Kaoru Iwamoto

发表

A Development of the New Pile Head Joint (Named P/R-Pile) : Part-3 Verification of Performance by Site Full-scale Experiment

Hideichi Tsuji, Toshihiro Ono, Kaoru Iwamoto, 1999 .

CHANGE IN DYNAMIC CHARACTERISTICS AND MICROSCOPIC STRUCTURE OF FIBER-REINFORCED CONCRETE SUBJECTED TO FREEZING AND THAWING

Mitsuyasu Mashima, Kaoru Iwamoto, Takeshi Sagayama, 1996 .

Experimental Study on Turbulent Drag Reduction and Polymer Concentration Distribution with Blowing Polymer Solution from the Channel Wall(Summaries of Papers published by Staff of National Maritime Research Institute at Outside Organizations)

Masaaki Motozawa, Yasuo Kawaguchi, Hirotomo Ando, 2010 .

THE TRANSFORMATION OF THE CASTLE CITY AND THE EDO ESTATE CAUSED BY THE "JOFU" SYSTEM OF MITO-HAN

Kaoru Iwamoto, 2002 .

A STUDY ON THE STRUCTURE OF THE SPACE OF KOFU CASTLE CITY UNDER THE DIRECT CONTROL OF THE TOKUGAWA SHOGUNATE : Through an analysis of the samurai residencial area

Kaoru Iwamoto, 2003 .

THE PROCESS OF ACQUIREMENT OF RESIDENCES IN EDO BY THE TOKUGAWA SHOGUNATE RETAINERS WHO CAME FROM KISHU-HAN

Kaoru Iwamoto, 2002 .

ALKALI RESISTANCE OF FIBER REINFORCED PLASTIC FOR CONCRETE STRUCTURES

Atsushi Hattori, Kaoru Iwamoto, Toyo Miyagawa, 1995 .

FLEXURAL FATIGUE BEHAVIOR OF PRESTRESSED CONCRETE BEAMS WITH NON-METALLIC FIBER TENDON UNDER ATMOSPHERE AND WATER

Nobuaki Takagi, Takayuki Kojima, Kaoru Iwamoto, 1999 .

Design of the Material Balances Table for Evaluation of Regional Waste Management

Tomohiro Tabata, Takaaki Okuda, Kaoru Iwamoto, 2003 .

Development of mechatronic system of pulsation flow for mechanics evaluation of arterial vessel

Keiichi Tanabe, Kaoru Iwamoto, Takashi Saito, 2012 .

Direct Numerical Simulation of Turbulent Heat Transfer Behind a Rectangular Orifice

Hiroshi Kawamura, Kaoru Iwamoto, Soihiro Makino, 2008 .

PLIF Measurement of Turbulent Diffusion in Drag Reducing Flow with Blown Polymer Solution from the Wall(Summaries of Papers published by Staff of National Maritime Research Institute at Outside Organizations)

T. Otuki, Masaaki Motozawa, Yasuo Kawaguchi, 2012 .

Effect of Number of Tube Rows on Heat Transfer Enhancement and Flow Field with Different Vortex Generator Geometries in Fin-And-Tube Heat Exchangers

Hiroshi Saito, Kaoru Iwamoto, Akira Murata, 2010 .

Go for Beginners

Kaoru Iwamoto, K. Iwamoto, 1976 .

0518 Proposal of Estimation Formula of Flow Resistance of Rough Wall Surface based on the Measurements of Velocity around the rib :Verification by using two dimensional regularly distributed ribs on the surface

Masaaki Motozawa, Yasuo Kawaguchi, Hirotomo Ando, 2013 .

Drag reduction for ships due to polymer release from painted surface by Toms effect(Summaries of Papers published by Staff of National Maritime Research Institute at Outside Organizations)

Masaaki Motozawa, Yasuo Kawaguchi, Hirotomo Ando, 2010 .

Experimental Investigation on Turbulent Structure of Drag Reducing Channel Flow with Blowing Polymer Solution from the Wall(Summaries of Papers published by Staff of National Maritime Research Institute at Outside Organizations)

Masaaki Motozawa, Yasuo Kawaguchi, Hirotomo Ando, 2012 .

Change in Dynamic Characteristics and Microscopic Structure of Fiber-Reinforced Concrete Subjected to Freezing and Thawing Kaoru IWAMOTO, Takeshi SAGAYAMA and Mitsuyasu MASHIMA

Noboru Saeki, Mitsuyasu Mashima, Kaoru Iwamoto, 1998 .

Relationship between Vortex Structure and Reynolds Shear Stress of Turbulent Drag Reducing Flow with Blowing Polymer Solution from the Wall(Summaries of Papers published by Staff of National Maritime Research Institute at Outside Organizations)

Masaaki Motozawa, Yasuo Kawaguchi, Hirotomo Ando, 2011 .

Prediction of the drag reduction effect of pulsating pipe flow based on machine learning

Wataru Kobayashi, Kaoru Iwamoto, Akira Murata, 2021 .

EVOLUTION OF MATERIAL LINE IN TURBULENT CHANNEL FLOW

Hiroshi Kawamura, Kaoru Iwamoto, Takahiro Tsukahara, 2007 .

Heat and fluid flow in cylindrical and conical annular flow-passages with through flow and inner-wall rotation

Kaoru Iwamoto, Akira Murata, A. Murata, 2011 .

Effects of Surface Geometry on Film Cooling Performance at Airfoil Trailing Edge

Chiyuki Nakamata, Yoji Okita, Kaoru Iwamoto, 2012 .

2D-PTV MEASUREMENT OF EXPANDING CONCENTRIC ANNULAR FLOW WITH A ROTATING INNER WALL

Kaoru Iwamoto, Akira Murata, Hiroshi Saito, 2010 .

Contribution of Reynolds stress distribution to the skin friction in wall-bounded flows

Koji Fukagata, Nobuhide Kasagi, Kaoru Iwamoto, 2002 .

Friction drag reduction achievable by near-wall turbulence manipulation at high Reynolds numbers

Koji Fukagata, Nobuhide Kasagi, Kaoru Iwamoto, 2005 .

FLOW VISUALIZATION USING HYDROGEN BUBBLE TECHNIQUE OF A FIN-AND-TUBE TYPE HEAT EXCHANGER WITH PUNCHED-OUT VORTEX GENERATORS

Sadanari Mochizuki, Kaoru Iwamoto, Akira Murata, 2010 .

Experimental Investigation on Turbulent Structure of Drag Reducing Channel Flow with Blowing Polymer Solution from the Wall

Masaaki Motozawa, Yasuo Kawaguchi, Hirotomo Ando, 2012 .

Effects of Vortex Generator Arrangements on Heat Transfer Enhancement over a Two-Row Fin-and-Tube Heat Exchanger

Sadanari Mochizuki, Kaoru Iwamoto, Akira Murata, 2009 .

Direct Numerical Simulation of Turbulent Channel Flow at Re τ 2320

Nobuhide Kasagi, Kaoru Iwamoto, Yuji Suzuki, 2005 .

Structure of Low-Speed Streaks in Drag Reducing Flow With Polymer Solution Blown From the Channel Wall

Bo Yu, Masaaki Motozawa, Yasuo Kawaguchi, 2011 .

Reynolds Number Effect on Wall Turbulence: Toward Effective Feedback Control

Nobuhide Kasagi, Kaoru Iwamoto, Yuji Suzuki, 2002 .

Dynamical Roles of Large-Scale Structures in Turbulent Channel Flow

Nobuhide Kasagi, Kaoru Iwamoto, Yuji Suzuki, 2004 .