Chenzeng Zhang

发表

Microstructure and Mechanical Properties at Elevated Temperature of Powder Metallurgy Al-Zn-Mg-Cu Alloy Subjected to Hot Extrusion

Zhimeng Guo, Cun-guang Chen, Fang Yang, 2022, Metals.

Suppression of Secondary Electron Emission on Oxygen-Free Copper Surface of Reduced Graphene Oxide Coatings Prepared by Electrophoretic Deposition

Mengjie Yan, Chenzeng Zhang, P. Pan, 2022, SSRN Electronic Journal.

Understanding processing map and microstructural evolution of powder metallurgy Ti-6Al-4V within a wide range of deformation temperatures

Zhimeng Guo, Cun-guang Chen, Fang Yang, 2022, Journal of Alloys and Compounds.

Fine duplex Ti-48Al alloy with high strength produced by forging based on near-γ microstructure

Zhimeng Guo, Cun-guang Chen, Mengjie Yan, 2023, Journal of Alloys and Compounds.

The “pinning” effect of in-situ TiB whiskers on the hot deformation behavior and dynamic recrystallization of (10 vol%) TiB/Ti-6Al-4V composites

Zhimeng Guo, Cun-guang Chen, Fang Yang, 2022, Journal of Materials Research and Technology.

W and TiO2 particles synergistic strengthened Cu matrix nanocomposites by mechano-chemical method

Pei Li, Zhimeng Guo, Cun-guang Chen, 2020, Powder Metallurgy.

FeSiBCrC amorphous magnetic powder fabricated by gas-water combined atomization

A. Volinsky, Xiao-Jie Wu, J. Hao, 2020, Journal of Alloys and Compounds.

Enhanced mechanical and electrical properties of in situ synthesized nano-tungsten dispersion-strengthened copper alloy

C. Suryanarayana, Zhimeng Guo, Cun-guang Chen, 2021 .

Suppression of secondary electron emission of oxygen free copper by two-step electrodeposition of rGO/Cu composite coating

Yang Li, Yunkun Lu, Mengjie Yan, 2022, Applied Surface Science.

Microstructure and mechanical properties of Co-containing Ti-48Al alloys prepared from irregular pre-alloyed powder

Hongtao Zhang, Zhimeng Guo, Cun-guang Chen, 2022, Journal of Alloys and Compounds.

Effects of ball milling on powder particle boundaries and properties of ODS copper

Haifeng Zhang, Zhimeng Guo, Cun-guang Chen, 2021, High Temperature Materials and Processes.

High Strength and High Electrical Conductivity in Cu-Fe Alloys with Nano and Micro Fe Particles

Zhimeng Guo, Cun-guang Chen, Mengjie Yan, 2022, SSRN Electronic Journal.

Microstructure and properties evolution of rolled powder metallurgy Cu-30Fe alloy

A. Volinsky, Zhimeng Guo, Cun-guang Chen, 2022, Journal of Alloys and Compounds.

Microstructure and properties of Cu-Fe alloys fabricated via powder metallurgy and rolling

A. Volinsky, Zhimeng Guo, Lina Huang, 2021, Powder Metallurgy.

Multiple intermetallic compounds reinforced Ti–48Al alloy with simple composition and high strength

Zhimeng Guo, Cun-guang Chen, Mengjie Yan, 2022, Materials Science and Engineering: A.

Superior mechanical properties and microstructural evolution of powder metallurgy 2195 Al-Li alloy subjected to hot extrusion

Zhimeng Guo, Cun-guang Chen, Mengjie Yan, 2023, Journal of Alloys and Compounds.

Microstructure Evolution and Strength Mechanism of Metastable Powder Metallurgy Ti-6554 Titanium Alloys Under Different Heat Treatment Conditions

Zhimeng Guo, Lili Guo, Cun-guang Chen, 2023, JOM.