Giovanni Ferrara

发表

Calibration and validation of a numerical model developed to simulate the working conditions of a scooter vehicle on a mission profile

Alessandro Bellissima, Giovanni Ferrara, Francesco AssirelIi, 2009 .

Development of a Non-Conventional Two Stroke Small Engine for Scooter Applications

Alessandro Bellissima, Giovanni Ferrara, Marco Doveri, 2010 .

Analysis of a solar assisted vapour compression cooling system

Giovanni Ferrara, Andrea Chesi, Lorenzo Ferrari, 2013 .

Experimental Characterization of Vaneless Diffuser Rotating Stall: Part V — Influence of Diffuser Geometry on Stall Inception and Performance (3rd Impeller Tested)

Giovanni Ferrara, Lorenzo Ferrari, L. Baldassarre, 2006 .

A computational procedure to define the incidence angle on airfoils rotating around an axis orthogonal to flow direction

Giovanni Ferrara, Francesco Balduzzi, Lorenzo Ferrari, 2016 .

Influence of the Displacement Profile on the Performance and Mechanical Stresses of an Axial Piston Compressor for Refrigeration Applications

Giovanni Ferrara, Lorenzo Ferrari, Giovanni Galoppi, 2016 .

An Experimental and Numerical Assessment of Airfoil Polars for Use in Darrieus Wind Turbines—Part II: Post-stall Data Extrapolation Methods

Giovanni Ferrara, Joaquim Peiró, Francesco Balduzzi, 2015 .

Acoustic Characterization of Automotive Mufflers - Part I: Test Rig Design and Evaluation of Acoustic Properties

Giovanni Ferrara, Lorenzo Ferrari, Giovanni Vichi, 2012 .

A Pre-Design Model to Estimate the Effect of Variable Inlet Guide Vanes on the Performance Map of a Centrifugal Compressor for Automotive Applications

Giovanni Ferrara, Andrea Arnone, Lorenzo Ferrari, 2017 .

Implementation of the “Virtual Camber” Transformation into the Open Source Software QBlade: Validation and Assessment

Giovanni Ferrara, Christian Oliver Paschereit, Christian Navid Nayeri, 2018 .

Treatment plants of solid and liquid wastes hazardous and non- hazardous. Case study: environmental monitoring of metal powders in line volume adjustment

Giovanni Ferrara, Grazia Accardi, Luciana Cimino, 2013 .

Detection of Cylinder-to-Cylinder Injection Variation in a Four-Stroke Diesel Engine by Monitoring the Turbocharger Speed

Alessandro Bellissima, Giovanni Ferrara, Lorenzo Ferrari, 2015 .

The 701F Gas Turbine Design Process: Upgrade and Innovations

Giovanni Ferrara, Bruno Facchini, Carlo Carcasci, 1999 .

Blade Design Criteria to Compensate the Flow Curvature Effects in H-Darrieus Wind Turbines

Giovanni Ferrara, Francesco Balduzzi, Lorenzo Ferrari, 2014 .

Heat Transfer Analysis in a Modern DLN Combustor

Giovanni Ferrara, Bruno Facchini, Luca Innocenti, 2000 .

Acoustic Characterization of Automotive Mufflers - Part II: Validation of the Numerical Models by Means of Experimental Data

Giovanni Ferrara, Lorenzo Ferrari, Giovanni Vichi, 2012 .

An Academic Test Rig for Industrial Centrifugal Compressor Stages: A Design Approach

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2016 .

A Small Power Recovery Expander for Heat Pump COP Improvement

Giovanni Ferrara, Daniele Fiaschi, Lorenzo Ferrari, 2015 .

Combined WAVE-Simulink simulation to predict the exhaust emissions during an ECE-40 homologation cycle for a CVT vehicle

Alessandro Bellissima, Giovanni Ferrara, Luca Carmignani, 2008 .

Virtual incidence effect on rotating airfoils in Darrieus wind turbines

Giovanni Ferrara, Francesco Balduzzi, Lorenzo Ferrari, 2016 .

Estimation of the Aerodynamic Force Induced by Vaneless Diffuser Rotating Stall in Centrifugal Compressor Stages

Giovanni Ferrara, Lorenzo Ferrari, Michele Marconcini, 2016 .

Experimental Investigation and Characterization of the Rotating Stall in a High Pressure Centrifugal Compressor: Part I — Influence of Diffuser Geometry on Stall Inception

Giovanni Ferrara, Lorenzo Ferrari, L. Baldassarre, 2002 .

Feasibility of Small-size Biomass-fueled Hirn-cycle Cogeneration Plants☆

Giovanni Ferrara, Andrea Chesi, Lorenzo Ferrari, 2015 .

A Methodology for Engine Performance Optimization

Giovanni Ferrara, Lorenzo Ferrari, Giovanni Vichi, 2011 .

Model of a small steam engine for renewable domestic CHP (combined heat and power) system

Giovanni Ferrara, Giampaolo Manfrida, A. Pescioni, 2013 .

Feasibility Study of a Geothermal Power Plant with a Double-pipe Heat Exchanger☆

Giovanni Ferrara, Lorenzo Ferrari, Giovanni Galoppi, 2015 .

Experimental investigation on industrial drying process of cotton yarn bobbins: energy consumption and drying time

Giovanni Ferrara, Lorenzo Ferrari, Giovanni Galoppi, 2017 .

Influence of the Blade-Spoke Connection Point on the Aerodynamic Performance of Darrieus Wind Turbines

Giovanni Ferrara, Francesco Balduzzi, Lorenzo Ferrari, 2016 .

Piston Expanders Technology as a Way to Recover Energy From the Expansion of Highly Wet Organic Refrigerants

Giovanni Ferrara, Daniele Fiaschi, Lorenzo Ferrari, 2015 .

Analysis of valve-retainer orientation influence on a reciprocating compressor for natural gas vehicle refueling stations

Giovanni Ferrara, Francesco Balduzzi, Marco Sacco, 2017 .

Experimental Characterization of Vaneless Diffuser Rotating Stall: Part VI — Reduction of Three Impeller Results

Giovanni Ferrara, Lorenzo Ferrari, L. Baldassarre, 2006 .

Development of a Low Pressure Direct Injection System for a Small 2S Engine. Part I - CFD Analysis of the Injection Process

Giovanni Ferrara, Francesco Balduzzi, Giovanni Vichi, 2015 .

Effects Due to the Temperature Measurement Section on the Performance Estimation of a Centrifugal Compressor Stage

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2012 .

Small Wind Turbines in the Built Environment: Influence of Flow Inclination on the Potential Energy Yield

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2013 .

Optimization of the Performance of a Formula SAE Engine by Means of a Wastegate Valve Electronically Actuated

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2016 .

An Experimental Methodology for the Evaluation of the Trapped Air-Fuel Ratio of a Small 2S LPDI Engine

Giovanni Ferrara, Francesco Balduzzi, Giovanni Vichi, 2015 .

Design guidelines for H-Darrieus wind turbines: Optimization of the annual energy yield

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2015 .

Pitch Optimization in Small-size Darrieus Wind Turbines

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2015 .

Development of an optimization algorithm for the energy management of an industrial Smart User

Alessandro Bellissima, Giovanni Ferrara, Lorenzo Ferrari, 2017 .

Modular Simulation of Coolant Internal Network and Rotating Cavity Analysis

Giovanni Ferrara, Bruno Facchini, Carlo Carcasci, 1998 .

Indirect Estimation of In-Cylinder Pressure through the Stress Analysis of an Engine Stud

Giovanni Ferrara, Lorenzo Ferrari, Giulio Lenzi, 2016 .

CFD Evaluation of the Pressure Losses in a Reciprocating Compressor: A Flexible Approach

Giovanni Ferrara, Francesco Balduzzi, Alberto Babbini, 2012 .

Optimization of a PV-wind-Diesel Hybrid System for a Remote Stand-alone Application

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2015 .

A Parametric Computational Fluid Dynamics Analysis of the Valve Pocket Losses in Reciprocating Compressors

Giovanni Ferrara, Francesco Balduzzi, Riccardo Maleci, 2015 .

Parametric and Comparative Assessment of Navier-Stokes CFD Methodologies for Darrieus Wind Turbine Performance Analysis

Giovanni Ferrara, Francesco Balduzzi, Lorenzo Ferrari, 2015 .

Development of an Innovative Multisensor Waveguide Probe With Improved Measurement Capabilities

Giovanni Ferrara, Lorenzo Ferrari, Andrea Fioravanti, 2014 .

Development of a Research Test Rig for Advanced Analyses in Centrifugal Compressors

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2015 .

A Case Study Based Comparison between Solar Thermal and Solar Electric Cooling

Giovanni Ferrara, Lorenzo Ferrari, Ennio Antonio Carnevale, 2015 .

An Innovative Solution for Two-Stroke Engines to Reduce the Short-Circuit Effects

Giovanni Ferrara, Francesco Balduzzi, Giovanni Vichi, 2012 .

Design and Optimization of a Variable Displacement Vane Pump for High Performance IC Engine Lubrication: Part 2 – Lumped Parameters Numerical Analysis

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2009 .

A Rotor Blade Cooling Improvement for Heavy Duty Gas Turbine Using Steam and Mixed Steam/Air Cooling

Giovanni Ferrara, Bruno Facchini, Luca Innocenti, 1998 .

Assessment and Experimental Validation of a 3D Acoustic Model of a Motorcycle Muffler

Giovanni Ferrara, Andrea Fioravanti, Stefano Ricci, 2014 .

Experimental Assessment of a Methodology for the Indirect in-Cylinder Pressure Evaluation in Four-Stroke Internal Combustion Engines

Alessandro Bellissima, Giovanni Ferrara, Alessandro Bianchini, 2018, Energies.

Experimental Analysis of the Pressure Field Inside a Vaneless Diffuser From Rotating Stall Inception to Surge

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2015 .

Influence of the heat storage size on the plant performance in a Smart User case study

Giovanni Ferrara, Andrea Chesi, Lorenzo Ferrari, 2013 .

Potential of the Virtual Blade Model in the analysis of wind turbine wakes using wind tunnel blind tests

Giovanni Ferrara, Francesco Balduzzi, Lorenzo Ferrari, 2017 .

On the influence of virtual camber effect on airfoil polars for use in simulations of Darrieus wind turbines

Giovanni Ferrara, Joaquim Peiró, Francesco Balduzzi, 2015 .

Aerodynamics of Darrieus wind turbines airfoils: the impact of pitching moment

Giovanni Ferrara, Francesco Balduzzi, Lorenzo Ferrari, 2017 .

Experimental Acoustic Analysis of a Motorcycle Dissipative Muffler in Presence of Mean Flow

Giovanni Ferrara, Lorenzo Ferrari, Isacco Stiaccini, 2016 .

An Experimental and Numerical Assessment of Airfoil Polars for Use in Darrieus Wind Turbines—Part I: Flow Curvature Effects

Giovanni Ferrara, Joaquim Peiró, Francesco Balduzzi, 2015 .

Experimental analysis of R744 parallel compression cycle

Giovanni Ferrara, Andrea Chesi, Lorenzo Ferrari, 2014 .

Setup and characterisation of a multi-purpose test rig for R744 refrigerating cycles and equipment

Giovanni Ferrara, Andrea Chesi, Lorenzo Ferrari, 2012 .

Darrieus wind turbine blade unsteady aerodynamics:a three-dimensional Navier-Stokes CFD assessment

Giovanni Ferrara, Jernej Drofelnik, Francesco Balduzzi, 2017 .

A Hybrid Time-frequency Domain Approach for Numerical Modeling of Reciprocating Compressors

Giovanni Ferrara, Lorenzo Ferrari, Isacco Stiaccini, 2015 .

Development of an Engine Variable Geometry Intake System for a Formula SAE Application

Giovanni Ferrara, Lorenzo Ferrari, Giovanni Vichi, 2015 .

Experimental Investigation and Characterization of the Rotating Stall in a High Pressure Centrifugal Compressor:Part IV — Impeller Influence on Diffuser Stability

Giovanni Ferrara, Lorenzo Ferrari, L. Baldassarre, 2003 .

Critical issues in the CFD simulation of Darrieus wind turbines

Giovanni Ferrara, Francesco Balduzzi, Lorenzo Ferrari, 2016 .

Numerical Investigation of the Relationship between Engine Performance and Turbocharger Speed of a Four Stroke Diesel Engine

Alessandro Bellissima, Giovanni Ferrara, Lorenzo Ferrari, 2014 .

Analysis of the Turbocharger Speed to Estimate the Cylinder-to-Cylinder Injection Variations - Part 2 - Frequency Domain Analysis

Alessandro Bellissima, Giovanni Ferrara, Lorenzo Ferrari, 2016 .

A Three-Dimensional Time-Accurate Computational Fluid Dynamics Simulation of the Flow Field Inside a Vaneless Diffuser During Rotating Stall Conditions

Giovanni Ferrara, Lorenzo Ferrari, Michele Marconcini, 2017 .

Experimental characterization of a remoting system for dynamic pressure sensors

Giovanni Ferrara, Lorenzo Ferrari, Gabriele Sonni, 2005 .

Reciprocating Compressor Cylinder’s Cooling: A Numerical Approach Using CFD With Conjugate Heat Transfer

Giovanni Ferrara, Francesco Balduzzi, Riccardo Maleci, 2014 .

Adaptive Vaned Diffuser for Centrifugal Compressor

Giovanni Ferrara, Lorenzo Ferrari, L. Baldassarre, 2005 .

An Improved Model for the Performance Estimation of an H-Darrieus Wind Turbine in Skewed Flow

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2012 .

Influence of actual component characteristics on the optimal energy mix of a photovoltaic-wind-diesel hybrid system for a remote off-grid application

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2018 .

Effectiveness of two-dimensional CFD simulations for Darrieus VAWTs: a combined numerical and experimental assessment

Peter Bachant, Giovanni Ferrara, Francesco Balduzzi, 2017 .

Analysis Of The Rotordynamic Response Of A Centrifugal Compressor Subject To Aerodynamic Loads Due To Rotating Stall

Giovanni Ferrara, Giuseppe Vannini, Lorenzo Ferrari, 2014 .

Suitability of coupling a solar powered ejection cycle with a vapour compression refrigerating machine

Giovanni Ferrara, Andrea Chesi, Lorenzo Ferrari, 2012 .

Critical Analysis of Dynamic Stall Models in Low-Order Simulation Models For Vertical-Axis Wind Turbines

Giovanni Ferrara, Francesco Balduzzi, Lorenzo Ferrari, 2016 .

A Parametric CFD Analysis of the Valve Pocket Losses in Reciprocating Compressors

Giovanni Ferrara, Francesco Balduzzi, Riccardo Maleci, 2013 .

Experimental Investigation and Characterization of the Rotating Stall in a High Pressure Centrifugal Compressor: Part III — Influence of Diffuser Geometry on Stall Inception and Performance (2nd Impeller Tested)

Giovanni Ferrara, Lorenzo Ferrari, L. Baldassarre, 2003 .

Thermoeconomic optimization method as design tool in gas–steam combined plant realization

Giovanni Ferrara, Bruno Facchini, L. Attala, 2001 .

Fine-tuning of a two stoke engine in full power configuration provided with a Low Pressure Direct Injection system

Giovanni Ferrara, Francesco Balduzzi, Alessandro Bianchini, 2017 .

Low Solidity Vaned Diffusers for Rotating Stall Prevention: Experimental Analysis of Some Design Parameters

Giovanni Ferrara, Lorenzo Ferrari, L. Baldassarre, 2004 .

An integrated design approach for turbocharger turbines based on the performance optimization in transitory conditions

Giovanni Ferrara, Andrea Arnone, Alessandro Bianchini, 2018 .

CFD Analysis of the Effect of the Injection Pressure on a Small 2S LPDI Engine

Giovanni Ferrara, Francesco Balduzzi, Giovanni Vichi, 2015 .

Aerodynamics of Darrieus Wind Turbines Airfoils During Start-Up

Giovanni Ferrara, Francesco Balduzzi, Lorenzo Ferrari, 2016 .

Application of Low Solidity Vaned Diffusers to Prevent Rotating Stall in Centrifugal Compressors: Experimental Investigation

Giovanni Ferrara, Lorenzo Ferrari, L. Baldassarre, 2003 .

A Systematic Approach to Estimate the Impact of the Aerodynamic Force Induced by Rotating Stall in a Vaneless Diffuser on the Rotordynamic Behavior of Centrifugal Compressors

Giovanni Ferrara, Giuseppe Vannini, Lorenzo Ferrari, 2013 .

On the Use of Modern Engineering Codes for Designing a Small Wind Turbine: An Annotated Case Study

Giovanni Ferrara, Alberto Nocentini, Alessandro Bianchini, 2021, Energies.

Tailoring the actuator line theory to the simulation of Vertical-Axis Wind Turbines

Giovanni Ferrara, Francesco Balduzzi, Alessandro Bianchini, 2021 .

Discrete Wavelet Transform for the Real-Time Smoothing of Wind Turbine Power Using Li-Ion Batteries

Giovanni Ferrara, George Pechlivanoglou, Alessandro Bianchini, 2021, Energies.

Rotating Stall in Centrifugal Compressor Vaneless Diffuser: Experimental Analysis of Geometrical Parameters Influence on Phenomenon Evolution

Giovanni Ferrara, Lorenzo Ferrari, L. Baldassarre, 2004 .

Development of a Low Pressure Direct Injection System for a Small 2S Engine. Part II - Experimental Analysis of the Engine Performance and Pollutant Emissions

Giovanni Ferrara, Francesco Balduzzi, Giovanni Vichi, 2015 .

Energy recovery by means of a radial piston expander in a CO2 refrigeration system

Giovanni Ferrara, Daniele Fiaschi, Lorenzo Ferrari, 2016 .

An Experimental Methodology for the Reconstruction of Three-Dimensional Acoustic Pressure Fields in Ducts

Giovanni Ferrara, Lorenzo Ferrari, Giulio Lenzi, 2014 .

Blade cooling improvement for heavy duty gas turbine: the air coolant temperature reduction and the introduction of steam and mixed steam/air cooling

Giovanni Ferrara, Bruno Facchini, Luca Innocenti, 2000 .

Analysis of the Rotordynamic Response of a Centrifugal Compressor Subject to Aerodynamic Loads Due to Rotating Stall

Giovanni Ferrara, Giuseppe Vannini, Lorenzo Ferrari, 2015 .

Experimental and Numerical Comparison of the Acoustic Performance of the Air Filter Box of a SI-ICE

Giovanni Ferrara, Giulio Lenzi, Daniela Siano, 2015 .

Some guidelines for the experimental characterization of vaneless diffuser rotating stall in stages of industrial centrifugal compressors

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2014 .

A Critical Analysis on Low-Order Simulation Models for Darrieus Vawts: How Much Do They Pertain to the Real Flow?

Giovanni Ferrara, Vincenzo Dossena, Francesco Balduzzi, 2018, Journal of Engineering for Gas Turbines and Power.

Combined Numerical and Experimental Study on the Use of Gurney Flaps for the Performance Enhancement of NACA0021 Airfoil in Static and Dynamic Conditions

Giovanni Ferrara, Christian Oliver Paschereit, Christian Navid Nayeri, 2021, Journal of Engineering for Gas Turbines and Power.

A reciprocating compressor hybrid model with acoustic FEM characterization

Giovanni Ferrara, Lorenzo Ferrari, Giovanni Galoppi, 2016 .

Experimental Analysis of the Pressure Field Inside a Vaneless Diffuser From Rotating Stall Inception to Surge

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2015 .

DETAILED ANALYSIS OF THE WAKE STRUCTURE OF A STRAIGHT-BLADE H-DARRIEUS WIND TURBINE BY MEANS OF WIND TUNNEL EXPERIMENTS AND CFD SIMULATIONS

Giovanni Ferrara, Vincenzo Dossena, Giacomo Bruno Azzurro Persico, 2017 .

Rotating stall in centrifugal compressor vaneless diffuser: experimental analysis and phenomenon characterization

Giovanni Ferrara, Maurizio De Lucia, Lorenzo Ferrari, 2002 .

Small Wind Turbines in the Built Environment: Influence of Flow Inclination on the Potential Energy Yield

Giovanni Ferrara, Lorenzo Ferrari, Alessandro Bianchini, 2014 .

A Semi-Analytical Approach to Emissions Prediction in Gas Turbine Combustors

Giovanni Ferrara, Bruno Facchini, Paolo Mazzilli, 1998 .