Anirban Guha

发表

Performance of neural networks for predicting yarn properties using principal component analysis

R. Chattopadhyay, Anirban Guha, Jayadeva, 2004 .

Multibody Modeling of Direct and Cross-Axis Seat to Head Transmissibility of the Seated Human Body Supported with Backrest and Exposed to Vertical Vibrations

P. Seshu, Anirban Guha, Raj Desai, 2021 .

Packing Boxes into Multiple Containers Using Genetic Algorithm

Anirban Guha, Deepak Menghani, A. Guha, 2016 .

Solar PV Integrated Lighter-Than-Air Platform (LTAP) for Airborne Power Generation

Anirban Guha, Siddhartha P. Duttagupta, Kuntal Ghosh, 2014 .

Damage identification in aluminum beams using support vector machine: Numerical and experimental studies

Anirban Guha, Sauvik Banerjee, Satish B Satpal, 2016 .

A Simple Strategy for Tyre Force Distribution to Improve the Performance of a Four Wheel Independent Steerbywire Vehicle

Anirban Guha, P. Seshu, Mahek Mody, 2015 .

Power generation on a solar photovoltaic array integrated with lighter-than-air platform at low altitudes

Anirban Guha, Siddhartha P. Duttagupta, Kuntal Ghosh, 2017 .

Lateral Tyre Force Distribution for Four-Wheel Steer-by-Wire Vehicles

Anirban Guha, Saaransh Pandoh, Pasumarthy Seshu, 2020 .

Introduction of Injection Technology in Tata Steel as a Technique for Maintenance of Blast Furnace Stack

Anirban Guha, Sushanta K. Mitra, Ramesh Singh, 1993 .

Performance of Monolithic Plate and Layered Plates Under Blast Load

Anirban Guha, R. K. Singh, D. K. Sahoo, 2017 .

A solar PV integrated contoured kite as a hybrid power generating system

Anirban Guha, Siddhartha P. Duttagupta, Kuntal Ghosh, 2016, 2016 7th India International Conference on Power Electronics (IICPE).

Equation-based domain knowledge utilization into neural network structure and learning

Anirban Guha, Shrinivas Kulkarni, 2018, J. Syst. Control. Eng..

Multibody Biomechanical Modelling of Human Body Response to Vibrations in an Automobile

Anirban Guha, P. Seshu, Raj Desai, 2019 .

Predicting Yarn Tenacity: A Comparison of Mechanistic, Statistical, and Neural Network Models

R. Chattopadhyay, Anirban Guha, Jayadeva, 2001 .

VIBRATION BASED HEALTH MONITORING OF HONEYCOMB CORE SANDWICH PANELS USING SUPPORT VECTOR MACHINE

Saurabh Gupta, Anirban Guha, Sauvik Banerjee, 2016 .

Conceptual Design and Sizing of a Wing-Tip Extension Mechanism for HALE UAV

Anirban Guha, Rajkumar S. Pant, Chandra Sekher Yerramalli, 2019, 2019 International Conference on Nascent Technologies in Engineering (ICNTE).

Damage Characteristics and Microstructure Response of Steel Alloy Q235B Subjected to Simulated Lightning Currents

Xin Gao, Anirban Guha, Zhengcai Fu, 2019, IEEE Access.

A Study on the Capability of a Neural Network Ranking Fibre Parameters Having an Influence on Yarn Properties

R. Chattopadhyay, Anirban Guha, Jayadeva, 2003 .

Cloth roll doffing machine for Indian powerloom industry

Prateek Sharma, Anirban Guha, N Ramakrishnan, 2008 .

Sensitivity Analysis of Cable Actuations for Moving a Tensegrity Mechanism Along a Specified Path

Anirban Guha, Pramod Kumar Malik, Keshab Patra, 2020 .

Structural health monitoring of a cantilever beam using support vector machine

Anirban Guha, Sauvik Banerjee, Satish B Satpal, 2013 .

Performance evaluation and enhancement of artificial neural networks in prediction modelling

Anirban Guha, 2011 .

Measurement of yarn hairiness by digital image processing

Anirban Guha, C. Amarnath, S. Pateria, 2010 .

Modelling and simulation of an integrated human-vehicle system with non-linear cushion contact force

P. Seshu, Anirban Guha, Raj Desai, 2021, Simul. Model. Pract. Theory.

Kinematic analysis and design optimisation of a surgical rod cutter for shearing of Ti6Al4V rods

Anirban Guha, Ramesh Singh, Lohit Dhamija, 2012 .

Briquette Compacting Machine: A Design for Rural Applications

Anirban Guha, C. Amarnath, 2019 .

Design Optimization of Rocker Bogie System and Development of Look-Up Table for Reconfigurable Wheels for a Planetary Rover

Anirban Guha, A. Kshirsagar, 2016 .

CMOS ASIC Design of a High Performance Digital Fuzzy Processor That Can Compute on Arbitrary Membership Functions

Shubhajit Roy Chowdhury, Anirban Guha, 2013, VDAT.

A Methodology for Diagnosis of Damage by Machine Learning Algorithm on Experimental Data

Anirban Guha, Sauvik Banerjee, Abhijeet Kumar, 2021 .

An appropriate biomechanical model of seated human subjects exposed to whole-body vibration

Anirban Guha, Raj Desai, Pasumarthy Seshu, 2021, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics.

A Comparison of Quarter, Half and Full Car Models for Predicting Vibration Attenuation of an Occupant in a Vehicle

P. Seshu, Anirban Guha, Raj Desai, 2021 .

Modelling and simulation of active and passive seat suspensions for vibration attenuation of vehicle occupants

P. Seshu, Anirban Guha, Raj Desai, 2021, International Journal of Dynamics and Control.

Numerical simulation of high-speed turbulent water jets in air

Anirban Guha, Ronald M. Barron, Ram Balachandar, 2010, 1003.2279.

Microstructural damage dependent stiffness prediction of unidirectional CFRP composite under cyclic loading

Anirban Guha, K. Senthilnathan, N. K. Naik, 2017 .

Experimental and analytical investigation on metal damage suffered from simulated lightning currents

Anirban Guha, Zhengcai Fu, Quanzhen Liu, 2017 .

A single variable refined theory for free vibrations of a plate using inertia related terms in displacements

Anirban Guha, R. P. Shimpi, R. Shimpi, 2017 .

Power generation on a solar photovoltaic modules integrated Lighter-than-Air Platform at a low altitude

Anirban Guha, Kuntal Ghosh, S. Duttagupta, 2016 .