Xiaochuan Luo

发表

Estimation of boundary condition of two-dimensional nonlinear PDE with application to continuous casting

Yuan Wang, Yang Yu, Xiaochuan Luo, 2020, Comput. Math. Appl..

Identification of heat transfer coefficients of steel billet in continuous casting by weight least square and improved difference evolution method

Yang Yu, Xiaochuan Luo, Xiaochuan Luo, 2017 .

Parallel Numerical Calculation on GPU for the 3-Dimensional Mathematical Model in the Walking Beam Reheating Furnace

Zhi Yang, Xiaochuan Luo, 2019, IEEE Access.

Two-stage Method for Solving Large-scale Hot Rolling Planning Problem in Steel Production

Tianyou Chai, Xiaochuan Luo, Naiwei Tu, 2011 .

GPU-based model predictive control for continuous casting spray cooling control system using particle swarm optimization

Fan Zhang, Si Wang, Xiaochuan Luo, 2019, Control Engineering Practice.

GPU-Based Model Predictive Control of Nonlinear Parabolic Partial Differential Equations System and Its Application in Continuous Casting

Haixiao Wang, Yuan Wang, Xiaochuan Luo, 2019, IEEE Access.

Method for hot rolling planning considering material requirements of downstream production lines

Tianyou Chai, Hui Huang, Binglin Zheng, 2010, 2010 8th World Congress on Intelligent Control and Automation.

Study on the optimal operation of the steam network in the refinery

Hao Wu, Le Yu, Xiaochuan Luo, 2009, 2009 Chinese Control and Decision Conference.

Integration Method Research for the Detection of Moving Multi-Targets in Complex Dynamic Scenes

Shanqing Li, Xinggang Liu, Xiaochuan Luo, 2006, 2006 6th World Congress on Intelligent Control and Automation.

Evaluation of heat transfer coefficients in continuous casting under large disturbance by weighted least squares Levenberg-Marquardt method

Yang Yu, Yuan Wang, Xiaochuan Luo, 2017 .

Scheduling of steelmaking-continuous casting process using deflected surrogate Lagrangian relaxation approach and DC algorithm

Yuan Wang, Haijuan Cui, Xiaochuan Luo, 2020, Comput. Ind. Eng..

Ant colony optimization for scheduling walking beam reheating furnaces

Shengxiang Yang, Xiaochuan Luo, Rui Hu, 2014, Proceeding of the 11th World Congress on Intelligent Control and Automation.

Modeling and hybrid optimization of batching planning system for steelmaking-continuous casting process

Tianyou Chai, Tianmu Ma, Xiaochuan Luo, 2014, IEEE/CAA Journal of Automatica Sinica.

Calculation and Visualization of Power System Stability Margin Based on PMU Measurements

Michael Vaiman, Marianna Vaiman, Eugene Litvinov, 2010, 2010 First IEEE International Conference on Smart Grid Communications.

Simulation-based optimization methods for caster operation under time confliction condition in steelmaking plant

Xiaochuan Luo, Chongzheng Na, Rujiu Liu, 2011, 2011 Chinese Control and Decision Conference (CCDC).

First-Optimize-Then-Discretize Strategy for the Parabolic PDE Constrained Optimization Problem With Application to the Reheating Furnace

Xiaochuan Luo, Zhi Yang, Ming Liu, 2021, IEEE Access.

Some dominance properties for single-machine tardiness problems with sequence-dependent setup

Chengbin Chu, Chengen Wang, Xiaochuan Luo, 2006 .

Model predictive control of a dynamic nonlinear PDE system with application to continuous casting

Yang Yu, Xiaochuan Luo, Qiang Liu, 2017 .

A branch and bound algorithm of the single machine schedule with sequence dependent setup times for minimizing total tardiness

Feng Chu, Xiaochuan Luo, Xiaochuan Luo, 2006, Appl. Math. Comput..

Optimal Control Method of Parabolic Partial Differential Equations and Its Application to Heat Transfer Model in Continuous Cast Secondary Cooling Zone

Yuan Wang, Xiaochuan Luo, Sai Li, 2015 .

Optimal set values of zone modeling in the simulation of a walking beam type reheating furnace on the steady-state operating regime

Xiaochuan Luo, Zhi Yang, Xiaochuan Luo, 2016 .

Lower and upper bounds for single machine problem with sequence dependent setup to minimize maximum tardiness

Chengen Wang, Xiaochuan Luo, Qilin Shu, 2005, Proceedings of ICSSSM '05. 2005 International Conference on Services Systems and Services Management, 2005..