Paweł Ocłoń

发表

Improved multi-objective Jaya optimization algorithm for a solar dish Stirling engine

R. Venkata Rao, Jan Taler, Hameer Singh Keesari, 2019 .

Simulation of water turbine integrated with electrical generator

Dariusz Borkowski, Paweł Ocłoń, Michał Węgiel, 2018 .

The performance analysis of a new thermal backfill material for underground power cable system

R. V. Rao, Dawid Taler, Andrea Vallati, 2016 .

Trombe Wall Utilization for Cold and Hot Climate Conditions

Jan Taler, Paweł Ocłoń, Abdulmajeed A. Mohamad, 2019, Energies.

Optimizing of the underground power cable bedding using momentum-type particle swarm optimization method

Dawid Taler, Marcin Pilarczyk, Piotr Cisek, 2015 .

Novel online simulation-ready models of conjugate heat transfer in combustion chamber waterwall tubes of supercritical power boilers

Paweł Ocłoń, Wiesław Zima, Marzena Nowak-Ocłoń, 2018 .

Stress analysis for the start-up operation on the example of OP-210 boiler drum

Marcin Pilarczyk, Paweł Ocłoń, Andrzej Majcher, 2013 .

Computational and experimental investigation of the aerodynamics and aeroacoustics of a small wind turbine with quasi-3D optimization

Jan Taler, Ali Cemal Benim, Michael Diederich, 2018 .

Simulation of fluid heating in combustion chamber waterwalls of boilers for supercritical steam parameters

Paweł Ocłoń, Wiesław Zima, Marzena Nowak-Ocłoń, 2015 .

Selected Papers from the 9th International Conference on Computational Heat and Mass Transfer (ICCHMT2016)

Dawid Taler, Paweł Ocłoń, Rajesh P. Kanna, 2017 .

Power efficiency management of photovoltaic energy source based on MPPT algorithm

Tomasz Nabagło, Mariusz Krawczyk, Paweł Ocłoń, 2013 .

Analysis of operating conditions for pressure components of steam boilers

Paweł Ocłoń, Bohdan Węglowski, 2012 .

Selected Papers from the XI International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT 2018)

Marcin Trojan, Jan Taler, Paweł Ocłoń, 2019 .

Experimental and Numerical Investigation of Flow Distribution within the Heat Exchanger with Elliptical Tubes

Paweł Ocłoń, Stanisław Łopata, Kamil Chłosta, 2016 .

Experimental stand for investigation of fluid flow in heat exchangers with cross-flow arrangement

Paweł Ocłoń, Marzena Nowak-Ocłoń, Stanisław Łopata, 2017 .

Multi-objective optimization of thermo-acoustic devices using teaching-learning-based optimization algorithm

Jan Taler, Ravipudi Venkata Rao, Paweł Ocłoń, 2017 .

Dimensional optimization of a micro-channel heat sink using Jaya algorithm

Jan Taler, Ravipudi Venkata Rao, Paweł Ocłoń, 2016 .

CFD model and experimental verification of water turbine integrated with electrical generator

Dariusz Borkowski, Paweł Ocłoń, Michał Węgiel, 2019, Energy.

Single- and Multi-Objective Design Optimization of Plate-Fin Heat Exchangers Using Jaya Algorithm

R. V. Rao, Dawid Taler, Jan Taler, 2018 .

Design Optimization of Heat Exchangers with Advanced Optimization Techniques: A Review

R. Venkata Rao, Jan Taler, Ankit Saroj, 2020, Archives of Computational Methods in Engineering.

Mathematical model of a supercritical power boiler for simulating rapid changes in boiler thermal loading

Dawid Taler, Karol Kaczmarski, Jan Taler, 2019, Energy.

Towards Efficient and Clean Process Integration: Utilisation of Renewable Resources and Energy-Saving Technologies

Petar Sabev Varbanov, Hon Huin Chin, Jiří Jaromír Klemeš, 2019, Energies.

Resheat System Optimization

Paweł Ocłoń, 2021, Lecture Notes in Energy.

Evaluation and selection of energy technologies using an integrated graph theory and analytic hierarchy process methods

R. V. Rao, Jan Taler, Paweł Ocłoń, 2016 .

Analysis of operating conditions for high performance heat exchanger with the finned elliptical tube

Paweł Ocłoń, Stanisław Łopata, 2012 .

Determination of heat transfer formulas for gas flow in fin-and-tube heat exchanger with oval tubes using CFD simulations

Dawid Taler, Paweł Ocłoń, D. Taler, 2014 .

Numerical study on the effect of inner tube fouling on the thermal performance of high-temperature fin-and-tube heat exchanger

Ali Cemal Benim, Paweł Ocłoń, Stanisław Łopata, 2015 .

Thermal performance optimization of the underground power cable system by using a modified Jaya algorithm

R. Venkata Rao, Dawid Taler, Andrea Vallati, 2018 .

Numerical study of the effect of fouling on local heat transfer conditions in a high-temperature fin-and-tube heat exchanger

Paweł Ocłoń, Stanisław Łopata, P. Ocłoń, 2015 .

Investigation of the flow conditions in a high-performance heat exchanger

Paweł Ocłoń, Stanisław Łopata, 2010 .

Effects of radiative exchange in an urban canyon on building surfaces’ loads and temperatures

Andrea Vallati, Paweł Ocłoń, Luca Mauri, 2017 .

Simplified numerical study of evaporation processes inside vertical tubes

Paweł Ocłoń, Stanisław Łopata, Marzena Nowak, 2014 .

Modeling and experimental validation and thermal performance assessment of a sun-tracked and cooled PVT system under low solar irradiation

Małgorzata Fedorczak-Cisak, Dawid Taler, Jan Taler, 2020 .

Computer-Aided Determination of the Air-Side Heat Transfer Coefficient and Thermal Contact Resistance for a Fin-and-Tube Heat Exchanger

Dawid Taler, Jan Taler, Paweł Ocłoń, 2015 .

A novel 1D/2D model for simulating conjugate heat transfer applied to flow boiling in tubes with external fins

Paweł Ocłoń, Stanisław Łopata, Marzena Nowak, 2015 .

Numerical simulation of heat dissipation processes in underground power cable system situated in thermal backfill and buried in a multilayered soil

Dawid Taler, Marcin Pilarczyk, Piotr Cisek, 2015 .

Low impact energy saving strategies for individual heating systems in a modern residential building: A case study in Rome

Andrea Vallati, Paweł Ocłoń, Luca Mauri, 2019, Journal of Cleaner Production.

Thermal contact resistance in plate fin-and-tube heat exchangers, determined by experimental data and CFD simulations

Dawid Taler, Paweł Ocłoń, D. Taler, 2014 .