Young-Kyun Kim

发表

Selective laser melted equiatomic CoCrFeMnNi high-entropy alloy: Microstructure, anisotropic mechanical response, and multiple strengthening mechanism

Kee‐Ahn Lee, Young-Kyun Kim, Jungho Choe, 2019, Journal of Alloys and Compounds.

Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing

B. Almangour, D. Grzesiak, Young-kyun Kim, 2019, Composites Part B: Engineering.

In-situ carbide-reinforced CoCrFeMnNi high-entropy alloy matrix nanocomposites manufactured by selective laser melting: Carbon content effects on microstructure, mechanical properties, and deformation mechanism

Ji-Hun Yu, Hyoung-Seop Kim, Young-kyun Kim, 2021 .

Elevated temperature compressive deformation behaviors of γ-TiAl-based Ti–48Al–2Cr–2Nb alloy additively manufactured by electron beam melting

Young-kyun Kim, Kee‐Ahn Lee, Seong-Woong Kim, 2020 .

Improvement in the Mechanical Properties of Additively Manufactured Ni–Co‐Based Superalloy by Tailoring Microstructures

Young-kyun Kim, Kee‐Ahn Lee, Jung-Uk Lee, 2021, Advanced Engineering Materials.

In-situ formed oxide enables extraordinary high-cycle fatigue resistance in additively manufactured CoCrFeMnNi high-entropy alloy

Sangsun Yang, Kee‐Ahn Lee, M. Baek, 2021 .

Superior Temperature-Dependent Mechanical Properties and Deformation Behavior of Equiatomic CoCrFeMnNi High-Entropy Alloy Additively Manufactured by Selective Laser Melting

Sangsun Yang, Young-kyun Kim, Kee‐Ahn Lee, 2020, Scientific Reports.

Effects of hot isostatic pressing treatment on the microstructure and tensile properties of Ni-based superalloy CM247LC manufactured by selective laser melting

S. Seo, Young-kyun Kim, Jung-Uk Lee, 2022, Materials Science and Engineering: A.

Effect of post-treatment on the microstructure and high-temperature oxidation behaviour of additively manufactured inconel 718 alloy

Sangsun Yang, Kee‐Ahn Lee, B. AlMangour, 2019, Corrosion Science.

Compressive creep behavior of selective laser melted CoCrFeMnNi high-entropy alloy strengthened by in-situ formation of nano-oxides

Sangsun Yang, Young-kyun Kim, Kee‐Ahn Lee, 2020 .

High-cycle fatigue and tensile deformation behaviors of coarse-grained equiatomic CoCrFeMnNi high entropy alloy and unexpected hardening behavior during cyclic loading

Hyoung-Seop Kim, Kee‐Ahn Lee, Hyoung Seop Kim, 2019, Intermetallics.

Characteristics of hydrothermal stability and machinability of t-ZrO2/Al2O3 composites as a femoral head for total hip replacements

D. Lee, Young-Kyun Kim, H. Lim, 2008 .

Effect of carrier gas species on the microstructure and compressive deformation behaviors of ultra-strong pure copper manufactured by cold spray additive manufacturing

Kee‐Ahn Lee, Young-Kyun Kim, 2021, Journal of Materials Science & Technology.

Tensile and Compressive Deformation Behaviors of High-Strength Cu Bulk Material Manufactured by Cold Spray

Kee‐Ahn Lee, Young-Kyun Kim, 2020 .

Effect of Strain Rate on the Microstructure Evolution and Compressive Deformation Behavior of High-Strength Cu Bulk Material Manufactured by Cold Spray Process

Kee‐Ahn Lee, M. Baek, Young-Kyun Kim, 2019, Journal of Thermal Spray Technology.

Microstructure and Room Temperature Compressive Deformation Behavior of Cold-Sprayed High-Strength Cu Bulk Material

Chan-hee Park, Kee‐Ahn Lee, Kyu‐Sik Kim, 2017, Journal of Thermal Spray Technology.

Selective laser melted CrMnFeCoNi + 3 wt% Y2O3 high-entropy alloy matrix nanocomposite: Fabrication, microstructure and nanoindentation properties

Sangsun Yang, Hyunjoo Choi, Young-kyun Kim, 2021 .

Tuning the Microstructure and Mechanical Properties of Cold Sprayed Equiatomic CoCrFeMnNi High-Entropy Alloy Coating Layer

Young-kyun Kim, Kee‐Ahn Lee, Ji-Eun Ahn, 2020, Metals and Materials International.

Effect of Ti Addition on the Microstructure and High-Temperature Oxidation Property of AlCoCrFeNi High-Entropy Alloy

Y. Na, Kee‐Ahn Lee, G. Ham, 2020, Metals and Materials International.

High temperature oxidation behavior of Cr-Mn-Fe-Co-Ni high entropy alloy

Hyoung-Seop Kim, Young-kyun Kim, Kee‐Ahn Lee, 2018, Intermetallics.

Effect of post-heat treatment on the thermophysical and compressive mechanical properties of Cu-Ni-Sn alloy manufactured by selective laser melting

Kee‐Ahn Lee, Sun-hong Park, Young-Kyun Kim, 2020 .

Improved mechanical and thermophysical properties of additively manufactured Cu-Ni-Sn-P alloy by using aging treatment

Young-kyun Kim, Kee‐Ahn Lee, Sun-hong Park, 2021 .

Improvement in the high temperature mechanical properties of additively manufactured Ti–48Al–2Cr–2Nb alloy using heat treatment

Hyoung-Seop Kim, Kee‐Ahn Lee, S. Youn, 2023, Intermetallics.

Influence of warm caliber rolling on tensile response and high cycle fatigue behavior of hypereutectoid steel

J. Kim, Kee‐Ahn Lee, Kyu‐Sik Kim, 2020 .

Hot-Rolling and a Subsequent Direct-Quenching Process Enable Superior High-Cycle Fatigue Resistance in Ultra-High Strength Low Alloy Steels

T. Park, Kee‐Ahn Lee, M. Baek, 2020, Materials.

Stabilized sub–grain and nano carbides–driven 1.2 GPa grade ultra–strong CrMnFeCoNi high–entropy alloy additively manufactured by laser powder bed fusion

Kee‐Ahn Lee, Young-Kyun Kim, 2022, Journal of Materials Science & Technology.

Solid-state cold spray additive manufacturing of pure tantalum with extraordinary high-temperature mechanical properties

Hyung-jun Kim, Kee‐Ahn Lee, Young-Kyun Kim, 2023, Journal of Materials Research and Technology.

Direct energy deposition of high strength austenitic stainless steel matrix nanocomposite with superior ductility: Microstructure, tensile properties, and deformation behavior

Young-kyun Kim, Kee‐Ahn Lee, Young-Kyun Kim, 2021 .

1.45 GPa ultrastrong cryogenic strength with superior impact toughness in the in-situ nano oxide reinforced CrMnFeCoNi high-entropy alloy matrix nanocomposite manufactured by laser powder bed fusion

Young-kyun Kim, Kee‐Ahn Lee, Min-chul Kim, 2022 .

2.47 GPa grade ultra-strong 15Co-12Ni secondary hardening steel with superior ductility and fracture toughness

Jung hyo Park, Kee‐Ahn Lee, Kyu‐Sik Kim, 2021 .

Effect of Tailored Microstructures in CaO-Added AZ31 Extrusion Material on Tensile, High Cycle Fatigue and Fatigue Crack Propagation Properties

Kee‐Ahn Lee, S. Kim, H. Lim, 2021 .

Effect of milling temperatures on the microstructure and high temperature long-term oxidation resistance of oxide-dispersion strengthened steels

D. Seidman, J. Kim, Young-kyun Kim, 2020 .

Microstructure and Mechanical Properties of Carbon-Bearing Ultrahigh-Strength High Co-Ni Steel (AerMet 340) Fabricated via Laser Powder Bed Fusion

Sangsun Yang, Kee‐Ahn Lee, Kyu‐Sik Kim, 2021, Materialia.

Improvement in the high-temperature creep properties via heat treatment of Ti-6Al-4V alloy manufactured by selective laser melting

Ji-Hun Yu, Kee‐Ahn Lee, Soon-Hong Park, 2018 .

High-temperature creep behavior of gamma Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting

Kee‐Ahn Lee, Seong-Woong Kim, S. Youn, 2019, Materials Science and Engineering: A.

Effect of Repeated Laser Scanning on the Microstructure Evolution of Carbon-Bearing Martensitic Steel Manufactured by Laser Powder Bed Fusion: Quenching-Partitioning Drives Carbon-Stabilized Austenite Formation

Kee‐Ahn Lee, Kyu‐Sik Kim, Young-Kyun Kim, 2022, Additive Manufacturing.

Microstructure and High Temperature Oxidation Property of Fe–Cr–B Based Metal/Ceramic Composite Manufactured by Powder Injection Molding Process

T. Yoon, Kee‐Ahn Lee, Y. Joo, 2018, Metals and Materials International.

Microstructures, tensile properties, and strengthening mechanisms of novel Al-Mg alloys with high Mg content

Bonghwan Kim, Kee‐Ahn Lee, S. Kim, 2023, Journal of Alloys and Compounds.

Enhancing the creep resistance of electron beam melted gamma Ti–48Al–2Cr–2Nb alloy by using two-step heat treatment

Jae-Keun Hong, Young-kyun Kim, Kee‐Ahn Lee, 2020, Intermetallics.

Effect of gaseous hydrogen embrittlement on the mechanical properties of additively manufactured CrMnFeCoNi high-entropy alloy strengthened by in-situ formed oxide

J. Suh, Young-kyun Kim, Kee‐Ahn Lee, 2020 .

Interstitial carbon content effect on the microstructure and mechanical properties of additively manufactured NiCoCr medium-entropy alloy

Sangsun Yang, Young-kyun Kim, Kee‐Ahn Lee, 2022, Journal of Alloys and Compounds.

Superior Temperature-Dependent Mechanical Properties and Deformation Behavior of Equiatomic CoCrFeMnNi High-Entropy Alloy Additively Manufactured by Selective Laser Melting

Sangsun Yang, Kee‐Ahn Lee, Young-Kyun Kim, 2020, Scientific Reports.

Microstructural evolution and tensile property enhancement of low-cost Fe-24Mn-22Ni-12Cr medium-entropy alloy by cryogenic caliber rolling

J. Seol, Byeong-Joo Lee, Y. Na, 2023, Journal of Alloys and Compounds.

Superior resistance to high–temperature creep in an additively manufactured precipitation–hardened CrMnFeCoNi high–entropy alloy nanocomposite

Keeley Lee, Young-Kyun Kim, Ka Ram Lim, 2023, Materials & Design.

Microstructure and High Temperature Oxidation Properties of FE-CR-NI HK30 Alloy Manufactured by Metal Injection Molding

T. Yoon, Kee‐Ahn Lee, Dongwoo Wi, 2023, Archives of Metallurgy and Materials.