Noel P. O’Dowd

发表

Limit Load Solution and Crack Driving Force Estimation Scheme for Embedded Flaws in Pipeline Girth Welds

Aurélien Pépin, Tomasz Tkaczyk, Noel P. O’Dowd, 2015 .

American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP: Foreword

Colin Scott, Jeffrey Fong, Noel P. O’Dowd, 2008 .

Thermomechanical Analysis of a Pressurised Pipe Under Plant Conditions

Noel P. O’Dowd, T. P. Farragher, S. Scully, 2011 .

Optimum design of forging dies using fuzzy logic in conjunction with the backward deformation method

Noel P. O’Dowd, Farid R. Biglari, R. T. Fenner, 1998 .

Preface to topical special issue of computational materials science on “Recent advances in computational mechanics of materials”

Siegfried Schmauder, Noel P. O’Dowd, 2013 .

Thermo-mechanical modelling of a single-bead-on-plate weld using the finite element method

Noel P. O’Dowd, Catrin M. Davies, X. Shan, 2009 .

Using finite element analysis to develop a digital twin of a manufacturing bending operation

Noel P. O’Dowd, E. P. Hinchy, Conor T. McCarthy, 2020 .

Low Cycle Fatigue of Subsea Mechanically Lined Pipeline With Liner Imperfections

Aurélien Pépin, Noel P. O’Dowd, Kamran Nikbin, 2017 .

Optimisation of Ultrasonically Welded Joints through Machine Learning

Noel P. O’Dowd, E. P. Hinchy, Conor T. McCarthy, 2020 .

Comparison of Fine and Conventional Blanking Based on Ductile Fracture Criteria

Noel P. O’Dowd, Kamran Nikbin, Mohammad Habibi Parsa, 2004 .

Fracture Assessment Procedures for Steel Pipelines Using a Modified Reference Stress Solution

Tomasz Tkaczyk, Noel P. O’Dowd, Kamran Nikbin, 2009 .

Theoretical and experimental simulation of accident scenarios of the Joint European Torus cryogenic components Part 2: The Lower Hybrid Current Drive cryopump

Noel P. O’Dowd, P A Ageladarakis, Gill A. Webster, 1998 .

Applications of two parameter approaches in elastic-plastic fracture mechanics

Noel P. O’Dowd, 1995 .

Modelling of damage development and failure in notched-bar multiaxial creep tests

Noel P. O’Dowd, Kamran Nikbin, Masataka Yatomi, 2004 .

Qualification of Reeled Mechanically Lined Pipes for Fatigue Service

Aurélien Pépin, Tomasz Tkaczyk, Noel P. O’Dowd, 2016 .

Theoretical and experimental simulation of accident scenarios of the Joint European Torus cryogenic components Part 1: The in-vessel cryopump

Noel P. O’Dowd, P A Ageladarakis, Gill A. Webster, 1998 .

Review of a procedure for performing constraint and attenuation-corrected fracture mechanics safety case calculations for Magnox reactor steel pressure vessels

Noel P. O’Dowd, F. M. Burdekin, Robert A. Ainsworth, 2005 .

Development of life assessment procedures for power plant headers operated under flexible loading scenarios

Noel P. O’Dowd, T. P. Farragher, Sean B. Leen, 2013 .

Comparison of Crack Driving Force Estimation Schemes For Weld Defects In Reeled Pipelines

Tomasz Tkaczyk, Noel P. O’Dowd, Brett Howard, 2007 .

Application of Limit Load Solutions for Engineering Critical Assessment of Embedded Flaws in Evenmatch Pipeline Girth Welds

Aurélien Pépin, Tomasz Tkaczyk, Noel P. O’Dowd, 2020 .

Fracture Assessment Procedures for Steel Pipelines Using a Modified Reference Stress Solution

Noel P. O’Dowd, Kamran Nikbin, Tomasz Tkaczyk, 2009 .

Multiaxial cyclic viscoplasticity model for high temperature fatigue of P91 steel

Noel P. O’Dowd, Sean B. Leen, T. P. Farragher, 2014 .

Measurement of residual stresses in T-plate weldments

Noel P. O’Dowd, Ej Kingston, David J. Smith, 2003 .

A multiscale approach for coupled phenomena in fcc materials at high temperatures

Noel P. O’Dowd, Esteban P. Busso, S. Dumoulin, 2003 .

J-integral analysis of heterogeneous mismatched girth welds in clamped single-edge notched tension specimens

Rudi Denys, Stijn Hertelé, Wim De Waele, 2014 .

Mechanistic Studies of High-Temperature Crack Initiation in Single Crystal Materials

Noel P. O’Dowd, Kamran Nikbin, N. O'Dowd, 2006 .

Thermomechanical Analysis of a Pressurized Pipe Under Plant Conditions

Noel P. O’Dowd, Sean B. Leen, T. P. Farragher, 2013 .

Numerical micromechanical investigation of interfacial strength parameters in a carbon fibre composite material

Noel P. O’Dowd, Conor T. McCarthy, C. McCarthy, 2014 .

Gradient-dependent deformation of two-phase single crystals

Noel P. O’Dowd, Esteban P. Busso, N. O'Dowd, 2000 .

Fracture mechanics analysis of heterogeneous welds: numerical case studies involving experimental heterogeneity patterns

Stijn Hertelé, Wim De Waele, Noel P. O’Dowd, 2015 .

Use of scaling functions to determine mechanical properties of thin coatings from microindentation tests

Noel P. O’Dowd, Esteban P. Busso, Karuna Tunvisut, 2001 .

High Temperature, Low Cycle Fatigue Characterization of P91 Weld and Heat Affected Zone Material

Noel P. O’Dowd, Sean B. Leen, T. P. Farragher, 2014 .

High Temperature, Low Cycle Fatigue Characterization of P91 Weld and Heat Affected Zone Material

Noel P. O’Dowd, Sean B. Leen, T. P. Farragher, 2013 .

Fully-Plastic Strain-Based J Estimation Scheme for Circumferential Surface Cracks in Pipes Subjected to Reeling

Noel P. O’Dowd, Claudio Ruggieri, Luís F. S. Parise, 2015 .

A Unified Viscoplastic Model for High Temperature Low Cycle Fatigue of Service-Aged P91 Steel

Noel P. O’Dowd, Sean B. Leen, T. P. Farragher, 2014 .

Effect of Precipitate Morphology on the Gradient-Dependent Behaviour of Two-Phase Single Crystals

Noel P. O’Dowd, Esteban P. Busso, N. O'Dowd, 1999 .

Elastic-plastic analysis of biaxially loaded center-cracked plates

Noel P. O’Dowd, V. P. Naumenko, O. Kolednik, 1999 .

Mixed-mode fracture toughness of ceramic materials

Noel P. O’Dowd, Subra Suresh, C. F. Shih, 1990 .

A Framework for Quantifying Crack Tip Constraint

Noel P. O’Dowd, Mt Kirk, C. Shih, 1993 .

Constraint in the failure assessment diagram approach for fracture assessment

Noel P. O’Dowd, R. A. Ainsworth, R. Ainsworth, 1995 .

Prediction of cleavage failure probabilities using the Weibull stress

Noel P. O’Dowd, Esteban P. Busso, Y. Lei, 2000 .

Numerical study of sliding wear caused by a loaded pin on a rotating disc

Noel P. O’Dowd, Wenyi Yan, Esteban P. Busso, 2002 .

Determination of the mechanical properties of metallic thin films and substrates from indentation tests

Noel P. O’Dowd, Esteban P. Busso, E. Busso, 2002 .

Creep crack growth prediction using a damage based approach

Noel P. O’Dowd, Kamran Nikbin, Masataka Yatomi, 2003 .

Methodology for Assessment of Surface Defects in Undermatched Pipeline Girth Welds

Aurélien Pépin, Tomasz Tkaczyk, Noel P. O’Dowd, 2015 .

Failure assessment diagram analysis of creep crack initiation in 316H stainless steel

Robert A. Ainsworth, Noel P. O’Dowd, Kamran Nikbin, 2003 .

A generic approach for a linear elastic fracture mechanics analysis of components containing residual stress

Noel P. O’Dowd, Kamran Nikbin, Hyeong Y. Lee, 2005 .

Analysis of Creep Crack Initiation and Growth in Different Geometries for 316H and Carbon Manganese Steels

Noel P. O’Dowd, Kamran Nikbin, G. A. Webster, 2006 .

Experimental Evaluation of the J or C * Parameter for a Range of Cracked Geometries

Noel P. O’Dowd, Kamran Nikbin, Miltiadis Kourmpetis, 2006 .

Effects of pipe steel heterogeneity on the tensile strain capacity of a flawed pipeline girth weld

Rudi Denys, Stijn Hertelé, Wim De Waele, 2014 .

Comparison of methods for obtaining crack-tip stress distributions in an elastic-plastic material

Noel P. O’Dowd, Farid R. Biglari, Catrin M. Davies, 2005 .

Length scale effects on the geometric softening of precipitated single crystals

Noel P. O’Dowd, Esteban P. Busso, D. Nouailhas, 1998 .

Effect of Thermomechanical Loading on Near Tip Constraint

Noel P. O’Dowd, J. D. G. Sumpter, 1996 .