre, I. I. Cuesta, A. Díaz, 2017 .

Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation pdf

A. D'iaz, A. Zafra, E. Mart'inez-Paneda, 2020, Theoretical and Applied Fracture Mechanics.

Influence of the notch shape of pre-notched small punch specimens on the creep failure time

J. M. Alegre, I. I. Cuesta, C. Rodríguez, 2015 .

The Essential Work of Fracture parameters for 3D printed polymer sheets

J. M. Alegre, I. I. Cuesta, E. Martínez-Pañeda, 2019, Materials & Design.

The use of deeply double edge notched small punch specimens for the determination of the essential work of fracture (EWF) parameters in polymer sheets

I. I. Cuesta, A. Díaz, J. Alegre, 2016 .

Analysis of the effect of the test rate on polymer essential work of fracture parameters for the small punch test

I. I. Cuesta, J. Alegre, 2016 .

Polymer pre-notched small punch specimens to evaluate the essential work of fracture (EWF) parameters

I. I. Cuesta, V. Ortega-López, J. Alegre, 2015 .

Influence of biaxial pre-deformation on fracture properties using pre-notched small punch specimens

J. M. Alegre, I. I. Cuesta, J. Alegre, 2014 .

Influence of strain state in mechanical behaviour of aluminium alloys using the Small Punch Test

I. I. Cuesta, M. Lorenzo, J. Alegre, 2014 .

New fracture characterization in polymer miniature specimens based on the essential work of fracture

I. I. Cuesta, J. Alegre, 2016 .

Influence of Atmospheric Plasma Spray Parameters (APS) on the Mechanical Properties of Ni-Al Coatings on Aluminum Alloy Substrate

J. M. Alegre, I. I. Cuesta, David Rodríguez, 2021, Metals.

The relationship between the Uniaxial Creep Test and the Small Punch Creep Test of the AZ31 magnesium alloy

I. I. Cuesta, M. Lorenzo, J. Alegre, 2014 .

An Extension of the Monkman-Grant Model for the Prediction of the Creep Rupture Time Using Small Punch Tests

J. M. Alegre, I. I. Cuesta, M. Lorenzo, 2014 .

Determination of the fracture properties of metallic materials using pre-cracked small punch tests

I. I. Cuesta, H. L. Barbachano, J. Alegre, 2015 .

Notch Fracture predictions using the Phase Field method for Ti-6Al-4V produced by Selective Laser Melting after different post-processing conditions

I. I. Cuesta, A. Díaz, E. Martínez-Pañeda, 2022, Theoretical and Applied Fracture Mechanics.

Hardening evaluation of stamped aluminium alloy components using the Small Punch Test

J. M. Alegre, I. I. Cuesta, J. Alegre, 2012 .

Determination of the fracture toughness by applying a structural integrity approach to pre-cracked Small Punch Test specimens

J. M. Alegre, I. I. Cuesta, J. Alegre, 2011 .

Effect of HIP post-processing at 850°C / 200 MPa in the fatigue behavior of Ti-6Al-4V alloy fabricated by Selective Laser Melting

I. I. Cuesta, A. Díaz, L. Peral, 2022, International Journal of Fatigue.

State of the art of Deep Rolling

J. M. Alegre, I. I. Cuesta, P. Delgado, 2016 .

Modelling hydrogenation during cold dwell fatigue of additively manufactured titanium alloys

I. I. Cuesta, A. Díaz, J. Alegre, 2021, Procedia Structural Integrity.

Mechanical Behaviour of Stamped Aluminium Alloy Components by Means of Response Surfaces

I. I. Cuesta, J. Alegre, P. Almaguer-Zaldivar, 2019, Materials.

Determination of plastic collapse load of pre-cracked Small Punch Test specimens by means of response surfaces

I. I. Cuesta, J. Alegre, 2012 .

Determination of the Gurson–Tvergaard damage model parameters for simulating small punch tests

Roberto Lacalle, J. M. Alegre, I. I. Cuesta, 2010 .

Closed-form equations for the calculation of Stress Intensity Factors for embedded cracks in round bars subjected to tensile load

I. I. Cuesta, A. Díaz, J. Alegre, 2022, Theoretical and Applied Fracture Mechanics.

Stress-intensity factor solutions for embedded elliptical cracks in round bars subjected to tensile load

I. I. Cuesta, A. Díaz, J. Alegre, 2021, Theoretical and Applied Fracture Mechanics.

Comparative Life Cycle Assessment of Green Sand Casting and Low Pressure Die Casting for the production of self-cleaning AlMg3-TiO2 Metal Matrix Composite

T. Pabel, J. A. Tamayo-Ramos, J. Ibáñez, 2022, Ecological Indicators.

Some aspects about the crack growth FEM simulations under mixed-mode loading

J. M. Alegre, I. I. Cuesta, J. Alegre, 2010 .

Study of the fatigue failure of an anti-return valve of a high pressure machine

M. Preciado, D. Ferreño, J. Alegre, 2007 .

EFFECT OF CLAMPING FORCE ON THE FATIGUE BEHAVIOUR OF PUNCHED PLATES SUBJECTED TO AXIAL LOADING

J. M. Alegre, A. Aragón, Federico Gutiérrez-Solana, 2006 .

Critical Review on Allowable Material Data Selection in Structural Design of Large Castings for Wind Turbine Gearboxes

I. I. Cuesta, J. Alegre, T. Gómez, 2022, International Journal of Metalcasting.

A new Methodology to Predict Yield Strength Under Biaxial pre-Deformation on Sheet Metals

I. I. Cuesta, D. Casellas, J. Alegre, 2015 .

A new Methodology to Predict Yield Strength Under Biaxial pre-Deformation on Sheet Metals

I. I. Cuesta, D. Casellas, J. Alegre, 2014, Experimental Mechanics.

Mechanical Property Prediction Based on Casting Process Simulation for Structural Parts in the Wind Gearbox Sector

I. I. Cuesta, J. Alegre, T. Gómez, 2023, International Journal of Metalcasting.

A Gurson–Tvergaard based model to simulate the fracture of aged duplex stainless steels

J. M. Alegre, Federico Gutiérrez-Solana, F. Gutiérrez-Solana, 2004 .

An Extension of the Monkman-Grant Model for the Prediction of the Creep Rupture Time Using Small Punch Tests

M. Lorenzo, I. I. Cuesta, J. Alegre, 2014, Experimental Mechanics.

Hydrogen uptake and diffusion kinetics in a quenched and tempered low carbon steel: experimental and numerical study

I. I. Cuesta, A. Díaz, L. Peral, 2023, International Journal of Hydrogen Energy.

Influence of hydrogen on the hydraulic fracture behavior of a 42CrMo4 steel welds: Effect of the prior austenite grain size

I. I. Cuesta, J. Belzunce, A. Díaz, 2023, Engineering Fracture Mechanics.

Residual stresses in cold-formed steel members: Review of measurement methods and numerical modelling

J. M. Alegre, I. I. Cuesta, J. M. Manso, 2021 .

Effect of low temperature tempering prior cryogenic treatment on carburized steels

J. M. Alegre, P. M. Bravo, M. Preciado, 2006 .

Comparative Life Cycle Assessment and Cost Analysis of the Production of Ti6Al4V-TiC Metal–Matrix Composite Powder by High-Energy Ball Milling and Ti6Al4V Powder by Gas Atomization

J. A. Tamayo-Ramos, R. Barros, J. Alegre, 2023, Sustainability.

A finite element simulation methodology of the fatigue behaviour of punched and drilled plate components

J. M. Alegre, Federico Gutiérrez-Solana, A. Aragón, 2004 .

Magnesium alloy defectology AZ91D high-pressure die cast and influence on the fatigue behaviour

J. M. Alegre, I. I. Cuesta, M. Lorenzo, 2013 .

Design of an autofrettaged high-pressure vessel, considering the Bauschinger effect

J. M. Alegre, P. M. Bravo, M. Preciado, 2006 .