Gyuyong Kim

发表

Assessment of flexural toughness and impact resistance of bundle-type polyamide fiber-reinforced concrete

N. Gucunski, Jeongsoo Nam, Hongseop Kim, 2015 .

Effect of Pull-out Property by Shape and Mechanical Property of Reinforcing Fiber on the Flexural Behavior of Concrete

Jeongsoo Nam, Jung-Hyun Kim, Hongseop Kim, 2014 .

Autogenous shrinkage of concrete containing granulated blast-furnace slag

Gyu-Yong Kim, Kyu-Jung Lee, Kyuri Lee, 2006 .

Restrained shrinkage behavior of expansive mortar at early ages

Gyu-Yong Kim, Takafumi Noguchi, Ryoma Kitagaki, 2015 .

Evaluation of the mechanical properties of 200 MPa ultra-high-strength concrete at elevated temperatures and residual strength of column

N. Gucunski, Gyeongcheol Choe, Gyu-Yong Kim, 2015 .

Static mechanical properties and impact resistance of amorphous metallic fiber-reinforced concrete

Gyu-Yong Kim, Hongseop Kim, Jung-Hyun Kim, 2015 .

Polyamide Fiber Reinforced Shotcrete for Tunnel Application

WooSeok Kim, Wooseok Kim, Joongkyu Jeon, 2016, Materials.

Concrete Corrosion Cracking and Transverse Bar Strain Behavior in a Reinforced Concrete Column under Simulated Marine Conditions

Sangkyu Lee, Gyeongcheol Choe, Y. Shinohara, 2020, Applied Sciences.

Evaluation of concrete degradation depending on heating conditions by ultrasonic pulse velocity

N. Gucunski, Gyeongcheol Choe, Jeongsoo Nam, 2018 .

Frost resistance of polyvinyl alcohol fiber and polypropylene fiber reinforced cementitious composites under freeze thaw cycling

Gyu-Yong Kim, Jeongsoo Nam, Yukio Hama, 2016 .

Evaluation on Rear Fracture Reduction and Crack Properties of Cement Composites with High-Velocity Projectile Impact by Fiber Types

Jeongsoo Nam, Gyu-Yong Kim, Jung-Hyun Kim, 2015 .

Effects of the strain rate and fiber blending ratio on the tensile behavior of hooked steel fiber and polyvinyl alcohol fiber hybrid reinforced cementitious composites

Koichi Kobayashi, Sangkyu Lee, Jeongsoo Nam, 2020 .

Response of UHPFRC and HDFRC under static and high-velocity projectile impact loads

B. Lee, Gyu-Yong Kim, Jeong-Il Choi, 2018, Construction and Building Materials.

Strength development properties of geopolymer paste and mortar with respect to amorphous Si/Al ratio of fly ash

Bongsuk Cho, C. Chon, Bokyeong Lee, 2017 .

The Prediction Model of Carbonation Process by CO 2 Diffusion Using the Air Permeability Coefficient for Concrete

Ha-Won Song, Young-sun Kim, Suk-Pyo Kang, 2010 .

Strain rate effects on the compressive and tensile behavior of bundle-type polyamide fiber-reinforced cementitious composites

Sangkyu Lee, Gyeongcheol Choe, Jeongsoo Nam, 2019, Composites Part B: Engineering.

Compressive strength, resistance to chloride-ion penetration and freezing/thawing of slag-replaced concrete and cementless slag concrete containing desulfurization slag activator

Bongsuk Cho, Jeongsoo Nam, Bokyeong Lee, 2016 .

Effect of coarse aggregate type and loading level on the high temperature properties of concrete

Gyeongcheol Choe, Min-ho Yoon, Taegyu Lee, 2015 .

Effect of Elevated Temperature on Meso- and Micro-Structure and Compressive Strength of High-Strength Concrete and Mortar Containing Blast-Furnace Slag

S. Sawada, Gyeongcheol Choe, Norichika Kakae, 2018 .

Effect of amorphous metallic fiber on mechanical properties of high-strength concrete exposed to high-temperature

Sangkyu Lee, Gyeongcheol Choe, Jeongsoo Nam, 2019, Construction and Building Materials.

Evaluation on the Mechanical Properties of Strain Hardening Cement Composite by Mixing Method for Application at Building Construction Site

Jeongsoo Nam, Seung-Hoon Lee, Youngduck Kim, 2011 .

Effect of Injecting Epoxy Resin Adhesive into Cement Mortar on Tile Adhesion Performance

Sangkyu Lee, Gyeongcheol Choe, Jeongsoo Nam, 2020, Applied Sciences.

Direct Tensile Properties of Fiber-Reinforced Cement Based Composites according to the Length and Volume Fraction of Amorphous Metallic Fiber

Sangkyu Lee, Gyeongcheol Choe, Jeongsoo Nam, 2019 .

Comparative assessment of failure characteristics on fiber-reinforced cementitious composite panels under high-velocity impact

Y. Shinohara, Jeongsoo Nam, Gyu-Yong Kim, 2016 .

Mechanical properties of high-strength concrete subjected to high temperature by stressed test

Gyu-Yong Kim, Young-Sun Kim, Tae-Gyu Lee, 2009 .

An Experimental Study on the Influence of the Qualities of Ordinary Portland Cement on the Flowability of High flow Concrete

Sung-woo Choi, Gyuyong Kim, Deug-Hyun Ryu, 2012 .

Effect of aggregate on residual mechanical properties of heated ultra-high-strength concrete

M. Kanematsu, Y. Ohmiya, Young-sun Kim, 2016 .

Mechanical Properties of Concrete depending on Cooling Conditions After High Temperature Heating

Gyeongcheol Choe, Taegyu Lee, Gyuyong Kim, 2014 .

An Experimental Study on the Mechanical Properties of Concrete with High Temperatures and Cooling Conditions

Gyeongcheol Choe, Min-ho Yoon, Taegyu Lee, 2012 .

Effect of Aggregate on Mechanical Properties of Ultra-High Strength Concrete Exposed to High Temperature

Gyu-Yong Kim, Y. Ohmiya, Young-sun Kim, 2011 .

Mechanical Properties of Concrete on Cooling Conditions After High Temperature Heating

Taegyu Lee, Gyuyong Kim, C. W. Kang, 2014 .

Evaluation for Mechanical Properties of High Strength Concrete at High Temperature by Stressed Test and Unstressed Test

Chankyu Park, Gyu-Yong Kim, Seung-Hoon Lee, 2008 .

A Study on Thermal Efficiency of Heat Testing Machine for Heat Transfer of Concrete at High Temperature

Young-sun Kim, Taegyu Lee, Gyuyong Kim, 2010 .

Experimental Investigation on the Blast Resistance of Fiber-Reinforced Cementitious Composite Panels Subjected to Contact Explosions

Jeongsoo Nam, Hongseop Kim, Gyuyong Kim, 2017 .

Evaluation on the Blast Resistance of Fiber Reinforced Concrete

Hiroyuki Miyauchi, Gyu-Yong Kim, Young Seok Jeon, 2011 .

Effect of moisture migration and water vapor pressure build-up with the heating rate on concrete spalling type

Gyu-Yong Kim, Jeongsoo Nam, Gyeongcheol Choe, 2019, Cement and Concrete Research.

Mechanical properties of light weight concrete at elevated temperature

Gyeongcheol Choe, Min-ho Yoon, Taegyu Lee, 2015 .

Mechanical Properties of Epoxy Paint using Oxidized Graphene Nanoplatelet as a Reinforcement

Jeongsoo Nam, Bokyeong Lee, Gyu-Yong Kim, 2017 .

Effects of hydration heat velocity on autogenous shrinkage of high-strength concrete

K. Koo, Gyuyong Kim, 2013 .

Analysis of hydration heat and autogenous shrinkage of high-strength mass concrete

Gyu-Yong Kim, Jeongsoo Nam, Kyung-Mo Koo, 2011 .

Hydration Heat and Autogenous Shrinkage of High-Strength Mass Concrete Containing Phase Change Material

Bae-Su Khil, Euibae Lee, Young-sun Kim, 2010 .

Properties of Autogenous Shrinkage in High-Strength Mass Concrete According to Hydration Heat Velocity

H. Miyauchi, K. Koo, Gyuyong Kim, 2011 .

Effect of Types and Replacement Ratio of Alkali Activator on Compressive Strength of Ground Granulated Blast Furnace Slag Mortar

Bongsuk Cho, Bokyeong Lee, Rae-Hwan Kim, 2014 .

Characteristics of Autogenous Shrinkage for Concrete Containing Blast-Furnace Slag

Kwang-Myong Lee, Gyu-Yong Kim, K. Kwon, 2004 .

A study on the Estimation of the Wave Load on the Structure of wave Energy Converter connected to Rubble-Mound Breakwater

Kyong-Hwan Kim, Sewan Park, Jeong-Hwan Oh, 2021, Journal of the Korean Society for Marine Environment & Energy.

A Study on the Explosive Resistance of Fiber Reinforced Cement Composites Subjected to Contact Explosion

Jeongsoo Nam, Hongseop Kim, Y. Hama, 2014 .

Effects of the Use of Smartphones on Pain and Muscle Fatigue in the Upper Extremity

Gyu-Yong Kim, Chang-sik Ahn, Hyewon Jeon, 2012 .

Evaluation of Properties of 80, 130, 180 MPa High Strength Concrete at High Temperature with Heating and Loading

Gyeongcheol Choe, Gyu-Yong Kim, Min-ho Yoon, 2013 .

Effects of strain rate on the tensile behavior of cementitious composites made with amorphous metallic fiber

V. Mechtcherine, T. Noguchi, Sangkyu Lee, 2020 .

Improvement of the Early Age Strength of Low Cement Concrete Using High Volume Mineral Admixture

Gyu-Yong Kim, Dong Yub Song, Youngchan Song, 2012 .

Influence of hydrostatic pressure on chloride ion penetration of marine concrete

김경태, Jeongsoo Nam, Bokyeong Lee, 2019 .

Evaluation of properties of concrete using fluosilicate salts and metal （Ni, W） compounds

Gyu-Yong Kim, Bae-Su Khil, Seung-Hun Lee, 2009 .

Effect of aggregate on residual mechanical properties of heated ultra-high-strength concrete

M. Kanematsu, Y. Ohmiya, Gyuyong Kim, 2015, Materials and Structures.