Mingchun Zhao

发表

Mechanical reinforcement of bioceramics scaffolds via fracture energy dissipation induced by sliding action of MoS2 nanoplatelets.

C. Shuai, Chengde Gao, You-wen Yang, 2017, Journal of the mechanical behavior of biomedical materials.

Biodegradation Behavior of Coated As-Extruded Mg–Sr Alloy in Simulated Body Fluid

C. Shuai, Ke Yang, L. Tan, 2019, Acta Metallurgica Sinica (English Letters).

In-situ observation on filiform corrosion propagation and its dependence on Zr distribution in Mg alloy WE43

Z. Chen, A. Atrens, Xiaopeng Liang, 2022, Journal of Magnesium and Alloys.

Identification of the effective grain size responsible for the ductile to brittle transition temperature for steel with an ultrafine grain size ferrite/cementite microstructure with a bimodal ferrite grain size distribution

Mingchun Zhao, A. Atrens, Ying Zhao, 2011 .

Effect of applied stress and microstructure on sulfide stress cracking resistance of pipeline steels subject to hydrogen sulfide

Ke Yang, Yiyin Shan, A. Atrens, 2008 .

Construction of bio-functional Mg/HA composite layered coating for orthopedic application

Ke Yang, Peng Wan, Mei Li, 2021, Science China Technological Sciences.

Microstructure evolution and texture tailoring of reduced graphene oxide reinforced Zn scaffold

C. Shuai, You-wen Yang, S. Peng, 2020, Bioactive materials.

Characteristic constitution model and microstructure of an Al-3.5Cu-1.5Li alloy subjected to thermal deformation

Wen You, Hong-ying Li, Rong Du, 2018, Materials Characterization.

Strengthening and improvement of sulfide stress cracking resistance in acicular ferrite pipeline steels by nano-sized carbonitrides

Ke Yang, Mingchun Zhao, 2005 .

Role of microstructure on sulfide stress cracking of oil and gas pipeline steels

Mingchun Zhao, Ke Yang, Y. Shan, 2003 .

Investigation on the H2S-resistant behaviors of acicular ferrite and ultrafine ferrite

Ke Yang, F. Xiao, Yiyin Shan, 2002 .

Effects of nano-sized microalloyed carbonitrides and high-density pinned dislocations on sulfide stress cracking resistance of pipeline steels

Ke Yang, Mingchun Zhao, M. Zhao, 2005 .

Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41

M. Liu, G. Song, Mingchun Zhao, 2008 .

Corrosion and antibacterial performance of novel selective-laser-melted (SLMed) Ti-xCu biomedical alloys

C. Shuai, Chengde Gao, Mingchun Zhao, 2021 .

An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing

G. Song, Mingchun Zhao, P. Schmutz, 2009 .

Influence of the β-phase morphology on the corrosion of the Mg alloy AZ91

M. Liu, G. Song, Mingchun Zhao, 2008 .

Microstructural characteristic and toughening of an ultralow carbon acicular ferrite pipeline steel

Ke Yang, Yiyin Shan, YH Li, 2002 .

Continuous cooling transformation of undeformed and deformed low carbon pipeline steels

Ke Yang, Ming-Chun Zhao, Mingchun Zhao, 2003 .

The effects of thermo-mechanical control process on microstructures and mechanical properties of a commercial pipeline steel

Ke Yang, Yiyin Shan, Mingchun Zhao, 2002 .

Effects of the Primary NbC Elimination on the SSCC Resistance of a HSLA Steel for Oil Country Tubular Goods

Wei Yan, T. Zeng, Xianbo Shi, 2021, Materials.

Comparison on strength and toughness behaviors of microalloyed pipeline steels with acicular ferrite and ultrafine ferrite

Ke Yang, Ming-Chun Zhao, Ke Yang, 2003 .

EFFECT OF MICROSTRUCTURE ON SULFIDE STRESS CORROSION CRACKING OF PIPELINE STEELS

Ke Yang, Yiyin Shan, YH Li, 2001 .

Difference in the role of non-quench aging on mechanical properties between acicular ferrite and ferrite-pearlite pipeline steels

T. Hanamura, Ke Yang, Y. Shan, 2005 .

Lath boundary thin-film martensite in acicular ferrite ultralow carbon pipeline steels

T. Hanamura, Ke Yang, H. Qiu, 2005 .

Influence of graphene oxide (GO) on microstructure and biodegradation of ZK30-xGO composites prepared by selective laser melting

C. Shuai, Chengde Gao, A. Atrens, 2020 .

Study on Fe-xGO Composites Prepared by Selective Laser Melting: Microstructure, Hardness, Biodegradation and Cytocompatibility

C. Shuai, Chengde Gao, A. Atrens, 2020, JOM.

Improvement of biodegradable and antibacterial properties by solution treatment and micro-arc oxidation (MAO) of a magnesium alloy with a trace of copper

Ke Yang, L. Tan, A. Atrens, 2019, Corrosion Science.

Graphene Oxide Reinforced Iron Matrix Composite With Enhanced Biodegradation Rate Prepared by Selective Laser Melting

C. Shuai, Chengde Gao, Mingchun Zhao, 2019, Advanced Engineering Materials.

Ultra-high cycle fatigue behavior of a novel 1.9 GPa grade super-high-strength maraging stainless steel

Ke Yang, Y. Shan, A. Atrens, 2019, Materials Science and Engineering: A.

Effect of grain refinement and crystallographic texture produced by friction stir processing on the biodegradation behavior of a Mg-Nd-Zn alloy

C. Shuai, Mingchun Zhao, Ke Yang, 2019, Journal of Materials Science & Technology.

Improved biodegradation resistance by grain refinement of novel antibacterial ZK30-Cu alloys produced via selective laser melting

C. Shuai, Chengde Gao, Mingchun Zhao, 2019, Materials Letters.

Elimination of Primary NbC Carbides in HSLA Steels for Oil Industry Tubular Goods

T. Zeng, Xianbo Shi, Mingchun Zhao, 2022, JOM.

Microstructure Evolution and Biodegradation Behavior of Laser Rapid Solidified Mg–Al–Zn Alloy

C. Shuai, Chengde Gao, You-wen Yang, 2017 .

Microstructural evolution upon heat treatments and its effect on corrosion in Al-Zn-Mg alloys containing Sc and Zr

A. Atrens, Ying Zhao, D. Yin, 2020 .

The effect of crystallographic orientation on the active corrosion of pure magnesium

G. Song, D. Qiu, A. Atrens, 2008 .

Corrosion behavior of a self-sealing coating containing CeO2 particles on pure Mg produced by micro-arc oxidation

Ke Yang, L. Tan, A. Atrens, 2020 .

In Situ Observation of the Degradation Behavior and the Systematic Investigation of Corrosion Mechanism in AZ31 Alloy

Yu-guang Zhao, Xudong Yan, Lanyue Chen, 2021 .

Corrosion and biological performance of biodegradable magnesium alloys mediated by low copper addition and processing.

Ke Yang, L. Qin, L. Tan, 2018, Materials science & engineering. C, Materials for biological applications.

Biodegradation Resistance and Bioactivity of Hydroxyapatite Enhanced Mg-Zn Composites via Selective Laser Melting

C. Shuai, Chengde Gao, You-wen Yang, 2017, Materials.

Enhancing Degradation Resistance of Biomedical Mg-6Zn-0.5Zr Alloy by the Incorporation of Nanodiamond

Jian Li, Long Liu, Zhimin Guo, 2022, Materials.

Rare Earth Element Yttrium Modified Mg-Al-Zn Alloy: Microstructure, Degradation Properties and Hardness

C. Shuai, Chengde Gao, You-wen Yang, 2017, Materials.

Biodegradation behaviour of hydroxyapatite-containing self-sealing micro-arc-oxidation coating on pure Mg

Ke Yang, L. Tan, A. Atrens, 2021 .

Influence of hybrid extrusion and solution treatment on the microstructure and degradation behavior of Mg-0.1Cu alloy

C. Shuai, Ke Yang, L. Tan, 2018 .

Uniform degradation mode and enhanced degradation resistance of Mg alloy via a long period stacking ordered phase in the grain interior

C. Shuai, Chengde Gao, You-wen Yang, 2019, Materials Research Express.

Microstructure, biodegradation, antibacterial and mechanical properties of ZK60-Cu alloys prepared by selective laser melting technique

C. Shuai, Chengde Gao, You-wen Yang, 2018, Journal of Materials Science & Technology.

Study on a Novel Biodegradable and Antibacterial Fe-Based Alloy Prepared by Microwave Sintering

Mingchun Zhao, B. Ma, A. Atrens, 2021, Materials.

In Vitro Corrosion Resistance and Antibacterial Performance of Novel Fe–xCu Biomedical Alloys Prepared by Selective Laser Melting

C. Shuai, Chengde Gao, A. Atrens, 2021, Advanced Engineering Materials.

Biodegradation, Antibacterial Performance, and Cytocompatibility of a Novel ZK30-Cu-Mn Biomedical Alloy Produced by Selective Laser Melting

Chengde Gao, A. Atrens, Ying Zhao, 2020, International journal of bioprinting.

Effect of Alloying Mn by Selective Laser Melting on the Microstructure and Biodegradation Properties of Pure Mg

C. Shuai, Chengde Gao, Mingchun Zhao, 2020, Metals.

Comparison of the biodegradation of ZK30 subjected to solid solution treating and selective laser melting

C. Shuai, Chengde Gao, A. Atrens, 2021 .

Grain Growth upon Annealing and Its Influence on Biodegradation Rate for Pure Iron

Kegang Zhang, Zhongren Zheng, Yu Zhang, 2022, Materials.

Evolution of microstructure and texture for an Al-0.4 Er alloy during accumulative roll bonding

Zhiming Yu, Mingchun Zhao, A. Atrens, 2019, Journal of Alloys and Compounds.

Formation of Bimodal-Sized Structure and Its Tensile Properties in a Warm-Rolled and Annealed Ultrafine-Grained Ferrite/Cementite Steel

T. Hanamura, F. Yin, K. Nagai, 2008 .

Enhanced initial biodegradation resistance of the biomedical Mg-Cu alloy by surface nanomodification

L. Tan, A. Atrens, D. Yin, 2022, Journal of Magnesium and Alloys.

Formation and characteristic corrosion behavior of alternately lamellar arranged α and β in as-cast AZ91 Mg alloy

C. Shuai, Chengde Gao, Mingchun Zhao, 2019, Journal of Alloys and Compounds.

Acicular ferrite formation during hot plate rolling for pipeline steels

F. Xiao, Yiyin Shan, K. Yang, 2003 .

Precipitation of Carbonitrides and Their Strengthening upon Non-quench Aging for Micro-alloyed Acicular Ferrite Pipeline Steels

T. Hanamura, Ke Yang, H. Qiu, 2005 .

Designing a high Si reduced activation ferritic/martensitic steel for nuclear power generation by using Calphad method

Wei Yan, Mingchun Zhao, Ke Yang, 2019, Journal of Materials Science & Technology.

Strength and toughness tradeoffs for an ultrafine-grain size ferrite/cementite steel produced by warm-rolling and annealing

Mingchun Zhao, Xiaoxia Huang, A. Atrens, 2011 .

Relationship between yield strength and grain size for a bimodal structural ultrafine-grained ferrite/cementite steel

T. Hanamura, F. Yin, A. Atrens, 2007 .

Grain growth and Hall–Petch relation in dual-sized ferrite/cementite steel with nano-sized cementite particles in a heterogeneous and dense distribution

T. Hanamura, Mingchun Zhao, Ke Yang, 2006 .

Microstructural evolution of submicron sized ferrite in bimodal structural ultrafine grained ferrite/cementite steels by annealing below austenized temperature

T. Hanamura, Ke Yang, H. Qiu, 2006 .

The ductile to brittle transition for C–Mn steel with an ultrafine grain ferrite/cementite microstructure

A. Atrens, Ying Zhao, Jing-Li Li, 2011 .

Role of second phase cementite and martensite particles on strength and strain hardening in a plain C-Mn steel

Mingchun Zhao, Xiaoxia Huang, A. Atrens, 2012 .