Z. Kıral

发表

Stability analysis of delaminated composite beams

H. Ozturk, B. Kiral, Z. Kıral, 2015 .

Dynamic Analysis of A Symmetric Laminated Composite Beam Subjected to a Moving Load with Constant Velocity

B. Kiral, Z. Kıral, 2008 .

Low-velocity single and repeated impact behavior of 3D printed honeycomb cellular panels

Z. Kıral, Gizem Acar Yavuz, Binnur Gören Kıral, 2022, Materials Testing.

AIRFOIL SHAPE OPTIMIZATION USING BÉZIER CURVE AND GENETIC ALGORITHM

Z. Kıral, Hatice Cansu Ayaz Ümütlü, 2022, Aviation.

Free vibration and buckling analyses of laminated composite plates with cutout

Z. Kıral, Dilek Atilla, Cevdet Sencan, 2020, Archive of Applied Mechanics.

Damped Response of Symmetric Laminated Composite Beams to Moving Load with Different Boundary Conditions

Zeki Kiral, Z. Kıral, 2009 .

Harmonic response analysis of symmetric laminated composite beams with different boundary conditions

Z. Kıral, 2014 .

Effect of impact failure on the damping characteristics of beam-like composite structures

B. Kiral, Z. Kıral, B. M. Icten, 2012 .

Effect of the root crack on the lateral buckling loads and natural frequencies of sandwich composite beams

M. Evren Toygar, Onur Sayman, Zeki Kiral, 2013 .

Virus Content and Symptom Expression in Samsun Tobacco Treated with Kinetin and a Benzimidazole Derivative

E. Balázs, Z. Kıral, 1981 .

Effect of inner stiffeners on vibration and noise levels of gearbox housing without changing the mass

Hasan Ozturk, Zeki Kiral, Rafet Can Ümütlü, 2019, Journal of Measurements in Engineering.

Design of three-strand compact spinning system and numerical flow-field simulation for different structures of air-suction guides and suction inserts

Z. Kiral, M. Demir, M. Kılıç, 2021, Textile Research Journal.

Exploratory Study on the Properties of Compact Three-Roving Yarn: Comparison The Properties of Compact Spun, Compact Siro-Spun and Compact Three-Roving Yarns

Murat Demir, S. Sayin, Furkan Balduk, 2022, TEKSTİL VE KONFEKSİYON.

Determination of cutting parameters in end milling operation based on the optical surface roughness measurement

Kemal Yaman, Zeki Kiral, Özer Taga, 2016 .

Experimental investigation of vibration attenuation on a cantilever beam using air-jet pulses with the particle swarm optimized quasi bang–bang controller

Z. Kiral, B. Hizarci, Z. Kıral, 2020, Journal of Vibration and Control.

CLASSIFICATION OF HELICAL GEAR FAULT LEVELS USING FREQUENCY COMPONENT BASED STATISTICAL ANALYSIS WITH ANN

Hasan Ozturk, Zeki Kiral, Rafet Can Ümütlü, 2018 .

Vibration analysis of rolling element bearings with various defects under the action of an unbalanced force

H. Karagülle, Zeki Kiral, H. Karagülle, 2006 .

Simulation and analysis of vibration signals generated by rolling element bearing with defects

H. Karagülle, Zeki Kiral, Z. Kiral, 2003 .

Fault severity detection of a worm gearbox based on several feature extraction methods through a developed condition monitoring system

H. Öztürk, R. C. Ümütlü, Z. Kıral, 2021, SN Applied Sciences.

Experimental Investigation of the Dynamic Response of a Symmetric Laminated Composite Beam Via Laser Vibrometry

B. Kiral, L. Malgaca, Z. Kıral, 2009 .

Analysis of Rolling Element Bearing Faults Via Curve Length Transform

A. Yigit, Z. Kıral, B. Gürses, 2014 .

A preliminary study on the manufacturing aluminum–potassium feldspar metal matrix composite materials

B. Uyulgan, H. Ozturk, U. Aybarç, 2023, Materialwissenschaft und Werkstofftechnik.

Optimal extended state observer based control for vibration reduction on a flexible cantilever beam with using air thrust actuator

Savaş Şahin, Z. Kıral, B. Hızarcı, 2022, Applied Acoustics.

Vibration Region Analysis for Condition Monitoring of Gearboxes Using Image Processing and Neural Networks

Hasan Ozturk, Zeki Kiral, Rafet Can Ümütlü, 2019, Experimental Techniques.