Toshihiko Kuwabara

发表

Simulation of Ring Blank Drawing by Finite Element Method

Wataru Natsu, Yukihiro Ito, Tatsuki Igarashi, 2012 .

Development of Forming Condition Optimization Methodologyin Deep Drawing Process for Automotive Outer Parts

Susumu Takahashi, Toshihiko Kuwabara, Takeshi Moriya, 2008 .

PC-based blank design system for deep-drawing irregularly shaped prismatic shells with arbitrarily shape flange

Toshihiko Kuwabara, Wen-hua Si, 1997 .

Experimental Verification of Curling Analysis of Stretch-Bent-Unbent Sheet Metal-Springback Analysis of Sheet Metal III-

Kenji Ito, Susumu Takahashi, Toshihiko Kuwabara, 1996 .

Development of Springback Prediction Method using Sheet Forming Simulation

Akitake Makinouchi, Masato Takamura, Toshihiko Kuwabara, 2004 .

Mechanical Properties of Coated Plain Weave Fabrics under Biaxial Loads

Tomokazu Morita, Toshihiko Kuwabara, Hisashi Kumazawa, 2005 .

Development of New Vibration Loosening Test System for Bolted Joint: (Development of Loosening Test Bench of Composite Vibration Type and Its Performance Evaluation)

Teruie Takemasu, Toshihiko Kuwabara, Toshinaka Shinbutsu, 2018 .

Experimental and Analytical Investigation on The Forming Limits of Steel Tube

Kengo Yoshida, Toshihiko Kuwabara, 2005 .

Development of New Vibration Loosening Test System for Bolted Joint: (Performance Evaluation of Various Anti-Loosening Screw Products Using Conventional Loosening Devices)

Teruie Takemasu, Toshihiko Kuwabara, Toshinaka Shinbutsu, 2018 .

Thread Rolling and Performance Evaluation of New Double-Thread Bolt: ― Study on Development of Antiloosening Bolt Fasteners Based on Coarse-Single Coarse-Multiple Double-Thread Mechanism, 1st Report ―@@@―並一条・並多条二重ねじ機構に基づく緩み止めボルト締結体の開発に関する研究第1報―

Teruie Takemasu, Toshihiko Kuwabara, Toshinaka Shinbutsu, 2017 .

Deep drawing of double cylindrical shells

Takashi Jimma, Toshihiko Kuwabara, Soon Chul Choi, 1986 .

Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions

Dorel Banabic, Tudor Balan, Toshihiko Kuwabara, 2003 .

Anisotropic plastic deformation of extruded aluminum alloy tube under axial forces and internal pressure

Kengo Yoshida, Toshihiko Kuwabara, S. Takahashi, 2004 .

Method for Calculating Punch Stroke-Punch Load Curves in Deep-Drawing Irregularly Shaped Cylindrical Shells with Arbitrarily Shaped Flanges

Toshihiko Kuwabara, SI Wen-hua, Masayuki Shuuno, 1997 .

Numerical verification of a biaxial tensile test method using a cruciform specimen

Toshihiko Kuwabara, Hideo Takizawa, T. Kuwabara, 2013 .

Advances in experiments on metal sheets and tubes in support of constitutive modeling and forming simulations

Toshihiko Kuwabara, T. Kuwabara, 2007 .

Effect of strain hardening behavior on forming limit stresses of steel tube subjected to nonproportional loading paths

Kengo Yoshida, Toshihiko Kuwabara, T. Kuwabara, 2007 .

Deep Drawing of Shells with bi-level Bottoms

Takashi Jimma, Toshihiko Kuwabara, T. Kuwabara, 1987 .

Effect of Pre-strain on Anisotropic Hardening and Springback Behavior of an Ultra Low Carbon Automotive Steel

Kwansoo Chung, Toshihiko Kuwabara, Rahul K. Verma, 2011 .

Use of abrupt strain path change for determining subsequent yield surface: experimental study with metal sheets

Viggo Tvergaard, Mitsutoshi Kuroda, Toshihiko Kuwabara, 2000 .

Effect of Anisotropic Yield Functions on The Accuracy of Springback Simulation

Toshihiko Kuwabara, S. Ikeda, Y. Asano, 2004 .

Advances of Plasticity Experiments on Metal Sheets and Tubes and Their Applications to Constitutive Modeling

Toshihiko Kuwabara, T. Kuwabara, 2005 .

Path-dependence of the forming limit stresses in a sheet metal

Mitsutoshi Kuroda, Kengo Yoshida, Toshihiko Kuwabara, 2007 .

Multiaxial tube expansion test method for measurement of sheet metal deformation behavior under biaxial tension for a large strain range

Toshihiko Kuwabara, T. Kuwabara, Fuminori Sugawara, 2013 .

2-D Springback Analysis for Stretch-Bending Processes Based on Total Strain Theory

Yohsuke Miyashita, Toshihiko Kuwabara, T. Kuwabara, 1995 .

Measurement and analysis of yield locus and work hardening characteristics of steel sheets wtih different r-values

Albert Van Bael, Toshihiko Kuwabara, Eiji Iizuka, 2002 .

Measurement and Analysis of Plastic Deformation Characteristics of Sheet Steels Using Biaxial Tensile Test

Toshihiko Kuwabara, Takaaki Hira, Eiji Iizuka, 2001 .

Advances in anisotropy and formability

Frédéric Barlat, Dorel Banabic, Oana Cazacu, 2010 .

Hole expansion simulation of high strength steel sheet

Jeong Whan Yoon, Toshihiko Kuwabara, Eiji Iizuka, 2010 .

Numerical Simulation of Buckling Resistance For UOE Line Pipes With Orthogonal Anisotropic Hardening Behavior

Eiji Tsuru, Kengo Yoshida, Toshihiko Kuwabara, 2008 .

Measurement and analysis of differential work hardening in cold-rolled steel sheet under biaxial tension

Toshihiko Kuwabara, Satoshi Ikeda, S. Ikeda, 1998 .

Boundary element method using analytical integration for three-dimensional laplace problem

Tsuyoshi Takeda, Toshihiko Kuwabara, 1986 .

Tension–compression asymmetry of phosphor bronze for electronic parts and its effect on bending behavior

Yutaka Kumano, Toshihiko Kuwabara, T. Kuwabara, 2009 .

An anisotropic yield criterion for sheet metals

Dorel Banabic, Tudor Balan, Toshihiko Kuwabara, 2004 .

Deep neural network approach to estimate biaxial stress-strain curves of sheet metals

Akinori Yamanaka, Toshihiko Kuwabara, Ikumu Watanabe, 2020 .

Dual-phase steel sheets under cyclic tension–compression to large strains: Experiments and crystal plasticity modeling

Yannis P. Korkolis, Marko Knezevic, Toshihiko Kuwabara, 2016 .