M. Bocanegra-Bernal

发表

Elucidating of the microstructure of ZrO2 ceramics with additions of 1200 °C heat treated ultrafine MgO powders : Aging at 1420 °C

J. Echeberria, A. Reyes-Rojas, A. Aguilar-Elguezabal, 2007 .

Fracture behaviour of α-Al2O3 ceramics reinforced with a mixture of single-wall and multi-wall carbon nanotubes

A. Aguilar-Elguezabal, M. Bocanegra-Bernal, 2014 .

Compressive strength, hardness and fracture toughness of Al2O3 whiskers reinforced ZTA and ATZ nanocomposites: Weibull analysis

E. Orrantia, A. Nevárez-Rascón, A. Aguilar-Elguezabal, 2011 .

Microstructural evolution during sintering in MgO powders precipitated from sea water under induced agglomeration conditions

M. Bocanegra-Bernal, 2008 .

Fracture toughness of an α-Al2O3 ceramic for joint prostheses under sinter and sinter-HIP conditions

J. Echeberria, A. Nevárez-Rascón, A. Garcia-Reyes, 2009 .

Use of thermally treated bentonitic clay in the formulation of ceramic tiles

C. Domínguez-Ríos, A. Aguilar-Elguezabal, M. Bocanegra-Bernal, 2009 .

Al(2)O(3(w))-Al(2)O(3(n))-ZrO(2) (TZ-3Y)(n) multi-scale nanocomposite: an alternative for different dental applications?

E. Orrantia, A. Nevárez-Rascón, A. Aguilar-Elguezabal, 2010, Acta biomaterialia.

Sintering in a graphite powder bed of alumina-toughened zirconia/carbon nanotube composites: a novel way to delay hydrothermal degradation

O. Bondarchuk, K. Vanmeensel, J. Vleugels, 2015 .

X-ray diffraction and atomic force microscopy study in aged zirconia-toughened alumina composite with dispersion of m-ZrO2 nanoparticles

E. Torres-Moye, O. Solis-Canto, M. H. Bocanegra-Bernal, 2012 .

Hot Isostatic Pressing (HIP) technology and its applications to metals and ceramics

M. H. Bocanegra-Bernal, M. Bocanegra-Bernal, 2004 .

Synthesis of CoAl2O4/Al2O3 nanoparticles for ceramic blue pigments

M. Román-Aguirre, L. D. L. Torre-Sáenz, P. Pizá-Ruiz, 2017 .

Hard and tough carbon nanotube-reinforced zirconia-toughened alumina composites prepared by spark plasma sintering

K. Vanmeensel, J. Vleugels, J. Echeberria, 2012 .

Dense and near-net-shape fabrication of Si3N4 ceramics

Branko Matović, B. Matović, M. H. Bocanegra-Bernal, 2009 .

Mechanical properties of silicon nitride-based ceramics and its use in structural applications at high temperatures

B. Matović, M. Bocanegra-Bernal, 2010 .

Alumina Toughened Zirconia Nanocomposite Incorporating Al2O3 Whiskers

M. H. Bocanegra-Bernal, A. Aguilar-Elguézabal, A. Aguilar-Elguezabal, 2013 .

Effect of low-content of carbon nanotubes on the fracture toughness and hardness of carbon nanotube reinforced alumina prepared by sinter, HIP and sinter + HIP routes

J. Echeberria, M. H. Bocanegra-Bernal, A. Aguilar-Elguézabal, 2017 .

Hot isostatic pressing (HIP) of α-Al2O3 submicron ceramics pressureless sintered at different temperatures: Improvement in mechanical properties for use in total hip arthroplasty (THA)

J. Echeberria, A. Nevárez-Rascón, A. Garcia-Reyes, 2009 .

Electronic configuration and magnetic properties of La0.7Ca0.3Mn1-xFexO3 perovskite NPs: The effect of a lower Fe3+ concentration

J. A. Duarte-Moller, J. Jurado, J. Matutes-Aquino, 2020 .

Using high-purity MgO nanopowder as a stabilizer in two different particle size monoclinic ZrO2: Its influence on the fracture toughness

J. Echeberria, A. Aguilar-Elguezabal, J. Brito-Chaparro, 2009 .

Agglomeration of magnesia powders precipitated from sea water and its effects on uniaxial compaction

M. H. Bocanegra-Bernal, M. Bocanegra-Bernal, 2002 .

A comparison of the effects of multi-wall and single-wall carbon nanotube additions on the properties of zirconia toughened alumina composites

J. Echeberria, A. Reyes-Rojas, M. H. Bocanegra-Bernal, 2011 .

Sintering of carbon nanotube-reinforced zirconia-toughened alumina composites prepared by uniaxial pressing and cold isostatic pressing

M. H. Bocanegra-Bernal, A. Aguilar-Elguézabal, A. Reyes-Rojas, 2018, Materials Research Express.

On the wide range of mechanical properties of ZTA and ATZ based dental ceramic composites by varying the Al2O3 and ZrO2 content

M. H. Bocanegra-Bernal, A. Aguilar-Elguézabal, E. Orrantia, 2009 .

Spark plasma sintering of multi-, single/double- and single-walled carbon nanotube-reinforced alumina composites: Is it justifiable the effort to reinforce them?

J. Echeberria, M. H. Bocanegra-Bernal, A. Aguilar-Elguézabal, 2016 .

Enhanced Ionic Transport and Compressive Residual Stress in Er-Doped Bi2O3 with Lower Er3+ Concentrations

V. Orozco-Carmona, G. Rojas-George, A. Reyes-Rojas, 2018, Journal of Electronic Materials.

Phase transitions in zirconium dioxide and related materials for high performance engineering ceramics

M. H. Bocanegra-Bernal, S. Díaz de la Torre, S. De la Torre, 2002 .

SWCNTs versus MWCNTs as Reinforcement Agents in Zirconia‐and Alumina‐based Nanocomposites: Which One to Use

J. Echeberria, M. H. Bocanegra-Bernal, A. Aguilar-Elguézabal, 2016 .

Nucleation and growth kinetics of La0.7Sr0.3Cr0.4Mn0.6O3-δ SOFC perovskite: Symmetry alteration evolution induced by Cu2+ and Ni2+ impregnation

G. Rojas-George, J. Alvarado-Flores, A. Reyes-Rojas, 2016 .

Sinter and hot isostatic pressing (HIP) of multi-wall carbon nanotubes (MWCNTs) reinforced ZTA nanocomposite: Microstructure and fracture toughness

J. Echeberria, M. H. Bocanegra-Bernal, A. Reyes-Rojas, 2010 .

Formation of a protective alumina layer after sintering for the deceleration of low temperature degradation in alumina-toughened zirconia ceramics

J. Echeberria, A. Reyes-Rojas, A. Garcia-Reyes, 2016 .