Jianfeng Fan

发表

Effect of Surfactant Polyvinyl Pyrrolidone on the Properties of Microporous Carbon Nanospheres Reinforced Magnesium Matrix Composites

Yongzhen Yang, Bingshe Xu, Lin Jin, 2020, Nanomaterials.

Application of Taguchi Method Design to Investigate Tribological Performance of Laser-Surface-Textured 316L Austenitic Stainless Steel

Qunfeng Zeng, Zhiqi Liu, Shuo Yuan, 2022, Journal of Materials Engineering and Performance.

Microstructure evolution and mechanical properties of Mg matrix composites reinforced with Al and nano SiC particles using spark plasma sintering followed by hot extrusion

Yanchun Zhao, Bing-she Xu, Hongbiao Dong, 2017 .

Tensile Fracture Behavior of 2A14 Aluminum Alloy Produced by Extrusion Process

Hua Zhang, Lifei Wang, Xia Li, 2022, Metals.

Enhancing compressive mechanical properties of rolled AZ31 Mg alloy plates by pre-compression

Bing-she Xu, Hongbiao Dong, Yucheng Wu, 2020 .

Effect of pre-existing {101¯2} extension twins on mechanical properties, microstructure evolution and dynamic recrystallization of AZ31 Mg alloy during uniaxial compression

Bing-she Xu, Hongbiao Dong, Hua Zhang, 2019, Materials Science and Engineering: A.

Hot deformation behavior and workability characteristics of bimodal size SiCp/AZ91 magnesium matrix composite with processing map

K. Nie, Jian-feng Fan, K. Deng, 2014 .

Effects of volume ratio on the microstructure and mechanical properties of particle reinforced magnesium matrix composite

Jian-feng Fan, K. Deng, Shuan-jun Shang, 2014 .

Microstructure and properties of the super-hydrophobic films fabricated on magnesium alloys

Bing-she Xu, Hongbiao Dong, Jingxuan Jia, 2013 .

Microstructure and mechanical properties of SiCp/Mg–Al–Zn composites containing Mg17Al12 phases processed by low-speed extrusion

K. Nie, Jian-feng Fan, K. Deng, 2014 .

Effect of MgO, Mg-Al-NO3 LDH and calcined LDH-CO3 on chloride resistance of alkali activated fly ash and slag blends

H. Brouwers, Q. Yu, Tao Liu, 2020 .

Microstructure stability of as-extruded bimodal size SiCp/AZ91 composite

K. Nie, K. Deng, Shuan-jun Shang, 2014 .

Improved mechanical properties of Mg matrix composites reinforced with Al and carbon nanotubes fabricated by spark plasma sintering followed by hot extrusion

Bing-she Xu, Hongbiao Dong, Yan Yan, 2016 .

Effect of heat treatment on microstructure, mechanical properties and fracture behaviors of sand-cast Mg-4Y-3Nd-1Gd-0.2Zn-0.5Zr alloy

Guohua Wu, Liang Zhang, Wencai Liu, 2016 .

Microstructure and mechanical properties of the AZ31/GW103K bimetal composite rods fabricated by co-extrusion

H. Roven, Hua Zhang, Lifei Wang, 2022, Materials Science and Engineering: A.

High temperature damping behavior of as-deformed Mg matrix influenced by micron and submicron SiCp

Xiaojun Wang, K. Nie, Jian-feng Fan, 2015 .

The aging behavior, microstructure and mechanical properties of AlN/AZ91 composite

Changlin Yang, Hongxiang Li, Jing Li, 2022, Journal of Magnesium and Alloys.

The compressive behavior and energy absorption performance of nano-crystalline porous magnesium fabricated by hydrogenation-dehydrogenation and spark plasma sintering technique

Bing-she Xu, Hongbiao Dong, Hua Zhang, 2021, Journal of Alloys and Compounds.

Exceptional mechanical properties of AZ31 alloy wire by combination of cold drawing and EPT

Bing-she Xu, Hongbiao Dong, Z. Shan, 2020 .

Interfacial Characteristic of as-Deformed SiCp-Reinforced Magnesium Matrix Composite

Xiaojun Wang, Bingshe Xu, K. Deng, 2014, Acta Metallurgica Sinica (English Letters).

Microstructural evolution and precipitate behavior of an AZ61 alloy plate processed with ECAP and electropulsing treatment

Bin Wang, Z. Shan, Jian-feng Fan, 2022, Journal of Materials Research and Technology.

Microstructure evolution and deformation behaviors of AZ31 Mg alloy with different grain orientation during uniaxial compression

Bing-she Xu, Hongbiao Dong, Hua Zhang, 2018 .

Mechanical Behavior and Constitutive Modeling of the Mg-Zn-Y Alloy in an Electrically Assisted Tensile Test

Tao Wu, Zeng Gao, Zhi-chao Xu, 2022, Materials.

Extraordinary mechanical properties of AZ61 alloy processed by ECAP with 160° channel angle and EPT

Bing-she Xu, Hongbiao Dong, Z. Shan, 2021, Journal of Magnesium and Alloys.

Exceptional mechanical properties of ultra-fine grain AZ31 alloy by the combined processing of ECAP, rolling and EPT

Bing-she Xu, Hongbiao Dong, Hua Zhang, 2018, Materials Science and Engineering: A.

Microstructure evolution and mechanical properties of an AZ61 alloy processed with TS-ECAP and EPT

Hongbiao Dong, Z. Shan, Yucheng Wu, 2020 .

Deformation behavior, microstructure evolution, and dynamic recrystallization mechanism of an AZ31 Mg alloy under high-throughput gradient thermal compression

H. Roven, Hua Zhang, Lifei Wang, 2022, Materials Science and Engineering: A.

Microstructure and mechanical properties of SiCp/AZ91 composite processed with extrusion and EPT

Bing-she Xu, Hongbiao Dong, Z. Shan, 2021 .

Microstructure evolution and nano-crystalline production of Mg-9Al-Zn alloy during HDDR processing

Bing-she Xu, Hongbiao Dong, Z. Fan, 2017 .

Effects of processing technologies on mechanical properties of sic particulate reinforced magnesium matrix composites

Bing-she Xu, Hongbiao Dong, Hua Zhang, 2014, Journal of Wuhan University of Technology-Mater. Sci. Ed..

Improved mechanical properties of AZ31 magnesium alloy sheets by repeated cold rolling and annealing using a small pass reduction

Bing-she Xu, Hongbiao Dong, Hua Zhang, 2015 .

Effect of electropulsing treatment on static recrystallization behavior of cold-rolled magnesium alloy ZK60 with different reductions

Bing-she Xu, Hongbiao Dong, Hua Zhang, 2019, Journal of Materials Science & Technology.

Recrystallization and microstructure evolution of the rolled Mg–3Al–1Zn alloy strips under electropulsing treatment

Bing-she Xu, Hongbiao Dong, Hua Zhang, 2015 .

Mechanical Properties, Dry Shrinkage, and Water Penetration of Reusing Fine and Ultrafine Recycled Concrete Aggregate

Ziqiang Peng, Tao Liu, Jianfeng Fan, 2022, Materials.

Effect of yttrium, calcium and zirconium on ignition-proof principle and mechanical properties of magnesium alloys

Bing-she Xu, Zhiyuan Chen, Jian-feng Fan, 2012 .

Microstructure, mechanical properties and static recrystallization behavior of the rolled ZK60 magnesium alloy sheets processed by electropulsing treatment

Bing-she Xu, Hongbiao Dong, Hua Zhang, 2015 .

An engineering route to synthesize stable bulk nanocrystalline magnesium with an average grain size of 20 nm

Hongbiao Dong, Hua Zhang, Jian-feng Fan, 2022, Materials Science and Engineering: A.

The preparation and mechanical properties of nano-magnesium alloy bulks

Bing-she Xu, Hongbiao Dong, Yucheng Wu, 2020 .

Effect of rolling and heat treatment on microstructure and mechanical properties of Mg3.5Y0.8Ca0.4Zr alloy

Bing-she Xu, Hongbiao Dong, Zhiyuan Chen, 2012 .

Correction to: Effect of Extrusion Combination Types on Microstructure and Mechanical Properties of the AZ31/GW103K Bimetallic Composite Plates

H. Roven, Hua Zhang, Lifei Wang, 2022, Acta Metallurgica Sinica (English Letters).