C. Camurri

发表

Microhardness and fracture toughness of Ce0.9Gd0.1O1.95 for manufacturing solid oxide electrolytes

Marta López, Kasimayan Uma, S. Ananthakumar, 2009 .

Electrical and thermal properties of 10 mol% Gd3+ doped ceria electrolytes synthesized through citrate combustion technique

Marta López, Kasimayan Uma, S. Ananthakumar, 2009 .

Electrical and thermal characterization of Sm3+ doped ceria electrolytes synthesized by combustion technique

Marta López, Loreto Barcos, S. Ananthakumar, 2012 .

Synthesis and characterization of Gd 3+ and Sm 3+ ion doped ceria electrolytes through an in-situ sulphated combustion technique

Marta López, S. Ananthakumar, Romel Jiménez, 2012 .

Residual stress during heat treatment of steel grinding balls

C. Carrasco, J. Dille, C. Camurri, 2008 .

Combustion synthesis of Y2O3 and Yb–Y2O3: Part I. Nanopowders and their characterization

M. Odén, J. Mouzon, K. Ramam, 2008 .

Microwave assisted combustion synthesis of nanocrystalline yttria and its powder characteristics

M. Odén, J. Mouzon, S. Ananthakumar, 2009 .

Combustion synthesis of Y 2 O 3 and Yb-Y 2 O 3 Part I. Nanopowders and their characterization

J. Mouzon, I. Kero, R. V. Mangalaraja, 2008 .

Synthesis and mechanical properties of low temperature sintered, Sm3+ doped nanoceria electrolyte membranes for IT-SOFC applications

Marta López, S. Ananthakumar, R. Ávila, 2010 .

Performance and characterization of dispersion strengthened Cu-TiB2 composite for electrical use

Marta López, J. Jiménez, D. Corredor, 2005 .

Hot consolidation of Cu-Li powder alloys: a first approach to characterization

C. Carrasco, M. Ortíz, C. Camurri, 2003 .

Electron microscopy characterization of mechanically alloyed and hot consolidates Cu-Cr3C2 particles

Marta López, J. Jiménez, C. Camurri, 2005 .

Sintering, microstructural and mechanical characterization of combustion synthesized Y2O3 and Yb3+-Y2O3

M. Odén, J. Mouzon, Marta López, 2009 .

Improving the Working Life of Steel Grinding Balls by Optimizing their Hardness and Tenacity

R. Colás, C. Carrasco, C. Camurri, 2014 .

Mathematical Model for the Residual Stresses Induced during the Heat Treatment of Grinding Balls

Ana García, C. Camurri, D. Rodríguez, 2003 .

Temperature Distribution, Phase Transformations and Residual Stresses in Heat Treatment of Grinding Balls

C. Carrasco, J. Dille, C. Camurri, 2007 .

Rheology and metal forming of fire-refined copper

Marta López, C. Camurri, R. C. León, 2001 .

Preparation of LSGM electrolyte via fast combustion method and analysis of electrical properties for ReSOC.

R. Udayabhaskar, C. Salvo, R. V. Mangalaraja, 2022, Journal of Electroceramics.

Influence of the Impurities on Cathodic Copper on the Ductility of Copper Wires

C. Carrasco, A. Pagliero, C. Camurri, 2012 .

Influence of Impurities in Cathodic Copper on the Ductility of Copper Wires

C. Carrasco, J. Dille, C. Camurri, 2012, Journal of Materials Engineering and Performance.

Effect of composition on initial permeability of Ni1−xZnxFe2O4 prepared by flash combustion technique

S. Ananthakumar, P. Manohar, S. T. Lee, 2008 .

Optimization of mechanical properties of Al-metal matrix composite produced by direct fusion of beverage cans

C. Carrasco, S. Suárez, F. Soldera, 2014 .

Evaluation of La0.8 Sr0.2MnO3 perovskite prepared by fast solution combustion

M. R. Viswanathan, R. Udayabhaskar, C. Salvo, 2022, Ceramics International.

Copper welding with copper filler

R. Fernández, C. Camurri, M. López, 1996 .

Study of nucleation, growth and coarsening of precipitates in a novel 9%Cr heat resistant steel: Experimental and modeling

D. Rojas, O. Prat, J. P. Sanhueza, 2014 .