Cem Selcuk

发表

Acoustic methods for biofouling control: A review

Mathew Legg, Mehmet K. Yucel, I. Garcia de Carellan, 2015 .

An Intelligent Methodology for Railways Monitoring Using Ultrasonic Guided Waves

Tat-Hean Gan, Cem Selcuk, S. P. Moustakidis, 2014 .

High temperature gallium orthophosphate transducers for NDT

Tat-Hean Gan, Cem Selcuk, M Kostan, 2016 .

A new synthetic training environment system based on an ICT-approach for manual ultrasonic testing

Tat-Hean Gan, Cem Selcuk, Abdeldjalil Bennecer, 2015 .

Materials issues in surfacing and particulate engineering

Cem Selcuk, 2009 .

A dual de-icing system for wind turbine blades combining high-power ultrasonic guided waves and low-frequency forced vibrations

Liang Cheng, Cem Selcuk, Hossein Habibi, 2015 .

DEVELOPMENT OF AN ULTRASONIC NDT SYSTEM FOR AUTOMATED IN- SITU INSPECTION OF WIND TURBINE BLADES

Tat-Hean Gan, Cem Selcuk, Guoliang Ye, 2014 .

Portable Automated Radio-Frequency Scanner for Non-destructive Testing of Carbon-Fibre-Reinforced Polymer Composites

Tat-Hean Gan, Cem Selcuk, Pawel Kopyt, 2016 .

Coded Waveform Excitation for High-Resolution Ultrasonic Guided Wave Response

Tat-Hean Gan, Mehmet K. Yucel, Cem Selcuk, 2016, IEEE Transactions on Industrial Informatics.

Pulse-compression based iterative time-of-flight extraction of dispersed Ultrasonic Guided Waves

Tat-Hean Gan, Mehmet K. Yucel, Cem Selcuk, 2015, 2015 IEEE 13th International Conference on Industrial Informatics (INDIN).

Defect detection in concrete pile using impulse response measurements with sine sweep excitations

Tat-Hean Gan, Cem Selcuk, Ernst Niederleithinger, 2015 .

Decreasing the influence of dispersive wave modes in long-range ultrasonic rail testing using wavelets

Tat-Hean Gan, Cem Selcuk, Vassilios Kappatos, 2011 .

Fuel tank leakage detection based on acoustic emission

Tat-Hean Gan, Cem Selcuk, Siamak Tavakoli, 2016 .

An experimental study on the applicability of acoustic emission for wind turbine gearbox health diagnosis

Tat-Hean Gan, Mayorkinos Papaelias, Vassilios Kappatos, 2016 .

Developing a Novel Ice Protection System for Wind Turbine Blades Using Vibrations of Both Short and Long Wavelengths

Liang Cheng, Cem Selcuk, Hossein Habibi, 2015 .

Ultrasonic guided waves propagation analysis under different load tension levels in multi-wire cables

Tat-Hean Gan, Cem Selcuk, Cristinel Mares, 2016 .

Study on the Laser-Based Weld Surface Flaw Identification System Employing Wavelet Analysis Methodology

Tat-Hean Gan, Cem Selcuk, Vassilios Kappatos, 2016 .

Crack characterisation using invariable feature extraction in stainless steel specimen used for absorber tubes of CSP applications via EMAT

Liang Cheng, Tat-Hean Gan, Cem Selcuk, 2017 .

Automated Defect Recognition as a Critical Element of a Three Dimensional X-ray Computed Tomography Imaging-Based Smart Non-Destructive Testing Technique in Additive Manufacturing of Near Net-Shape Parts

Tat-Hean Gan, Cem Selcuk, Istvan Szabo, 2017 .

Excitation of Guided Waves in Finite Width Plates Using a Numerical Approach

Tat-Hean Gan, Cem Selcuk, Hossein Habibi, 2016 .

Digital radiographic inspection technique for production friendly quality assessment of PM parts

Tat-Hean Gan, Christian Gierl, Vassilios Kappatos, 2013 .

Long Range Ultrasonic inspection of aircraft wiring

Tat-Hean Gan, Cem Selcuk, Vassilios Kappatos, 2014, 2014 IEEE 23rd International Symposium on Industrial Electronics (ISIE).

HIP processing of materials for offshore (energy) applications

Cem Selcuk, 2014 .

Inspection and Structural Health Monitoring techniques for Concentrated Solar Power plants

Liang Cheng, Tat-Hean Gan, Mayorkinos Papaelias, 2016 .

Flexible Shear Mode Transducer for Structural Health Monitoring Using Ultrasonic Guided Waves

Tat-Hean Gan, Cem Selcuk, Jimmy Yau, 2018, IEEE Transactions on Industrial Informatics.

Electromagnetic Acoustic Transducers Applied to High Temperature Plates for Potential Use in the Solar Thermal Industry

Liang Cheng, Cem Selcuk, Wamadeva Balachandran, 2015 .

Modelling and empirical development of an anti/de-icing approach for wind turbine blades through superposition of different types of vibration

Tat-Hean Gan, Cem Selcuk, Hossein Habibi, 2016 .

An automated long range ultrasonic rail flaw detection system based on the support vector machine algorithm

Cem Selcuk, S. P. Moustakidis, Vassilios Kappatos, 2012 .

High temperature gallium orthophosphate transducers for NDT and monitoring purposes in nuclear power plants

Tat-Hean Gan, Cem Selcuk, M Kostan, 2016 .

Development of a baseline as a novel strategy for a condition monitoring system for the assessment of wind turbine generators

Slim Soua, Cem Selcuk, Vassilios Kappatos, 2014 .

Development of phased array probes to operate in time-of-flight diffraction configuration to continuously monitor defect growth in thermal power plants

Liang Cheng, Tat-Hean Gan, Cem Selcuk, 2015 .

An ICT-Enabled Approach to Optimising the Reliability of Manual Ultrasonic Non-Destructive Testing

Cem Selcuk, Tariq P. Sattar, Graham Edwards, 2012 .

Development of Low Frequency High Temperature Ultrasonic Transducers for In-service Monitoring of Pipework in Power Plants

Tat-Hean Gan, Cem Selcuk, Wamadeva Balachandran, 2016 .

Characterization of Ultrasonic Wave Propagation in the Application of Prevention of Fouling on a Ship ' s Hull

Tat-Hean Gan, Mathew Legg, Cem Selcuk, 2014 .

Defect detection and classification system for automatic analysis of digital radiography images of PM parts

Tat-Hean Gan, Cem Selcuk, M. Iovea, 2014 .

Methods for detection and cleaning of fouling in pipelines

Tat-Hean Gan, Cem Selcuk, Phil Catton, 2012 .

Non-destructive testing of carbon-fibre-reinforced polymer materials with a radio-frequency inductive sensor

Tat-Hean Gan, Cem Selcuk, Marcin Iwanowski, 2015 .

Assessment of material properties of gallium orthophosphate piezoelectric elements for development of phased array probes for continuous operation at 580 degrees C

Cem Selcuk, M Kostan, Abbas Mohimi, 2016 .

Development of an automated digital radiography system for the non-destructive inspection of green powder metallurgy parts

Tat-Hean Gan, Cem Selcuk, Vassilios Kappatos, 2014 .

Assessment of Material Properties of Gallium Orthophosphate Piezoelectric Elements for Development of Phased Array Probes for Continuous Operation at 580°C

Tat-Hean Gan, Cem Selcuk, Luiz Wrobel, 2016 .

Increased range of ultrasonic guided wave testing of overhead transmission line cables using dispersion compensation.

Tat-Hean Gan, Mathew Legg, Cem Selcuk, 2015, Ultrasonics.